Active directional broadband antenna 400MHz..6GHz Aaronia HyperLOG 4060

• Spectran HF-80160 V5 (9kHz - 16GHz) Real-Time Handheld Spectrum Analyzer
• Frequency range: 9kHz to 16GHz
• Up to 175MHz Real-Time bandwidth
• POI below 1µS
• Real-time I/Q streaming via USB
• Very fast sweep mode, scans 20GHz in less than 20mS (in preparation)

 

• Frequency range: 50 MHz to 700 MHz
• Up to 3V/m output power (0,5m distance)
• Perfect for RF immunity measurements
• Perfect for RF attenuation measurements
• Highest power level: +17dBm
• Smallest power level: -48dBm

• Compatible with any Spectrum Analyzer brand
• Design: Biconical & Logarithmic-Periodic (combination)
• Frequency range: 20MHz to 6GHz
• Max. input power: 310W AM
• Immunity test field strength:10V/mm
• Nominal impedance: 50 Ohm
• Accuracy: 0,3dB
• VSWR: <2:1 (typ.)
• Gain: 6dBi (typ.)

 

• Compatible with any Spectrum Analyzer brand
• Design: Active Logarithmic-Periodic
• Frequency range: 380MHz - 10GHz
• Nominal impedance: 50 Ohm
• VSWR (typ.): <1:2,5
• Gain (typ.): 45dBi

 

• Compatible with any Spectrum Analyzer brand
• Design: Loop
• Frequency Range: 500kHz - 60MHz (1MHz - 40MHz with max. +/- 0,3dB deviation)
• Max. input level: 5W (usable as transmitting antenna)
• Conversion factor: 1 (0 dB A/m is 0dBm)
• Impedance: 50 Ohm
• RF connector: SMA (female)

 

• Frequency range: 23.5MHz to 6GHz
• Incl. intuitive PC control software via USB Port
• Battery powered or via Power Supply
• Extremely compact and portable
• High output power up to +18dBm

 

• Worlds first 9kHz to 6GHz Handheld Isotropic Antenna
• Suitable for any Spectrum Analyzer
• High Gain and Low Noise
• Built-in Bypass Preamplifier
• Manual or Automatic Axis Switch
• Battery or DC Powered
• Incl. Control Software

 

• Near Field Probes compatible with any Spectrum Analyzer or Measurement Receiver
• Design: Active E & H near field probes
• Frequency range: DC (1Hz) to 6GHz
• Nominal impedance: 50 Ohm
• Preamplifier: UBBV2 (40dB, DC to 8GHz)
• Gain: Diff. Depending on probe (see data sheets)

 

• RF frequency range: 10MHz to 6GHz
• DANL: -135dBm(1Hz)
• DANL with Preamp: -150dBm(1Hz)
• Max. power at RF input: +10dBm
• Lowest sample time: 10mS
• Resolution (RBW): 3kHz to 50MHz
• Units: dBm, dBµV, V/m, A/m, W/m²(dBµV/m, W/cm² etc. via PC software)
• Detectors: RMS, Min/Max
• Demodulator: AM, FM

 

• Compatible with any Spectrum Analyzer brand
• Design: Biconical (radial isotropic)
• Frequency range: 20MHz to 3GHz
• Max. input power: 5W AM (100MHz)
• Nominal impedance: 50 Ohm
• Gain: -18dBi (@100MHz)