Hantek MSO5054F(G) Osciloscop digital cu generator si analizor logic

• Overload protection circuit
• Low ripple voltage:<1mVp-p
• Output polarity:positive or negative
• Rugged reinfirced metal frame construction

 

• Abundant trigger function, double timebase sampling, easy to observe two waveforms in different frequency.
• Record and replay of more than 1000 waveforms.
• Large 5.6 inch TFT Color LCD Display; High Resolution(640*480)
• USB Host/Device 2.0 full-speed interface; support removable disk; WIFI/LAN Option, easy to control by PC or long-distance.
• Waveform data can be output in WORD，EXCEL, BMP, JPG as time and voltage.

 

• More than 20 kinds of automatic measurement function, PASS/FAIL Check function, fit for engineering application.
• Waveform averaging, afterglow, lightness control, reverse, add, subtract, multiply, divide, X-Y display.
• FFT spectrum analyzer
• One computer could connect with multiple oscilloscopes, expand the channel number easily.

 

• Serial bus triggering and decode, Bus protocol information can be quickly and intuitively displayed in table form.
• Waveform averaging, afterglow, lightness control, reverse, add, subtract, multiply, divide, X-Y display.
• FFT spectrum analyzer
• One computer could connect with multiple oscilloscopes, expand the channel number easily.
• USBXI standard interface, easy to insert into USBXI case to constitute assembling instrument.

 

• 200 MSa/s of sample rate, 12 bits of vertical resolution.
• 25Mz Arbitrary waveform output (sine wave up to 75 Mz).
• One computer can be linked with several DDS-3X25 to expand multi-channels.
• 50 MHz frequency counter.
• 12bits pattern generator.

 

• 14bits D/A resolution.
• USB2.0 interface, no external power source required, easy to use.
• Automatic calibration.
• One computer can connect many DDS, extend channel easily.

 

• Serial bus triggering and decode, Bus protocol information can be quickly and intuitively displayed in table form.
• Integrated USB Host/Device, convenient to communicate with PC. Support U-stick storage/systerm update.
• Support a variety of SCPI remote control command
• Support optional RS232 port, LAN port. (Optional)

 

• USB host and device connectivity, standard
• Multiple automatic measurements
• Four math functions, including FFTs standard
• Provides software for PC real-time analysis

 

• 5 1/2 digit input/output display.
• Manual/auto cold junction compensation and setting.
• The temperature value can be directly measured/output.
• Auto power off when the voltage of battery is low.

 

• The waveform data could be output to EXCEL,BMP,JPG.
• Waveform averaging, afterglow, lightness control, reverse, add, subtract, multiply, divide, X-Y display.
• FFT spectrum analyzer
• One computer could connect with multiple oscilloscopes, expand the channel number easily.
• Provide secondary development library DLL; Provide LabviewVBVCQT developing examples.