Test voltage: 50V, 100V, 250V, 500V, 1000V
Two measurements at once and a dual display
PEFC/PSC and loop impedance are measured and displayed in parallel, saves you more than 50% of test time compared to other loop testers.
Additional new high current loop mode
Faster measurements compared to loop tests with non-trip mode for RCD’s
Unique zero adapter for fast, always reliable and accurate test lead and mains cord compensation
Earth resistance
Fast voltage measurement between L-N, L-PE and N-PE using the mains cord. No need to change measurement connections
Earth Volt Touchpad detects raised earth voltages >50 V, indicating potential dangerous situations
Supplied with the SureGrip™ test leads and clips which gives the user a comfortable, reliable grip
Rotary dial knob indicates clear which function is selected, all functionalities on one spot and no complex multi level menus
Large display with backlight, clear symbols and exceptionally wide viewing angle for easy and safe readings
PASS/FAIL indication for RCD test results
Variable RCD current mode for customized settings
Extended Memory
Rugged & lightweight Withstands a drop of 1 meter

Standard accessories

6 AA Cell batteries
C1600 Hard carrying case
Zero Adapter
Mains test cord
TL165X/STD Standard Test Lead Set
Padded carrying strap
Quick reference guide
TP165X Remote control probe and lead
Users manual on CD-ROM

Recommended options

ES165X Earth Spike Test Kit (Fluke 1653)
TP165X Remote Control Probe
DMS DMS Software
FlukeView Forms FlukeView Forms Software with cable

More products FLUKE

DOCUMENTING PROCESS CALIBRATOR-HART FLUKE 753

• Measure volts, mA, RTDs, thermocouples, frequency
• ohms to test sensors, transmitters and other instruments
• Source/simulate volts, mA, thermocouples, RTDs, frequency, ohms, and pressure
• Power transmitters during test using loop supply with simultaneous mA measurement
• HART Capabilities

CURRENT CLAMP METER TRUE-RMS AC/DC FLUKE 376

• iFlex fexible current probe included, 18-inch circumference
• 2500 A AC current measurement with iFlex
• 1000 A AC current measurement with fxed jaw
• 1000 V AC and DC voltage measurement
• True-rms AC voltage and current
• Frequency measurement to 500 Hz
• 60-k O resistance measurement
• 500 mV DC measurement range
• 1000 µF capacitance measurement

CARBON MONOXIDE TESTER FLUKE CO-220

• Rugged case and electronics.
• Large LCD displays CO levels from 0 to 1000 ppm.
• Bright back-light allows easy screen viewing under dim lighting conditions.
• Beeper triggers with increasing frequency as CO levels rise.
• MAX Hold function stores and displays the maximum CO level.
• Automatic sensor zeroing and self-test sequence upon start-up.

FLUKE 438 II MOTOR AND ENERGY QUALITY ANALYZER

• Measure key parameters on direct-on-line motors including torque, RPM, mechanical power and motor efficiency
• Perform dynamic motor analysis by plotting of motor derating factor against load according to NEMA/IEC guidelines
• Calculate mechanical power and efficiency without the need of mechanical sensors, just connect to the input conductors and you're ready to go
• Measure electrical power parameters such as voltage, current, power, apparent power, power factor, harmonic distortion and unbalance to identify characteristics that impact motor efficiency

WIRELESS MEASUREMENT SYSTEM FLUKE CNX 3000 SERIES

• Fluke CNX 3000 Wireless Multimeter
• Fluke CNX v3000 AC Wireless Voltage Module
• Fluke CNX i3000 iFlex AC Wireless Current Module
• Fluke CNX a3000 AC Wireless Current Clamp Module
• Fluke CNX t3000 K-Type Wireless Temperature Module

FLUKE 116 HANDHELD DIGITAL MULTIMETER HVAC 3.5 DIGIT

• 3.5 digit
• 6000 count
• 0.5% accuracy
• Built-in thermometer for HVAC applications
• Microamps to test flame sensors

MULTI-PRODUCT CALIBRATOR FLUKE 5500E

• Handheld digital multimeters
• Bench multimeters (up to 4½ digits)
• Clamp meters
• Electronic thermometers
• Oscilloscope recorders

FLUKE 721 PRESSURE CALIBRATOR

• 16 PSI (1.1 bar) or 36 psi (2.48 bar) low pressure sensor
• 7 high pressure ranges including 100, 300, 500, 1000, 1500, 3000 or 5000 psi (6.9, 20, 24.5, 69, 103.4, 200, 345 bar)
• Ideal for gas flow calibration (custody transfer) applications
• Two isolated, stainless steel, pressure sensors with 0.025 % accuracy
• Pt100 RTD input for temperature measurement, (probe optional)
• Measures 4 to 20 mA signals
• Internal 24 V loop power supply can power a transmitter under test
• Measure up to 30 V dc, check 24 V loop power supplies

FLUKE ESA715 ELECTRICAL SAFETY ANALYZER

• 5” Touchscreen with intuitive user interface
• Small, portable, ergonomic design with an integrated handle
• OneQA-enabled workflow automation eliminates need for laptop
• Wireless capability allows you to run test procedures in the field and automatically sync results

CURRENT CLAMP METER TRUE-RMS AC/DC FLUKE 374

• iFlex fexible current probe compatible
• 600 A AC and DC current measurement with fxed jaw
• 2500 A AC current measurement with iFlex (sold separately)
• 600 V AC and DC voltage measurement
• True-rms AC voltage and current
• 6000 O resistance measurement
• 1000 µF capacitance measurement