Items

ESS-B3011 specs

ESS-L1611 specs

Polarity

Positive or Negative

Output voltage

0.2 to 30.0kV +/-5%

(30.5kV maximum)

0.2 to 10kV: 0.05kV step

10.0 to 30.5kV: 0.10kV step

0.2 to 16.0kV +/-5%

0.2 to 10kV: 0.05kV step

10.0 to 16.0kV: 0.10kV step

Repetition cycle

0.05 to 99.9s (+/- 10%) /Manual

0.05 to 10.0s: 0.05s step

10.0 to 99.9s: 0.10s step

No. of time of discharge

1 to 999 times /continuous

Discharge mode

Contact discharge/ Air discharge

Trigger mode

Gun trigger / Main unit trigger

Operation panel

Indicator: 5x7 dot matrix LED

Operation: Push-buttons (Partially lighting)

Radiation mode select switch

Extra / Normal switching function built-in

Discharge detection

Discharge detection function in air-discharge mode

Pre-checking function

Pre-checking function by under operation (Not the calibration but just checking)

High voltage output checking

CR & Gun head checking

CR constant and gun head recognizable (with an indicator to prevent the wrong combination)

IEC level switching function

Contact discharge mode: 2.0, 4.0, 6.0, 8.0 kV step

Air discharge mode: 2.0, 4.0, 8.0, 15.0 kV step

Warning lamp

Lights up while the HV circuitry is on.

Blinks while discharges are in progress.

Charging capacitor and resistance

150pF+/-10%, 330 ohm +/-10% (built into Discharge Gun GT-30R)

Main unit charging resistance

10M ohm

(53Mohm for combination with Discharge Gun GT-30R)

Power supply/ Power consumption

100 to 240V AC  50/60 Hz +/-10%  62VA

Included accessories

Instruction manual

Dimensions and weight

(W)270 X (H)263 X (D)200 mm (projection excluded)
Approx. 4.6 kg

Items

GT-30R specifications

Output voltage

30.5kV Max

Polarity

Positive or Negative

Repetition cycle

0.05s and over   Note) Guaranteed value is 0.1s and over  (330pF and under)

Discharge mode

Contact or Air

Charging resistor

Built-in CR unit

Charge/Discharge capacitor & Discharge resistor

Built-in CR unit

High voltage connector

Composite connector of high voltage and signal line (male)  （NoiseKen custom)

Operation switch

Discharge trigger

LED irradiator

White LED light built-in for irradiating EUT （Focusing point is the tip)

Included accessories

CR unit (150pf-330 ohm) 06-00073A

Conical discharge tip 12-00007A

Round discharge tip 12-00008A

Instruction manual  

Dimensions and weight

  (W) 83X  (H) 217 X  (D) 229 mm  (projection excluded)
Approx. 0.8kg (Cable and connector excluded)

Approx. 10.8kg (Cable included, connecter excluded)