The MN35 is a convenient mini size multimeter with protective rubber holster and tilt stand. Manual ranging, measures AC and DC Voltage to 600V, Resistance with Continuity and Diode functions, DC Current to 10A, Temperature, and 9V/1.5V Battery test. Includes protective rubber holster, 9V battery, test leads and Type K thermocouple probe.

Features:

Large easy to read digital display
AC/DC Voltage, DC Current, Resistance, Type K Temperature, Continuity/Diode
1.5V and 9V Battery test function
Convenient mini size with protective rubber holster and tilt stand
Data Hold locks reading in the display
Includes protective rubber holster, 9V battery, bead wire Type K temp. probe and test leads

More products EXTECH

EXTECH HD780 DIGITAL MANIFOLD/PRESSURE GAUGE

• Dual differential inputs for pressure and temperature
• Displays 5 types of pressure units
• For use with R22 and R410A refrigerants
• Standard 1/4 NPT male flare fittings

EXTECH 382260 80W SWITCHING MODE DC POWER SUPPLY

• Performs like 3 power supplies in one
• 3 selectable ranges: 0 to 16V/0 to 5A; 0 to 27V/0 to 3A; 0 to 36V/0 to 2.2A
• 4-Digit LED displays
• Front/Rear output terminals

EXTECH TG20 WIRE TRACER KIT

• Transmitter with output cables terminated in modular RJ11 phone connector
• Transmitter injects traceable signal into cables, checks telephone lines, and performs continuity checks
• Non-Contact probe audibly identifies selected wire or cable
• Easily trace wires from source to termination
• Test for properly operating phone lines

EXTECH MN30 TRUE RMS AUTOSENSING™ MULTIMETER + NCV

• True RMS for accurate readings of noisy, distorted or non-sinusoidal waveforms
• Unique smart AutoSensing feature
• Built-in Non-Contact Voltage (NCV) detector
• Convenient built-in LED Flashlight
• Audible Continuity tester

EXTECH MA140 TRUE RMS 300A AC CLAMP METER

• True RMS for accurate readings of noisy, distorted or non-sinusoidal waveforms
• Compact 0.8" (22mm) jaw size accommodates conductors up to 300MCM and allows measurements in tight locations
• Unique Smart Auto Sense feature
• Low Pass Filter (LPF) for accurate measurement of variable frequency drive signals
• Built-in Non-Contact Voltage (NCV) detector for quick detection of live voltage
• Inrush current measurement

EXTECH MN26T MINITEC™ AUTORANGING DIGITAL MULTIMETER

• Large 2000 count LCD display
• AC/DC Voltage & Current, Resistance, Capacitance, Frequency, Temperature, Duty Cycle, Diode/Continuity
• Relative zero, Data Hold, Range Hold and Auto power off
• 10A fuse protection
• Overload protection and indication
• Includes protective holster with stand, general purpose Type K bead wire temperature probe, 2 AAA batteries and test leads

EXTECH EN100 11-IN-1 ENVIRONMENTAL METER

• Built-in sensors measure Air Velocity, Air Flow, Temperature, Humidity, Wet Bulb, Dew Point, Heat Index, Wind Chill, Barometric Pressure, Altitude, and Light
• Field replaceable low friction vane wheel improves air velocity accuracy
• Backlit LCD display (auto off after 5 seconds)
• Data Hold, Auto Power Off, Auto-rotating display depending on function
• Complete with built-in multiparameter sensors, wrist strap, and CR2032 battery

EXTECH PRC10: CURRENT CALIBRATOR/METER

• 0 to 24mA (-25 to 125%) readout
• 24V DC power source for 2-wire current loop
• Up to five user adjustable calibration presets
• Palm-sized double molded housing and large dot-matrix digital backlit LCD
• Standard banana I/O ports
• Large battery bank for extended work cycle

EXTECH 380820 UNIVERSAL AC POWER SOURCE & AC POWER ANALYZER

• 99 memory locations for preset voltage and frequency output settings
• User-programmable Over Current Protection
• Programmable through the built-in RS-232 interface
• Data acquisition mode captures readings to your PC with a user-programmable sampling rate of 2 to 65,535 seconds
• Complete with AC power cord, RS-232 to USB cable and software

EXTECH DL160 DUAL INPUT TRUE RMS AC VOLTAGE/CURRENT DATALOGGER

• Simultaneously measure two AC Voltage inputs or two AC Current inputs or one AC Voltage and one AC Current input
• Readings can be downloaded to your PC via the USB interface and analyzed using the included software or exported to a spreadsheet
• LCD indicates time/date, current readings and Min/Max
• Auto Power off and battery check