This type 2 sound level meter meets ANSI and IEC 651 Type 2 standards. Ideal for noise surveys in the workplace, installing fire alarms and speaker systems and enforcing noise ordinances. Measures from 35 to 130dB in 2-ranges with accuracy of plus or minus 1.5dB. Data hold and Max hold functions. Backlit display allows use in dimly lit areas. Complete with microphone wind screen and 9V battery.

Features:

High accuracy meets ANSI and IEC 651 Type 2 standards
High and Low measuring ranges: 35 to 100dB (low) and 65 to 130dB (high)
Data Hold and Max Hold functions
Backlit LCD display to view in dimly lit area

More products EXTECH

EXTECH TG20 WIRE TRACER KIT

• Transmitter with output cables terminated in modular RJ11 phone connector
• Transmitter injects traceable signal into cables, checks telephone lines, and performs continuity checks
• Non-Contact probe audibly identifies selected wire or cable
• Easily trace wires from source to termination
• Test for properly operating phone lines

EXTECH PQ3470 3-PHASE GRAPHICAL POWER & HARMONICS ANALYZER/DATALOGGER

• 3-phase Voltage or Current Unbalanced Ratio (VUR, AUR) and unbalanced factor
• Capture Transient events (including dip, swell, and outage) with programmable threshold (%)
• Log up to 30,000 reading on a removable SD memory card in Microsoft Excel® format
• Wide sampling rate range (2 seconds to 2 hours)
• Built-in Clock and Calendar

EXTECH 407730 DIGITAL SOUND LEVEL METER

• ±2dB accuracy with 0.1dB resolution
• A+C weighting
• AC analog output
• Record Max/Min values over time
• Utilizes 0.5"(12.7mm) electret condenser microphone

EXTECH MO25 MOISTURE PEN

• Easy-to-use one button operation
• Data Hold and Auto power off
• Battery level check on power-up
• Complete with protective cap, built-in pocket clip, and one AAA battery

INSPECTION VIDEO CAMERA BOREOSCOPE EXTECH BR50

• 17mm camera diameter and 2.4" Color TFT LCD Monitor
• Four LED lamps with five brightness levels illuminate the viewed object
• Glare-free close-up field of view with 480 x 234 pixel display
• Automatically detects NTSC and PAL cameras

EXTECH PRC10: CURRENT CALIBRATOR/METER

• 0 to 24mA (-25 to 125%) readout
• 24V DC power source for 2-wire current loop
• Up to five user adjustable calibration presets
• Palm-sized double molded housing and large dot-matrix digital backlit LCD
• Standard banana I/O ports
• Large battery bank for extended work cycle

EXTECH EX205T TRUERMS DIGITAL MULTIMETER

• True RMS for better accuracy when measuring distorted waveforms
• 2000 count large backlit dual LCD with easy-to read digits
• Low current capability with resolution to 0.1µA
• Input fuse protection
• Max Hold, Data Hold and Auto power off
• Complete with test leads and 9V battery

EXTECH PRT200 NON-CONTACT PHASE SEQUENCE TESTER

• 75 to 1000VAC input voltage with 45 to 65Hz frequency range
• LEDs indicate phase orientation (clockwise or counter-clockwise) and whether each phase is live
• Beeper sounds intermittently when correct phase is detected and continuously if phase is reversed
• Durable housing with back cover magnet for attachment to an AC distribution panel for easy measurement

EXTECH EN150 11-IN-1 ENVIRONMENTAL METER WITH UV

• Built-in sensors measure Air Velocity, Air Flow, Temperature, Humidity, Wet Bulb, Dew Point, Heat Index, Wind Chill, Barometric Pressure, Altitude, and UV Light
• Field replaceable low friction vane wheel improves air velocity accuracy
• Backlit LCD display (auto off after 5 seconds)
• Data Hold, Auto Power Off
• Complete with built-in multiparameter sensors, wrist strap, and CR2032 battery

EXTECH PQ3470-30 3000A POWER ANALYZER KIT: PQ3470 WITH PQ34-30

• Graphic Phase diagram with 3-Phase system parameters
• 3-phase Voltage or Current Unbalanced Ratio (VUR, AUR) and unbalanced factor
• Capture Transient events (including dip, swell, and outage) with programmable threshold (%)
• Log up to 30,000 reading on a removable SD memory card in Microsoft Excel® format
• Wide sampling rate range (2 seconds to 2 hours)