Politici de confidentialitate

Date GDPR Termeni utilizare Politica cookies Confidentialitate Livrare si plata Cum comanzi?
Accept conditiile de utilizare Continua
 
office@distek.ro  +40 760952425   Cere ofertă (0) 
 

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 


Source-Meter de precizie curenti-tensiune Keithley 2400

Cod: Keithley 2400


 
Brosura produs PDF, 0.4 Mb

Descriere

  • Five instruments in one (IV Source, IVR Measure)
  • Six models: 20 - 100W DC, 1000W pulsed, 1100V to 1uV, 10A to 10pA
  • Source and sink (4-quadrant) operation
  • 0.012% basic measure accuracy with 5½-digit resolution
  • 2-, 4-, and 6-wire remote V-source and measure sensing
  • 1700 readings/second at 4½ digits via GPIB
  • Pass/Fail comparator for fast sorting/binning
  • Available high speed sense lead contact check function
  • Programmable DIO port for automation/handler/prober control
  • Standard SCPI GPIB, RS-232, and Keithley Trigger Link interfaces
  • Keithley LabTracer 2.0 I-V curve tracing application software
 

Accesorii standard

  • Model 8605 Test Leads
  • LabVIEW Software Drive (downloadable)
  • LabTracer Software(downloadable)
 

Optiuni recomandate

  • 2400  200V, 1A, 20W SourceMeter
  • 2400-C  200V, 1A, 20W SourceMeter with Contact Check
  • 2400-LV  20V, 1A, 20W SourceMeter
  • 2410  1100V, 1A, 20W SourceMeter
  • 2410-C  1100V, 1A, 20W SourceMeter with Contact Check
  • 2420  60V, 3A, 60W SourceMeter
  • 2420-C  60V, 3A, 60W SourceMeter with Contact Check
  • 2425  100V, 3A, 100W SourceMeter
  • 2425-C  100V, 3A, 100W SourceMeter with Contact Check
  • 2430  100V, 10A, 1000W Pulse Mode SourceMeter
  • 2430-C  100V, 10A, 1000W Pulse Mode SourceMeter with Contact Check
  • 2440  40V, 5A, 50W SourceMeter
  • 2440-C  40V, 5A, 50W SourceMeter with Contact Check
 

Alte produse KEITHLEY

MULTIMETRU DIGITAL 6.5 DIGIT CU ANALIZA AUDIO THD KEITHLEY 2015

• 6.5 digit DMM
• THD, THD+Noise and SINAD measurements
• 20Hz-20kHz sine wave generator
• 4Vrms single-ended or 8Vrms differential output
• Identifies peak spectral components(2015-P model)

 
PLACA PCI CU 2 IESIRI ANALOGICE KEITHLEY KPCI-3132

• 20mA output current without power supply
• 2 analog outputs

 
MULTIMETRU DIGITAL 6.5 DIGIT CU ANALIZA AUDIO THD KEITHLEY 2016

• 6.5 digit DMM
• THD, THD+Noise and SINAD measurements
• 20Hz-20kHz sine wave generator
• 9.5Vrms single-ended or 19Vrms differential output
• Identifies peak spectral components(2016-P model)

 
NANOVOLTMETRU TENSIUNI MICI KEITHLEY 2182A

• Make low noise measurements at high speeds
• typically just 15 nV p-p noise at 1s response time
• 40..50 nV p-p noise at 60ms

 
SURSA DE PRECIZIE CURENT AC SI DC KEITHLEY 6221

• Source and sink (programmable load) 100fA to 100mA
• 10^14 O output impedance ensures stable current sourcing into variable loads
• Source AC currents from 2pA to 100mA for AC characterization of components and materials

 
MULTIMETRU DIGITAL DE PRECIZIE 6.5 DIGIT KEITHLEY DMM 2000

• 6.5 digit resolution
• 0.002% 90-day basic accuracy
• 2000 readings/second at 4-1/2 digits

 
PLACA DE ACHIZITII PCI 16-CANALE 400KSA/S KEITLHEY KPCI-3103

• 12-bit resolution
• Throughput of up to 400kS/s
• Digital I/O scanning speeds of up to 3MHz
• 16 single-ended or 8 differential analog inputs
• 23 digital I/O lines

 
SISTEM 2 SLOTURI DMM, ACHIZITII DATE, SWITCH, DATALOGGER KEITHLEY 2700

• Combines functions of DMM, switch system, and datalogger
• True 6½-digit (22-bit) resolution
• Choice of 12 switch/control plug-in modules
• Up to 200 differential input channels

 
KEITHLEY DMM6500 MULTIMETRU 6.5DIGIT DE PRECIZIE CU ECRAN TACTIL

• Precizie 0,0025% DCV (1 an)
• Digitalizare 1 Msample/s, 16 biți
• Opțiune card de scanare cu 10 canale
• 100 nV
• 10 pA
• 1 µOhm

 
SOURCE-METRU DIGITAL 6.5 DIGIT PT. TESTARE AIRBAG-URI KEITHLEY 2790

• 6.5 digit DMM
• Single-instrument solution for continuity and hi-pot type leakage resistance measurements
• Programmable constant V source (50-500V) supports high speed, high resistance measurements
• Programmable constant I source (0-50mA) with dry circuit clamp helps prevent device stress or damage during low resistance measurements