300 kHz to 4 GHz/ 8 GHz or
10 MHz to 14 GHz/ 20 GHz
Instruments with two or four test ports - for multiport and balanced measurements
Two internal sources (four-port models) - to provide RF and LO signals for mixer measurements by means of a single unit
Capability to perform balanced measurements - to characterize balanced DUTs by their mixed mode S-parameters
Optional automatic calibration units - to speed up calibration and avoid operator errors
60001 points per trace
Dynamic range better than 123 dB (typ. 130 dB)
Power sweep range >50 dB
Measurement time < 4.5 ms for 201 test points (frequency sweep)
Switching time between channels < 1 ms
Switching time between instrument setups < 10 ms
Data transfer time < 0.7 ms (201 test points via RSIB)
Simultaneous measurement of more than one DUT
Intuitive Windows-based operation via mouse
Operation by means of hardkeys and softkeys
Large number of channels, traces and setups that can be loaded simultaneously
LXI Class C conformant

Optiuni recomandate

R&S ZVB4 Vector Network Analyzer 2 ports, 300 kHz to 4 GHz Test ports: N (f)
R&S ZVB4 Vector Network Analyzer 4 ports, 300 kHz to 4 GHz Test ports: N (f)
R&S ZVB8 Vector Network Analyzer 2 ports, 300 kHz to 8 GHz Test ports: N (f)
R&S ZVB8 Vector Network Analyzer 4 ports, 300 kHz to 8 GHz Test ports: N (f)
R&S ZVB14 Vector Network Analyzer 2 ports, 10 MHz to 14 GHz Test ports: 3.5 mm (m), compact version
R&S ZVB14 Vector Network Analyzer 2 ports, 10 MHz to 14 GHz Test ports: 3.5 mm (m), high-box version
R&S ZVB14 Vector Network Analyzer 4 ports, 10 MHz to 14 GHz Test ports: 3.5 mm (m)
R&S ZVB20 Vector Network Analyzer 2 ports, compact version 10 MHz to 20 GHz Test ports: 3.5 mm (m)

Alte produse Rohde & Schwarz

ANALIZOR DE SPECTRU IN TIMP REAL 10 HZ..7/ 13.6/ 30/ 40 GHZ ROHDE & SCHWARZ FSVR

• 10 Hz to 7 GHz, 13.6 GHz, 30 GHz or 40 GHz Frequency range
• 40 MHz real-time analysis bandwidth
• Spectrum with persistence function
• Spectrogram display
• Display of power versus time
• Triggering on frequency masks

POWERMETRU RF USB 10 MHZ..18 GHZ ROHDE & SCHWARZ NRP-Z22

• 10 MHz to 18 GHz
• -57 dBm to +33 dBm (2 nW to 2 W)
• 90 dB dynamic range for CW and modulated signals

OSCILOSCOP DIGITAL 2 X 1 GHZ ROHDE & SCHWARZ RTO1012

• 1 GHz bandwidth
• 2 analog channels
• 10 GSa/s sample rate on each channel

ANALIZOR SEMNAL TV PORTABIL 100 KHZ..3.6/ 8 GHZ ROHDE & SCHWARZ ETH

• TV, spectrum and network analyzer in a single box
• Frequency range up to 3.6 GHz or 8 GHz
• High-precision demodulator (MER typ. 45 dB)

ANALIZOR DE SPECTRU 9 KHZ..3 GHZ / 6 GHZ / 18 GHZ ROHDE & SCHWARZ FSL

• 9 kHz to 3 GHz / 6 GHz / 18 GHz Frequency range
• Resolution bandwidth 300 Hz to 10 MHz, opt. to 10 Hz
• 20 MHz I/Q demodulation bandwidth (28 MHz for FSL18)
• Best RF characteristics in its class
• Optional tracking generator

OSCILOSCOP DIGITAL 4 X 2 GHZ ROHDE & SCHWARZ RTO1024

• 2 GHz bandwidth
• 4 analog channels
• 10 GSa/s sample rate on each channel

ANALIZOR SEMNAL TV, BROADCAST SI SUNET 500 KHZ..3 GHZ ROHDE & SCHWARZ ETL

• Frequency range from 500 kHz to 3 GHz
• TV, FM (radio), video, audio, MPEG-2 transport stream and spectrum analysis
• FPGA and chip-based realtime demodulators for analog TV, DVB-T, DVB-T2, DVB-H, ATSC/8VSB, ATSC Mobile DTV, ISDB-T(B), J.83/A/C, DVB-C, J.83/B, DTMB, T-DMB/DAB and FM (radio)
• Baseband outputs
• Video and Audio signal generator
• MPEG-2 transport stream generator/recorder

ANALIZOR DE RETEA VECTORIAL 9 KHZ..3/ 6/ 13.6 GHZ ROHDE & SCHWARZ ZVL

• 9 kHz to 3 GHz/ 6 GHz or 13.6 GHz
• Bidirectional two-port vector network analyzer
• Measurement of all four S-parameters, impedance, admittance and stability

ANALIZOR DE SPECTRU 9 KHZ..3 GHZ / 6 GHZ ROHDE & SCHWARZ FSC

• 9 kHz to 3 GHz or 6 GHz Frequency range
• 10 Hz to 3 MHz RBW
• High sensitivity

R&S ESW EMI TEST RECEIVER

• Ultrafast measurements with FFT-based time domain scan
• Preselection with selectable highpass filters and notch filters for the ISM bands
• EMI test receiver and signal and spectrum analyzer in a single box