Extech HT200 Heat Stress WBGT (Wet Bulb Globe Temperature) Meter

• Large LCD display with advanced illuminance functions and features
• Wide measurement range to 99,990Fc (999,900 Lux) with resolution of 0.001Fc and 0.01Lux
• Luminous intensity (candela) calculations
• Store and recall up to 50 measurements, includes relative or real time clock stamp
• Ripple function excludes the effect of stray light from the primary light source measurement
• Timed-Hold, Relative in absolute value or % deviation, and Comparator function with high low alarms

 

• Triple LCD simultaneously displays 3 pressure channels
• Up to 5000psi with 4-20mA output
• 4-20mA input with readout in 9 units of measure
• Datalogger date/time stamps and stores readings on an SD card in Excel® format

 

• Built-in sensors measure Air Velocity, Air Flow, Temperature, Humidity, Wet Bulb, Dew Point, Heat Index, Wind Chill, Barometric Pressure, Altitude, and Light
• Field replaceable low friction vane wheel improves air velocity accuracy
• Backlit LCD display (auto off after 5 seconds)
• Data Hold, Auto Power Off, Auto-rotating display depending on function
• Complete with built-in multiparameter sensors, wrist strap, and CR2032 battery

 

• Meter accurately determines the Heat Stress level by factoring a combination of humidity, temperature, air movement, and direct solar radiation
• Uses a capacitance sensor to accurately measure Wet Bulb Globe Temperature (WBGT), Black Globe Temperature (TG), Relative Humidity (%RH), Air Temperature (TA), Wet Bulb (WT) and Dew Point (DEW)
• Black Globe Temperature (TG) monitors the effects of direct solar radiation on an exposed surface
• In/Out function displays the WBGT value with or without direct sun exposure

 

• Four terminal Kelvin measurements
• Over-temperature and over-voltage protection
• 5 ranges with 100µOhm max resolution
• Invalid test indicators prevent inaccurate measurements
• Built-in water resistant case with shoulder strap

 

• One model for multiple thermocouple types with precision output displayed as mV or °C/°F
• Microprocessor assures maximum accuracy to 0.15% of reading over wide ranges
• High Accuracy Calibration function simulates precision thermocouple outputs for use in calibrating thermometers, transmitters,controllers or recorders.
• Complete with universal AC adaptor and AU/EU/UK/US plugs

 

• Durable construction
• Case may be grounded separately
• 3 binding posts permit isolated substitutions
• 1% Resistance substitution from 1 to 11,111,110O
• Seven decade ranges of resistance
• Values can be set in 1O increments

 

• Alternately displays Carbon Monoxide (CO) concentration, Air Temperature, and Relative Humidity readings (cycles approximately every 6 seconds)
• Visible bright tri-colored (green, yellow, red) LED alarm indicator
• Adjustable audible alarm for readings exceeding one of the selected ranges: 25ppm, 30ppm, 35ppm, 50ppm, 100ppm or 200ppm
• ZERO Re-Calibration function
• Manual Temperature and Relative Humidity Compensation (adjustable)
• CO Calibration function in fresh air

 

• Measure AC Current, AC/DC Voltage and Resistance
• 1.25" (33mm) circular jaw opening for large cables (350MCM)
• Large 2000 count LCD display
• Data Hold freezes data in display
• Peak Hold captures in-rush currents
• Audible Continuity beeper

 

• 250V, 500V, and 1000V test voltages
• Insulation Resistance to 2000MOhm
• Lo Ohm function for testing connections
• Lock Power On Function for hands-free operation