High Voltage Lighting Surge Simulator NoiseKen LSS-F02 pulse impulse EMC electromagnetic compatibility test
ROM
ENGEMC & EMI Test > NOISEKEN (13) > High Voltage Lighting Surge Simulator NoiseKen LSS-F02
- Oscilloscopes
- Multimeters
- Signal Generators
- Spectrum Analyzers
- Universal Frequency Counters
- Power Supplies
- Electronic Loads
- Logic Analyzers
- Data Acquisition Modules
- LCR Analysis & Power Analyzers
- Power Quality Analyzers
- Electrical Installations Testers
- Earth Resistance Ground Testers
- Current Clamp Meters
- Microhmmeters
- Transformers Test
- Hipot High Voltage Testers
- Cable Fault Locators
- Circuit Breaker Analyzers
- Protection Relay Test Systems
- Battery Testers
- Solar Photovoltaic Analyzers
- Cable Network Test
- OTDR & Optical Fiber Test
- Optical Fiber Fusion Splicers
- Wireless Network Analyzers
- RF Powermeters
- TV & Satellite Analyzers
- Video Generators
- Broadcast & TV Distribution
- Antennas
- Signal Amplifiers
- Electromagnetic Field Testers
- Electrostatic Discharge Testers
- EMC & EMI Test
- Anechoic Chambers
- Multifunction Calibrators
- Temperature Calibrators
- Pressure Calibrators
- Electrical Energy Calibration
- LCR Calibration
- Infrared Thermal Cameras
- Environment Testers
- Sound & Vibration Testers
- Gas Analyzers
- Water Leak detectors
- Soldering Rework Stations Tools
- Precision Balances
- Topographic Measurements
- Biomedical Equipments
- Microscopes
- Spectrometers
- Video Inspection Borescopes
- Ultrasound Inspection Systems
- Technical Training Systems
Recommended products
ESD Electrostatic Discharge Simulator NoiseKen ESS-2000AX
RF Emission Radiation Precision Scanner NoiseKen EPS-3007
Pulse 1, 2a Generator Automotive Transient Surge Simulator NoiseKen ISS-7610
Pulse 3a, 3b Generator Automotive Transient Surge Simulator NoiseKen ISS-7630
Pulse 2b, 4 Generator Automotive Transient Surge Simulator NoiseKen BP4610
Pulse 5a, 5b Generator Automotive Transient Surge Simulator NoiseKen ISS-7650
High Voltage Lighting Surge Simulator NoiseKen LSS-F02
Code: NoiseKen LSS-F02
Product Datasheet (*.PDF - 3.2 Mb)Surges represent transients that might be induced in cables by lightning. By their nature, fairly high energy charges may easily damage or upset unprotected electronics circuits and components. Surges are not a new problem. Many companies have been testing their products at various stages of the products life: design tests, qualification tests, production tests and diagnostic tests.
The advance of surge suppression devices and technique does not lessen the importance of surge testing, but rather increases it, as the requirement to reduce power consumption and to increase the operational speed of semiconductors has become more demanding. In addition, the issue of surge testing is attracting renewed interest since this form of immunity is now a must for almost all electronic products for access to the global market.
-
"Output voltage 15kV, current 7500A" which can conduct breakdown resistibility test
-
"50% reduction of the output interval" which can drastically reduce the test time
-
"Touch-panel" adopted for the easy test setting
-
"Multi-languages" for the easy operation processing available
-
"Indicator" which is linked with the test setting equipped
-
PC control available with the optional software
-
"Emergency stop" & "Interlock terminal" which secure the test operator equipped
-
"Output waveform monitor terminal" which can ease pre-checking of the waveforms prior to the actual test
SPECIFICATIONS
Surge Generating Unit
|
Parameter |
Specifications |
Remarks |
|
1.2/50μs-8/20μs Combination waveforms |
Output voltage 0.5kV to 15kV ±10% Front time 1.2μs ±30% Duration 50μs ±20% Output current 250A to 7500A ±10% Font time 8μs ±20% Duration 20μs ±20% |
Common for the all models Voltage step : 0.1kV step The setting can be from 0kV |
|
