Record power and associated parameters for up to 45 days
Monitor maximum power demand over user-defined averaging periods
Prove the benefit of efficiency improvements with energy consumption tests
Measure harmonic distortion caused by electronic loads
Improve reliability by capturing voltage dips and swells from load switching
Easily confirm instrument setup with color display of waveforms and trends
Measure all three phases and neutral with included 4 flexible current probes
View graphs and generate reports with included Power Log software
Compact, rugged design with IP65 case, 600 V CAT III and two-year warranty
Load studies - verify electrical system capacity before adding loads
Energy assessments - quantify energy consumption before and after improvements to justify energy saving devices
Harmonics measurements - uncover harmonic issues that can damage or disrupt critical equipment
Voltage event capture - monitor for dips and swells that cause spurious resets or nuisance circuit breaker tripping

Standard accessories

soft carrying case
4 flexible current probes (15 A/150 A/3000 A)
Power Log software
Voltage leads and clips
Color localization set
PC interface cable
International ac adapter (115/230 V, 50/60 Hz)
Printed English manual
Multi-language manual CD

Recommended options

VL1735/45	Voltage Lead Set
I1A/10A Clamp PQ3	Clamp PQ3 3-Phase 1A/10A
I1A/10A Clamp PQ4	I1A/10A Clamp PQ4
I20A/200A Clamp PQ3	I20A/200A PQ3 3-Phase Clamp
I20A/200A Clamp PQ4	I20A/200A PQ4 Clamp
I5A/50A Clamp PQ3	I5A/50A Clamp PQ3 3-Phase 5A/50A
I5A/50A Clamp PQ4	Clamp PQ4 5A/50A

More products FLUKE

WIRELESS AC FLEXIBLE CURRENT CLAMPMETER FLUKE CNX I3000 IFLEX

• True-RMS AC current measurements to 2500 A
• 3% accuracy
• Memory recording up to 65,000 readings
• iFlex current probe allows you to get into tight, awkward spaces
• Backlit LCD display
• CAT IV 600 V, CAT III 1000 V

FLUKE VT02 INFRARED THERMOMETER WITH INTEGRATED CAMERA

• take simultaneous visual images with the thermal heat map images that are accurately aligned close in
• Temperature measurement range -10 °C to +250 °C (14 °F to 482 °F)
• Infrared spectral band 6.5 µm to 14 µm
• Minimum focus distance 50 cm (19.6 in)
• Field of View 20° X 20°
• 4 GB Micro SD card

INDUSTRIAL VOLTAGE AND CURRENT MEASUREMENT SYSTEM FLUKE CNX 3000 IND

• True-RMS AC and DC voltage measurements to 1000V
• True-RMS AC and DC current with 0.01 mA resolution
• True-RMS AC current measurements to 2500 A
• True-RMS AC voltage measurements to 1000V
• CAT III 1000 V, CAT IV 600 V, CAT III 1000 V; IP42

FLUKE 1625-2 GEO EARTH GROUND RESISTANCE TESTER

• 3- and 4-pole Fall-of-Potential, earth resistance loop testing
• 4-pole Soil Resistivity testing
• Selective earth ground rod testing using 1 clamp
• Stakeless earth ground rod testing using 2 clamps
• IP56 rated for outdoor use
• USB data storage and transfer
• Automatic Frequency Control (AFC)
• R* measurement - calculates earth ground impedance at 55 Hz

AC VOLTAGE DATA ACQUISITION RECORDING KIT FLUKE FLK-CNX V3000 KIT

• True-RMS AC and DC voltage measurements to 1000V
• True-RMS AC and DC current with 0.01 mA resolution
• True-RMS AC voltage measurements to 1000V
• Memory recording up to 65,000 readings
• CAT III 1000 V; CAT IV 600 V; IP42

LOOP CURRENT PRECISION CALIBRATOR FLUKE 709

• Functions: mA source, mA simulate, mA read, mA read/loop power and volts read
• Best-in-class accuracy at 0.01% reading
• Small rugged design operates on (6) standard AAA batteries
• Intuitive user interface with Quick-Set knob for fast setup, easy use
• Built in selectable 250 ? resistor for HART communication

HANDHELD VOLT/MA CALIBRATOR FLUKE 715

• 0 to 200 mV, 0 to 20 V Voltage measure
• 0 to 100mV, 0 to 10 V Voltage source / simulate
• 0 to 24 mA Current measure
• 0 to 20 mA Current source / simulate
• very high accuracy of 0.015% and 1 mA resolution

PRECISION INFRARED THERMOMETER FLUKE 574

• Backlit display for poorly lit areas
• Last ten temperature readings displayed on bar graph for easy reference
• Enhanced optics (distance to spot ratio up to 60:1) allow measurements of smaller objects from farther away
• Coaxial three-dot laser sighting system highlights the true diameter of measurement spots at all distances (90% energy)
• MIN/MAX measurements calculations instantly computed
• Audible and visible HI temperature alarm for instant recognition
• 100 temperature data logging capability for easy route review

DOCUMENTING PROCESS CALIBRATOR FLUKE 753

• Measure volts, mA, RTDs, thermocouples, frequency
• ohms to test sensors, transmitters and other instruments
• Source/simulate volts, mA, thermocouples, RTDs, frequency, ohms, and pressure
• Power transmitters during test using loop supply with simultaneous mA measurement

FLUKE 700PTPK PNEUMATIC TEST KIT FOR PRESSURE CALIBRATION

• Combine with any Fluke-700G Series Gauge, 1,000 psi (69 bar) or less, to make a complete pressure testing kit
• Generate pressure up to 600 psi, 40 bar with the 700PTP-1 test pump
• Connect the 700G Series gauge directly to the included PTP-1 hand pump
• Includes hoses and adapters for connecting to the pressure device to be tested
• Hard case protects pump and gauge and allows gauge to remain connected to the pump