The LCR200 is a passive component LCR meter. Discover the tremendous value with a range of features that help this meter provide the precise measurements you need. See simultaneous 20,000/2,000 count display of the primary parameter on the high contrast backlit display. You can set Hi/Lo limits using absolute values or percentages. Open and Short Zero removes unwanted stray impedances from the measurement. Use the built-in test fixture or external test leads (included). The LCR200 has an Auto Power Off function that can also be disabled and a low battery indicator to alert you when to replace the batteries. Complete with test leads and 9V battery.

� Measures Inductance, Capacitance, and Resistance with secondary parameter Q (Quality), D (Dissipation), R (Resistance), P (Phase), ESR (Equivalent Series Resistance)

� Simultaneous 20,000/2,000 count backlit display of the primary parameter (L, C or R) with the secondary parameter

� Auto Select measurement function with 1kHz default test frequency

� Five test frequencies

� Set Hi/Lo limits using absolute values or percentage limits

� Relative mode function

� Parallel or Series equivalent circuit

� Auto power off, Low battery and overrange indicators

� Built-in test fixture or use external test leads

� Open and Short calibration removes unwanted stray impedances from the measurement

� Complete with test leads and 9V battery

More products EXTECH

EXTECH CB10: AC CIRCUIT BREAKER FINDER/RECEPTACLE TESTER

• Quickly locate 110V to 125VAC Circuit Breakers and Fuses
• Variable Sensitivity adjustment to pinpoint correct circuit breaker
• Bright Red and Green LEDs indicates if receptacle is correctly wired or six fault conditions
• Push button GFCI test
• Audible and visual circuit breaker indication

EXTECH MN47 12 FUNCTION COMPACT MULTIMETER + NCV

• Built-in Non-contact Voltage Detector (from 100 to 600VAC)
• AC/DC Voltage, AC/DC Current, Resistance, Capacitance, Frequency, Type-K Temperature, Duty Cycle, Continuity / Diode
• Autoranging with manual override
• 4000 count high-contrast LCD display

EXTECH EN100 11-IN-1 ENVIRONMENTAL METER

• Built-in sensors measure Air Velocity, Air Flow, Temperature, Humidity, Wet Bulb, Dew Point, Heat Index, Wind Chill, Barometric Pressure, Altitude, and Light
• Field replaceable low friction vane wheel improves air velocity accuracy
• Backlit LCD display (auto off after 5 seconds)
• Data Hold, Auto Power Off, Auto-rotating display depending on function
• Complete with built-in multiparameter sensors, wrist strap, and CR2032 battery

EXTECH 382270 QUAD OUTPUT DC POWER SUPPLY

• Two fully adjustable supplies combined with two auxiliary outputs
• Two 0 to 30V/0 to 5A outputs with selectable Constant Voltage and Constant Current modes
• Two auxiliary outputs with fixed current of 3 to 6.5V/3A and 8 to 15V/1A

EXTECH DC400 400A DC MINI CLAMP METER

• High Accuracy and Resolution
• One touch "Auto Zero"
• Large 4000 count LCD display
• Easy to use, single function meter

EXTECH USB200: USB POWER MONITOR

• Test the output voltage, current, capacity and stability to prolong the charging equipment’s life cycle
• Test the quality of charging cable
• 10 storage bank locations
• Lightweight, ergonomic design with USB-A connector
• Complete with internal battery and USB plug cover for storage

EXTECH HD450 DATALOGGING HEAVY DUTY LIGHT METER

• Automatically stores up to 16,000 readings or manually store/recall up to 99 readings
• Large backlit LCD display with 40-segment bar graph
• Wide range to 40,000Fc or 400,000 Lux
• Cosine and color corrected measurements
• Utilizes precision silicon photo diode and spectral response filter
• Peak mode (10mS) captures highest reading

EXTECH CT20 REMOTE & LOCAL CONTINUITY TESTER

• A bright flashing LED and loud pulsating beeper indicate local continuity
• Remote continuity with the use of the remote probe
• Flashing remote probe - two lead, bi-color (red/green) LED probe allows a single user to identify up to three wires or cables at a time
• Lightweight and pocketsized, clips on and hangs from the cable(s) under test without falling off
• Great for Electricians and Helpers, Cable TV and Audio System Installers, Alarm Technicians, Plumbers, HVAC Installers etc.

EXTECH MA150 200A MINI AC CLAMP METER + NCV DETECTOR

• 0.7" (18mm) jaw opening
• 2000 count backlit LCD display
• Non-contact AC Voltage detector (100 to 600VAC) via clamp tip
• Built-in white LED flashlight
• Continuity and Diode Test, Max Hold, Auto power off

EXTECH SDL900 AC/DC MAGNETIC METER/DATALOGGER

• Utilizes Hall effect sensor with ATC (Automatic Temperature Compensation)
• Adjustable data sampling rate: 1 to 3600 seconds
• Memory stores 99 readings manually
• Datalogging feature records readings with date and time stamp on an SD card (included) in Excel® format
• N pole/S pole indicator