10/700μs-5/320μs Combination waveforms |
Output voltage 0.5kV to 15kV ±10% Front time 10μs ±30% Duration 700μs ±20% Output current 12.5A to 375A ±10% Front time 5μs ±20% Duration 320μs ±20% |
Models: C1/C3 Voltage step : 0.1kV step The setting can be from 0kV |
|
Output polarity |
Positive / Negative |
|
|
Interval |
10 sec. to 989 sec., depending on the set voltage 10 sec. (<6kV) |
15 sec. and over in 10/700 μs waveform |
|
Output impedance |
1.2/50μs waveform : 2Ω ±10% 10/700μs waveform : 40Ω ±10% |
|
AC/DC CDN
|
Parameter |
Specifications |
Remarks |
|
Coupling surge waveform |
1.2/50μs-8/20μs combination waveforms |
|
|
Max. coupling surge voltage / current |
Up to the values which can be set |
|
|
Coupling network Correspondent to IEC61000-4-5 |
18μF: Between LINE - LINE (10Ω +9μF selectable) |
|
|
10Ω: ±9μF Between LINE - PE (18μF selectable) |
| |
|
Injection mode |
Between LINE - LINE, Between LINE - PE |
|
|
Power supply lines structure for EUT |
Single phase AC: L/N/PE DC : +/-/PE |
Models : A1 / C1 |
|
3-phase AC : L1/L2/L3/N/PE (Common for single phase and 3-phase) DC : +/-/PE |
Models : A3 / C3 | |
|
EUT power capacity |
AC240V/20A MAX. 50/60Hz, DC125V/20A MAX |
Models : A1 / C1 |
|
AC500V/50A MAX. 50/60Hz. DC125V/50A MAX |
Models : A3 / C3 | |
|
Decoupling coil |
1.5mH |
|
|
Phase angle control |
0 to 360° ±10° |
|
CDN for Telecom lines (Only in models C1 and C3)
|
Parameter |
Specifications |
Remarks | |
|
Coupling surge waveform |
1.2/50μs-8/20μs combination waveforms |
| |
|
Max. coupling surge voltage / current |
Up to the values which can be set |
| |
|
Impedance matching resistors |
40Ω |
80Ω per 1 line at 2 lines 160Ω per 1 line at 4 lines |
1.2/50 μs waveform |
|
25Ω |
0Ω per 1 line at 2 lines 100Ω per 1 line at 4 lines |
10/700 μs waveform | |
|
Coupling mode |
Common mode / |
| |
|
Coupling network |
Gas arrestor : 90V |
| |
|
Line for EUT |
2 lines / 4 lines DC50V/100mA MAX |
Selectable | |
|
Decoupling coil |
20mH |
| |
Others
|
Parameter |
Specifications |
Remarks |
|
Voltage monitor |
BNC output, 1/2000±10% |
In open-circuit for SURGE OUT |
|
Current monitor |
BNC output, 1mV/A±10% |
In short-circuit for SURGE OUT |
|
External communication |
RS-232C optical communication |
|
|
Power supply |
AC100V to AC240V ±10%, 50Hz / 60Hz |
|
|
Dimensions |
W555×H1800×D790 mm |
Projection excluded |
|
Mass |
Approx. 300kg |
Models: A1 / A3 |
|
Approx. 340kg |
Models: C1 / C3 |
SELECTION GUIDE TABLE
|
Model LSS-F02 |
Output waveform |
AC/DC Power Line CDN |
Telecom Line CDN | ||
|
1.2/50 μs (8/20 μs) |
10/700 μs (5/320 μs) |
Single phase AC240V/30A, DC60V/20A |
Single and 3-phase AC600V/50A, DC60V/20A |
DC50 V 100mA | |
|
A1A |
Available |
|
Available |
|
|
|
A3A |
Available |
|
|
Available |
|
|
C1A |
Available |
Available |
Available |
|
Available |
|
C3A |
Available |
Available |
|
Available |
Available |
STANDARD ACCESSORIES
|
Items |
Specifications/FUnctions |
Quantity |
Correspondent models |
|
Surge output cable |
HOT/COM |
2 pcs. |
A1/A3/C1/C3 |
|
Output cable to power supply lines |
For single phase : L / N / PE |
3 pcs. |
A1/C1 |
|
For 3-phase : L1 / L2 / L3 / N / PE |
5 pcs. |
A3/C3 | |
|
Output cable to telecom lines |
For 1 to 4 lines and GND |
5 pcs. |
C1/C3 |
|
Arrestor unit |
For coupling : Equipped to main unit panel |
4 pcs. |
C1/C3 |
|
For input protection : Equipped to main unit panel |
4 pcs. | ||
|
Cable for monitor |
BNC-BNC cable |
1 pc. |
A1/A3/C1/C3 |
|
External interlock connector |
5P plug (Short between #1 - #3) |
1 pc. |
A1/A3/C1/C3 |
|
Power supply cable |
For AC100V, 3P equipped with G connector cable |
1 pc. |
A1/A3/C1/C3 |
|
High voltage connector cap |
Equipped to main unit panel |
5 pcs. |
A1/C1 |
|
7 pcs. |
A3/C3 | ||
|
FG cable |
For grounding the body |
1 pc |
A1/A3/C1/C3 |
|
Instruction manual |
In Japanese/ English |
1 each |
A1/A3/C1/C3 |
Copyright © 2010 - 2024 / Distek