Frequency Range: 9kHz - 1MHz
Design: Ferrite core, Active
Internal Amplifier: 25dB (optional 35dB), battery powered (3-4 hours) or continuosly powered via included power supply
Impedance: 50 Ohm
RF connector: SMA (female), optional N connector
Temperature range: - 20°C to +60°C
Dimensions: (L/W/D): 66 x 32 x 11 cm
Weight: 5000gr
Incl. watertight transport case
Weight case: 9kg
Dimensions case: 113 x 42 x 16cm
Warranty: 10 years

Highlights:

Perfect for magnetic field direction finding in combination with Spectrum Analyzers
High Gain, internal 25dB pre-amplifier
High Directionality
Patented Functionality
Compact Design
10 years warranty and manufactured in Germany

High Gain Magnetic Field Tracking Antenna Aaronia MagnoTRACKER LF-6

A lot of customers have problems detecting and pin pointing signals in the low frequency range from 9kHz to 1MHz. They want one antenna with high gain to cover the full frequency range. The antenna should also offer a high directivity to pin point the signal(s).
Till today such an antenna simply did not exist. Aaronia now offer world�s first patent pending magnetic antenna "MagnoTRACKER" combining all those features.

Based on a new patented production process Aaronia can produce this new cores with only 10% of the material and weight needed for similar working ferrites. A great advantage for the handling of the MagnoTRACKER antenna.

The Aaronia Magnotracker is usable for the full frequency range of 9kHz to 1MHz without any adjustment. Simply connect it via SMA cable to your Receiver, Spectrum Analyzer, Oscilloscope, Power Meter etc.

But the great advantage of the antenna is that you can also adjust it to ANY frequency within the full frequency range.

With the help of 4 adjustment switches (Range: x1; x10; x100; x1000) and a fine pitch adjustment switch (Range: 1-16) to get a much higher gain at that special frequency working some sort as a filter or spectrum analyzer.

This is a great feature to reduce unwanted signals and to focus on the signal of interest.

Finding bugs or disturbing signals was never that simply and efficient.

Made in Germany:

All Aaronia antennas are developed, individually produced and calibrated in Germany at the Aaronia factory. This guarantees highest standard so that Aaronia can offer every customer a full 10 years warranty for all Magnotracker antennas.

Examples for possible analysis and measurements within frequency range (9kHz - 1MHz):

Bug finding
LF Band
MF Band
Interference hunting
DSL
ADSL
VDSL
RFID
Amateur Radio
etc.

Standard accessories

Included in delivery

Aaronia MagnoTRACKER LF-6

Watertight transport case with foam insert

International power supply

More products AARONIA

AARONIA OMNILOG 70600 OMNI-DIRECTIONAL ISOTRPIC RADIAL ANTENNA 680MHZ..6GHZ

• Design: Omni-Directional (radial isotropic)
• Polarization: Linear
• Frequency range: 700MHz - 6GHz
• Impedance: 50 Ohms

EMI/ EMC SPECTRUM ANALYZING GAUSSMETER 1HZ..30MHZ AARONIA SPECTRAN NF5030

• Frequency range: 1Hz to 1MHz (30MHz)
• Magnetic field (Tesla): 1pT to 2mT (typ.) expandable up to a amount of Tesla with PBS1
• Magnetic field (Gauss): 10µG to 20G (typ.) (only with option 006)
• Only with Option 009, 24bit resolution: 10nG to 20G (typ.) (Gauss)
• Electric field: 0,1V/m to 20kV/m (typ.)
• Resolution (RBW): 0,3Hz to 1MHz (1-3-10 step)
• Units: V, V/m, T, G, A/m

ACTIVE EMC BROADBAND ANTENNA + PREAMPLIFIER 400MHZ..2.5GHZ AARONIA HYPERLOG 4025X

• Compatible with any Spectrum Analyzer brand
• Design: ACTIVE directional Logarithmic-periodic
• Frequency range: 400MHz to 2,5GHz
• Nominal impedance: 50 Ohm
• VSWR: <1:2 (typ.)
• Gain: 44dBi (typ.)

AARONIA MDF 50400X MAGNETIC FIELD TRACKING ANTENNA 500KHZ..400MHZ

• Compatible with any Spectrum Analyzer brand
• Design: Loop
• Frequency Range: 500kHz - 400MHz (1MHz - 40MHz with max. +/- 1,0dB deviation)
• Impedance: 50 Ohm
• RF connector: SMA (female)

SPECTRUM ANALYZER FOR RADIO-FREQUENCY 10MHZ..6GHZ AARONIA SPECTRAN HF6060

• RF frequency range: 10MHz to 6GHz
• DANL: -135dBm(1Hz)
• DANL with Preamp: -150dBm(1Hz)
• Max. power at RF input: +10dBm
• Lowest sample time: 10mS
• Resolution (RBW): 3kHz to 50MHz
• Units: dBm, dBµV, V/m, A/m, W/m²(dBµV/m, W/cm² etc. via PC software)
• Detectors: RMS, Min/Max
• Demodulator: AM, FM

ACTIVE BICONICAL EMC TEST BROADBAND ANTENNA 20MHZ..1GHZ AARONIA BICOLOG 20100EX

• Compatible with any Spectrum Analyzer brand
• Design: Biconical (radial isotropic)
• Frequency range: 20MHz to 1GHz
• Max. output power: 100mW AM
• Nominal impedance: 50 Ohm
• Gain: 2dBi to 41dBi

EMC TESTING HYBRID BICONIC-LOGPERIODICAL ANTENNA 20MHZ..6GHZ AARONIA HYPERLOG 20600

• Compatible with any Spectrum Analyzer brand
• Design: Biconical & Logarithmic-Periodic (combination)
• Frequency range: 20MHz to 6GHz
• Max. input power: 310W AM
• Immunity test field strength:10V/mm
• Nominal impedance: 50 Ohm
• Accuracy: 0,3dB
• VSWR: <2:1 (typ.)
• Gain: 6dBi (typ.)

RF SPECTRUM ANALYZER 10MHZ..8GHZ AARONIA SPECTRAN HF6080

• Frequency range: 10MHz to 8GHz
• DANL: -145dBm(1Hz)
• DANL with Preamp: -160dBm(1Hz)
• Max. power at RF input: +10dBm
• Lowest sample time: 10mS
• Resolution (RBW): 1kHz to 50MHz
• Units: dBm, dBµV, V/m, A/m, W/m²(dBµV/m, W/cm² etc. via PC software)
• Detectors: RMS, Min/Max
• Demodulator: AM, FM, PM

MAGNETIC & ELECTRIC FIELD ANALYZER FOR LOW FREQUENCY 10HZ..10KHZ AARONIA SPECTRAN NF1010E

• Frequency range: 10Hz to 10kHz
• Magnetic field (Tesla): 1pT to 100µT (typ.)
• Magnetic field (Gauss): 100µG to 1G (typ.)
• Electric field: 1V/m to 2.000V/m (typ.)
• Resolution (RBW): 1Hz to 3kHz (1-3-10 step)
• Units: V/m, T, G, A/m
• Interface: USB 2.0/1.1

AARONIA POWERLOG 40400 MICROWAVE HORN ANTENNA 4GHZ..40GHZ

• Compatible with any Spectrum Analyzer brand
• Design: Horn antenna
• Frequency range: 4GHz - 40GHz (usable & directional from 700MHz up, specific calibration data from 18GHz up)
• Max. input power: 300W (peak)
• Nominal impedance: 50 Ohm
• Gain: up to 17dBi