PCI Board 8-Analog Output Keithley KPCI-3132

Code: Keithley KPCI-3132


 

Datasheet PDF, 0.23 Mb

Description

  • 20mA output current without power supply
  • 2 analog outputs
  • Remote sensing
  • Wide 20-bit resolution for any application
  • Automatic fault-circuit detection with 4-wire source
  • Compatible with SSIO-24 and PB-24SM
  • 32-bit DriverLINX® drivers plus a suite of bundled software including ExceLINX™, VisualSCOPE™, TestPoint™, and LabVIEW® drivers
 

More products KEITHLEY

DIGITAL SOURCE METER 6.5 DIGIT AIRBAG TEST SYSTEM KEITHLEY DMM 2000

• 6.5 digit DMM
• Single-instrument solution for continuity and hi-pot type leakage resistance measurements
• Programmable constant V source (50-500V) supports high speed, high resistance measurements
• Programmable constant I source (0-50mA) with dry circuit clamp helps prevent device stress or damage during low resistance measurements

 

DIGITAL MULTIMETER 6.5 DIGIT AND THD AUDIO ANALYZER KEITHLEY 2016

• 6.5 digit DMM
• THD, THD+Noise and SINAD measurements
• 20Hz-20kHz sine wave generator
• 9.5Vrms single-ended or 19Vrms differential output
• Identifies peak spectral components(2016-P model)

 

6-SLOT MODULAR SYSTEM SWITCH, DMM KEITHLEY 3706

• Multiplexer, matrix, and I/O cards
• Relay closures automatically counted and stored in each card's onboard memory

 

HIGH VOLTAGE POWER SUPPLY 5 KV KEITHLEY 248

• Source voltages up to 5kV, negative or positive polarity
• Up to 5mA compliance current
• Low output ripple for precision sourcing


KEITHLEY DMM7510 PRECISION MULTIMETER 7.5-DIGIT LABORATORY BENCH

• 0.0014% DCV accuracy (one year)
• 1,000,000 readings/s digitizer
• Touchscreen display
• DC voltage sensitivity: 10 nV
• Current sensitivity: 1 pA
• Resistance sensitivity: 0.1 µΩ

 

LOW CURRENT PHOTODIODE PICOAMMETER 2 CHANNLES KEITHLEY 2502

• Dual-channel instrument for optical power measurements, beam measurements, and nanoscale materials and device research
• ±100V source for bias requirements
• Measure photodetector current from 1fA to 20mA
• 1fA current measurement resolution

 

DATA ACQUISITION CARD PCI 32-CHANNELS 250KSA/S KEITLHEY KPCI-3116

• 16-bit resolution
• Input speeds of up to 250kS/s
• Output speeds of up to 200kS/s
• Digital I/O scanning speeds of up to 3MHz
• 32 single-ended or 16 differential analog inputs
• 16 digital I/O lines
• 2 analog outputs, waveform quality, 200kS/s

 

USB MODULAR DATA ACQUISITION UNIT USB 16-CHANNELS 100KSA/S KEITLHEY KUSB-3102

• USB 2.0 and USB 1.1, true plug-and-play compatibility
• 16 SE/pseudo-DI/ 8 DI analog input channels
• 12-bit resolution
• High and low programmable gains
• Input/output speeds up to 100kS/s
• Up to 17 digital I/O lines

 

PRECISION AC AND DC CURRENT SOURCE KEITHLEY 6221

• Source and sink (programmable load) 100fA to 100mA
• 10^14 O output impedance ensures stable current sourcing into variable loads
• Source AC currents from 2pA to 100mA for AC characterization of components and materials

 

USB MODULAR DATA ACQUISITION UNIT USB 16-CHANNELS 500KSA/S KEITLHEY KUSB-3116

• USB 2.0 and USB 1.1, true plug-and-play compatibility
• 16 SE/ 8 DI analog input channels
• 16-bit resolution
• High and low programmable gains
• Input/output speeds up to 500kS/s
• Up to 33 digital I/O lines