Hantek USBXI-1070 Sistem achizitii de date LXI, USB, LAN, WiFi, RGB

• High bandwidth 70MHz-200MHz Oscilloscope, 1GSa/s sample rate, 2M Memory depth.
• 25Mz Arb. Waveform Generator, 200 Mesa/s DDS, 12 bit vertical resolution, easy for simulating transducer
• 6000 Counts DMM, AC/DC voltage, AC/DC current, resistance, break, capacitance, and diode function.
• FFT spectral analysis; Waveform Math: add, subtract, multiply and divide; X-Y mode; more than 20 automatic measurements; PASS/FAIL Check function, apply to engineering application.

 

• Overload protection circuit
• Low ripple voltage:<1mVp-p
• Output polarity:positive or negative
• Rugged reinfirced metal frame construction

 

• USB host and device connectivity, standard
• Multiple automatic measurements
• Four math functions, including FFTs standard
• Provides software for PC real-time analysis

 

• 14bits D/A resolution.
• USB2.0 interface, no external power source required, easy to use.
• Automatic calibration.
• One computer can connect many DDS, extend channel easily.

 

• Serial bus triggering and decode, Bus protocol information can be quickly and intuitively displayed in table form.
• Waveform averaging, afterglow, lightness control, reverse, add, subtract, multiply, divide, X-Y display.
• FFT spectrum analyzer
• One computer could connect with multiple oscilloscopes, expand the channel number easily.
• USBXI standard interface, easy to insert into USBXI case to constitute assembling instrument.

 

• Be suitable for notebook computer, product line maintenance, be used easily on business.
• Dimensions (mm):205(L) x120(W) x35(H), be carried easily.
• High performance, 250MS/s real-time sampling, 20MHz-80MHz bandwidth.
• Operating System: Windows 10, Windows 8, Windows 7, Windows NT, Windows XP, VISTA.
• 23 measurement functions, PASS/FAIL Check, be suitable for technical application.

• Utilizes SMT technology.
• LCD display to show voltage and current.
• LCD display to show regulated voltage and current.
• Green/Amber LCD back-light selectable.

 

• AC/DC frequency range: Up to 20 kHz
• Effective Measurement Range: 20mA to 65A DC
• It is a transducer which allows your multimeter to measure current data and enable your oscilloscope to measure the current waveforms.

 

• 8--36V wide range of input voltage, suitable for vehicle power test.
• USB 2.0 interface, LAN optional.
• More than 20 kinds of automatic measurement function, PASS/FAIL Check function, is suitable for engineering application.
•  Excellent industrial design,similar interface with bench oscilloscope. Easy to use.

 

• Abundant trigger function, double timebase sampling, easy to observe two waveforms in different frequency.
• Record and replay of more than 1000 waveforms.
• Large 5.6 inch TFT Color LCD Display; High Resolution(640*480)
• USB Host/Device 2.0 full-speed interface; support removable disk; WIFI/LAN Option, easy to control by PC or long-distance.
• Waveform data can be output in WORD，EXCEL, BMP, JPG as time and voltage.