68-channel portable logic analyzer
48-channel pattern generator with up to 300 MVector/s speed and 16 M vector depth
4 GHz (250 ps) timing zoom with 64 K memory
1.0 GHz / 500 MHz (half / full-channel) conventional timing with deep memory
500 MHz transitional timing
up to 450 MHz State clock rates
up to 500 Mb/s Data rates
up to 32 M acquisition memory depth
15-inch (38.1 cm) color display with touch screen available(option 103)
Comprehensive single-ended signal support, threshold is adjustable in -5 V to 5 V (10 mV increments)
Automated threshold/sample position setup for accurate measurements on high-speed buses
Simultaneous eye diagrams on all channels identify problem signals quickly
Selectable memory depths: 1 M, 4 M, 16 M, 32 M

Optiuni recomandate

16720A-011	TTL Clock Pod and Lead Set OPT
16720A-013	Data pod and lead set, 3-state TTL/CMOS
16720A-014	TTL Data Pod and Lead Set
16720A-015	Clock pod and lead set, 2.5 volt
16720A-016	Data pod and lead set, 2.5 volt
16720A-017	Clock pod and lead set, 3.3 volt
16720A-018	Data pod and lead set, 3-state 3.3 volt
16720A-021	ECL Clock Pod and Lead Set
16720A-022	ECL Terminated Data Pod and Lead Set
16720A-023	ECL Unterminated Data Pod Lead Set
16720A-031	Clock pod and lead set, 5 volt PECL
16720A-032	Data pod and lead set, 5 volt PECL
16720A-033	Clock pod and lead set, 3.3 volt LVPECL
16720A-034	Data pod and lead set, 3.3 volt LVPECL
16720A-041	Clock pod and lead set, 1.8 volt
16720A-042	Data pod and lead set, 1.8 volt
16720A-051	LVDS Clock Pod and Lead Set
16720A-052	LVDS Data Pod and Lead Set
16800A-0B3	Service Manual
16800A-103	Front Panel with 15 inch display and touchscreen
16800A-109	External removable hard drive for 16800 series logic analyzers
16822A-001	Standard 1 M acquisition memory depth
16822A-004	Increase acquisition memory depth to 4M
16822A-016	Increase acquisition memory depth to 16M
16822A-032	Increase acquisition memory depth to 32M
16822A-A6J	ANSI Z540 Compliant Calibration
E5346A	Probe, 34 channel single-ended Mictor connector, connects to 40-pin LA cable
E5383A	Probe, 17-channel single-ended flying leads, connects to 40-pin LA cable
E5385A	Probe, 34 channel single-ended Samtec connector, connects to 40-pin LA cable
E5394A	Probe, 34 channel single-ended soft touch connectorless, connects to 40-pin LA cable
E5394A-001	Retention Module
E5396A	Probe, 17 channel single-ended soft touch connectorless, connects to 40-pin LA cable
E5396A-001	Retention Modules
E5403A	Kit of 5 retention modules for Pro Series Soft Touch Connectorless Probes
E5404A	Probe, 34 channel, soft touch pro, single-ended, connects to 40-pin LA cable

Alte produse KEYSIGHT

SURSE PROGRAMABILE MULTIPLE 25-160W AGILENT 662XA

• Multiple sources in an integrated one-box solution
• Dual-range linear outputs
• 2, 3 or 4 independent isolated outputs
• Stable, low ripple and noise power source
• Measured V & I readback over GPIB

MODUL SWITCH PXI 60-CANALE 100VRMS/1A AGILENT M9131A

• General purpose switching to control external devices or
• switching in light loads or power supplies
• 64-channel SPDT switch
• 100Vrms
• 1A switch/carry current
• 20W max power

GENERATOR IMPULSURI 80 MHZ AGILENT 81104A 81105A

• 1 mHz to 80 MHz
• 1 or 2 Channels(order 2 x 81105A modules)
• 3 ns to 200 ms variable transition time
• Up to 10 Vpp into 50 O (20 Vpp into open circuit)

PUNTE MASURA CAPACITATI 120 HZ..1 MHZ AGILENT E4981A

• 120 Hz, 1 kHz, 1 MHz measurement frequency
• 0.07% Basic accuracy
• High-speed measurements to 2.3 ms @ 1 MHz

OSCILOSCOP DIGITAL 2 X 100 MHZ AGILENT DSO7012B

• 100 MHz bandwidth
• 2 GSa/s sample rate
• 2 analog channels
• Standard 8 Mpts MegaZoom III deep memory

MODUL USB DIGITAL I/O 64-CH. OUTPUT AGILENT U2653A

• Hi-Speed USB 2.0 (480 Mbps)
• 64 Output opto-isolated lines
• Functions as standalone or modular unit
• Up to 1250 Vrms isolation protection

SURSA CURENT ALTERNATIV CU ANALIZA PUTERE 1750VA AGILENT 6813B

• Power: 1750 VA
• Voltage rms: 300 V
• Current rms: 13 A
• Repetitive & non-repetitive peak current: 80 A

MODUL PXI MATRICE RF 3GHZ 1 X 16, 75 OHM AGILENT M9153A

• RF signal routing to 3 GHz for 75 ohm applications
• 1x16 75 ohm RF switch multiplexer to 3GHz
• 30V, 1A, 10W switching
• 75 ohm input impedance
• 56 dB isolation at 1 GHz

MODUL MULTIPLEXOR QUAD 4-CANALE 75 OHM AGILENT 34942A

• Quad 4-channel multiplexers
• DC to 1.5 GHz, 75 Ohm
• High isolation, low VSWR
• 30V, 0.5A, 10W switching
• 75 Ohm mini SMB connectors

OSCILOSCOP DIGITAL 2 X 500 MHZ CU ANALIZOR LOGIC 16 CANALE AGILENT MSO7052B

• 500MHz bandwidth
• 4 GSa/s sample rate
• 2 analog plus 16 digital channels
• Standard 8 Mpts MegaZoom III deep memory