Generator de impulsuri 0.1Hz-10MHz TTi TGP110

• 0.03Hz to 3MHz frequency range
• External seven digit 120MHz counter
• Precision internal lin/log sweep
• Internal/external AM up to 100%
• Simultaneous display of frequency & amplitude
• High waveform quality at all frequencies & levels
• 2mV to 20V pk-pk from 50 Ohms or 600 Ohms

 

• 10 MHz ..18.5GHz bandwidth
• Measurement range from -50 dBm to +20 dBm
• Replacement solution for conventional power meter and sensor combination
• Simple USB connection to laptop or PC
• Use multiple sensors on one laptop or PC

 

• 10MHz to 3600MHz or 6000MHz frequency range
• Resolution bandwidths from 300Hz to 10MHz (1:3:10)
• -120dBm typical noise floor at -40dBm ref. level/10kHz RBW
• Measurement in dBm or dBuV, mV or uW
• Zero span mode with AM and FM audio demodulation
• Trace modes of normal, peak hold and trace average
• USB interfaces for Flash drives and PC connection

 

• CPX200 - compact dual output 2 x 175 watts
• CPX400A - compact dual output 2 x 420 watts
• CPX400D - compact dual output 2 x 420 watts
• CPX400DP- programmable dual output 2 x 420 watts

 

• 1 µHz to 25 MHz range(sine and square)
• 1 µHz resolution
• 128K points at up to 125MS/s Arbitrary waveforms
• True pulse generator with variable delay and variable rise/fall

 

• 0.001Hz to 10MHz frequency range
• 6 digits or 1mHz resolution
• 1ppm stability and 10ppm one year accuracy
• Low distortion, high spectral purity sine waves

 

• 10MHz to 3600MHz or 6000MHz frequency range
• Resolution bandwidths from 300Hz to 10MHz (1:3:10)
• -120dBm typical noise floor at -40dBm ref. level/10kHz RBW
• Measurement in dBm or dBuV, mV or uW
• Zero span mode with AM and FM audio demodulation
• Trace modes of normal, peak hold and trace average
• USB interfaces for Flash drives and PC connection

 

• Provides an EN61000-3-2 compliant source
• 1000W power capability at 230V
• Up to 4·4A rms load current and up to 10A peak currents

 

• Frequency, period, pulse width, frequency ratio, duty cycle, and event counter modes
• DC to 6000MHz range, 0.001mHz resolution
• High impedance measurement up to 125 MHz
• AC or DC coupling, 1M/50Ohm selection, polarity invert
• Switchable attenuator, threshold control

 

• Up to 60 volts and up to 50 amps maximum
• PowerFlex design gives variable voltage & current combinations
• Higher current capability at lower voltages