4.5 digit high resolution mode for precise measurements
20,000 count
0.1% dc accuracy
Built-in thermometer conveniently allows you to take temperature readings without having to carry a separate instrument
Conductance for coil testing
Magnetic hanger (included with kit) for easy set-up and viewing while freeing your hands for other tasks
Peak min/max to capture intermittent events as short as 250 microseconds
Large digit display with bright, two-level backlight
Measure up to 1000 V ac and dc
Current measurements up to 10 A, 20 A for up to 30 seconds
Built-in thermometer lets you carry one less tool (temperature probe included)
Diode test for alternator testing
Frequency to 200 kHz and % duty cycle
Resistance, continuity
RPM measurements with inductive pickup (included)
Millisecond pulse width measurements for fuel injectors
Magnetic hanger to attach meter to the vehicle and free your hands for other tasks
Min/Max-Average recording with Min/Max Alert to capture variations automatically
Peak capture to record transients as fast as 250 µs
Relative mode to remove test lead resistance from low ohms measurements
Auto and manual ranging for maximum flexibility
AutoHOLD to capture stable readings avoiding noisy signals
Large display digits and two-level bright white backlight for increased visibility
Analog bargraph to track changing or unstable signals
Input Alert provides audible warning against wrong use of input jacks
Improved sleep mode draws less current for longer battery life
Access door for fast battery changes without opening up the case
"Classic" design with new removable holster with built in test lead and probe storage
10 mega-ohm input impedance won't load circuits, and is safe for computers
Lifetime warranty

Standard accessories

Combo Kit Includes:

88V Automotive Multimeter
TL224 1.5 m long heat resistant silicone test leads
TP220 removeable test probes to correctly measure corroded terminals
AC285 Alligator Clips
TPAK Magnetic Hanger to position and hold meter to steel surfaces
80BK Temperature Probe
RPM80 Inductive Pick-Up Probe
Two Automotive Back Probe Pins
Insulation Piercing Probe
C800 Durable Carrying Case

More products FLUKE

TRUE-RMS CURRENT CLAMP METER 400 A FLUKE 325

• 400 A ac and dc current measurement
• 600 V ac and dc voltage measurement
• True-rms ac voltage and current for accurate measurements on non-linear signals
• Resistance measurement up to 40 k? with continuity detection
• Temperature and capacitance measurement
• Frequency measurement

AIR QUALITY PARTICLE COUNTER FLUKE 985

• Six channels and particle size range of 0.3 - 10.0 µm
• Ultra-lightweight and ergonomic design
• Large 3.5 QVGC Color display
• 10,000 record storage
• USB/Ethernet charge cradle

FLUKE 289 HANDHELD DIGITAL DATA LOGGING MULTIMETER 4.5 DIGIT

• 50,000 count
• 0.025% basic accuracy
• Logging function with TrendCapture
• Low input impedance function (LoZ)
• Motor winding and low ohm measurement range
• Low pass filter

FLUKE 190-502 190-502/S HANDHELD DIGITAL OSCILLOSCOPE 2X500 MHZ

• 2-channels isolated 500MHz
• CAT III 1000V / CAT IV 600V safety rated
• Dedicated 5000 Count digital multimeter in two-channel models
• Advanced automatic measurements, power (Vpwm, VA, W, PF) and time (mAs, V/s, w/s)
• IP-51 rated for dust and drip proof to withstand harsh environments
• Isolated USB ports for memory devices and PC connectivity

FLUKE 438 II MOTOR AND ENERGY QUALITY ANALYZER

• Measure key parameters on direct-on-line motors including torque, RPM, mechanical power and motor efficiency
• Perform dynamic motor analysis by plotting of motor derating factor against load according to NEMA/IEC guidelines
• Calculate mechanical power and efficiency without the need of mechanical sensors, just connect to the input conductors and you're ready to go
• Measure electrical power parameters such as voltage, current, power, apparent power, power factor, harmonic distortion and unbalance to identify characteristics that impact motor efficiency

MULTIFUNCTION PROCESS CALIBRATOR FLUKE 726

• 0 to 100 mV, 0 to 30 V DC Voltage measure
• 0 to 100mV, 0 to 20 V DC Voltage source / simulate
• 0 to 24 mA Current measure / source / simulate
• 0 to 4000 O Resistance measure / source / simulate
• 1 to 15 kHz Frequency measure / source / simulate
• RTDs, thermocouples measure / source / simulate
• pressure measure

PHASE ROTATION INDICATOR FLUKE 9040

• 3 phase indication
• Indication of phase rotation
• Clear LCD display
• No battery required

FLUKE 279 FC TRMS DIGITAL THERMAL MULTIMETER WITH TERMOVISION

• Full-featured multimeter with built-in thermal imager
• 15 measurement functions including: AC voltage with low-pass filter, DC voltage, Resistance, Continuity, Capacitance, Diode test, Min/Max/Avg, AC current (with iFlex), Frequency
• Image resolution-80 x 60
• 3.5 in /8.89 cm color LCD screen
• CAT III 1000 V, CAT IV 600 V measurement category

FLUKE 712B RTD TEMPERATURE CALIBRATOR

• measure and simulate (13) different RTD types and resistance
• Measure 4 to 20 mA signals while simultaneously sourcing a temperature signal
• Configurable 0 % and 100 % source settings for quick 25 % linearity checks
• Linear ramp and 25 % step auto ramp based on 0 % and 100 % settings
• Dual inputs and backlit display for easy interpretation of measurements
• Power down settings remembered at power up for easy restart of tests
• 1-year and 2-year specifications and traceable certification of calibration

FLUKE 287 HANDHELD DIGITAL DATA LOGGING MULTIMETER 4.5 DIGIT

• 4.5 digit large ¼ VGA display with white backlight
• 50,000 count
• 0.025% basic accuracy
• Logging function with TrendCapture