0 to 100 mV, 0 to 30 V DC Voltage measure
0 to 100mV, 0 to 20 V DC Voltage source / simulate
0 to 24 mA Current measure / source / simulate
0 to 4000 O Resistance measure / source / simulate
1 to 15 kHz Frequency measure / source / simulate
More precise measurement and calibration source performance, accuracies of 0.01%.
Two separate channels; measure, source and view process signals simultaneously
Measure volts, mA, RTDs, thermocouples, frequency, and resistance to test sensors and transmitters
Source/simulate volts, mA, thermocouples, RTDs, frequency, and pressure to calibrate transmitters
Measure or source pressure using any of 29 Fluke 700Pxx Pressure Modules
Source mA with simultaneous pressure measurement to conduct valve and I/P tests
Integrated pressure switch test allows you to capture the set, reset and deadband of a switch
Memory storage for up to 8 calibration results, return stored calibration data from the field for later analysis
Transmitter error% calculation, interpret calibration results without a calculator
Perform fast linearity tests with auto step and auto ramp features
Power transmitters during test using 24 V loop supply and simultaneous mA measurement
Store frequently-used test setups for later use
Frequency totalizer and frequency pulse train source mode for enhanced flowmeter testing
HART mode inserts 250 ohm resistor in mA measure and source for compatibility with HART instrumentation
Custom RTD curves, add calibration constants for certified RTD probes for enhanced temperature measurement.
New voltage input protection design for improved reliability
Three-year warranty

Accesorii standard

One set of AC72 alligator clips
One set of stackable test leads
One set of TL 75 testleads
User manuals
NIST- traceable calibration report and data

Alte produse FLUKE

CALIBRATOR MULTIFUNCTIONAL DE PROCES FLUKE 741B

• 0 to 300 V DC/AC Voltage measure
• 0 to 15 V DC Voltage source / simulate
• 0 to 110 mA DC Current measure
• 0 to 22 mA DC Current source / simulate
• 0 to 11 kO Resistance measure / source / simulate
• 1 to 50 kHz Frequency measure / source / simulate

APARAT DE MASURA PRIZE DE PAMANT FLUKE 1625-2 GEO

• 3- and 4-pole Fall-of-Potential, earth resistance loop testing
• 4-pole Soil Resistivity testing
• Selective earth ground rod testing using 1 clamp
• Stakeless earth ground rod testing using 2 clamps
• IP56 rated for outdoor use
• USB data storage and transfer
• Automatic Frequency Control (AFC)
• R* measurement - calculates earth ground impedance at 55 Hz

INREGISTRATOR CALITATE TENSIUNE SI PUTERE FLUKE VR1710

• 70 V to 300 V Operating Voltage
• Fast and easy recording of voltage trends, dropouts, and power quality
• Continuous recording of all values with no gaps
• Flicker recording to EN 61000-4-15, individual harmonic and THD values
• Min, Max, and Average RMS values

FLUKE 123B 123B/S SCOPEMETER OSCILOSCOP PORTABIL 2X20MHZ

• 2-canale 20MHz
• Osciloscop digital cu intrare dublă şi multimetru
• Lătime de bandă a osciloscopului de 40 MHz sau 20 MHz
• Două multimetre digitale true-RMS cu limită de numărare de impulsuri 5000
• Măsurarea energiei (W, VA, VAR, PF, DPF, Hz)
• Tensiune, curent şi armonice de energie
• Adaptor WiFi optional conectat la port USB intern pentru transfer wireless de informatii către PC, laptop sau aplicatia mobilă Fluke Connect�®*1

CALIBRATOR MULTIFUNCTIONAL DE PROCES FLUKE 753

• Measure volts, mA, RTDs, thermocouples, frequency
• ohms to test sensors, transmitters and other instruments
• Source/simulate volts, mA, thermocouples, RTDs, frequency, ohms, and pressure
• Power transmitters during test using loop supply with simultaneous mA measurement

TELEMETRU LASER PORTABIL 100M FLUKE 424D

• The ultimate Fluke laser distance meter
• Measures up to 100 m (330 feet)
• Feature-rich meter includes tilt sensor for hard-to-reach measurements, corner angle feature and compass

CLESTE POWERMETRIC CU ANALIZOR PUTERE FLUKE 345

• 2000A AC/DC current
• 600 V CAT IV power analyzer
• Data logging
• Troubleshoot harmonics
• Inrush current

POMPA VACUUM GENERARE PRESIUNI JOASE FLUKE 700LTP-1

• hand operated pressure pump
• designed to generate either vacuum to -13 psi / -.90 bar or pressures to 100 psi / 6.9 bar
• Pump can be easily cleaned without disassembly
• Adjustable pressure relief valve with slow-bleed capability. Allows the slow release pressure at a controlled rate
• Quick fit connectors, one for the reference port for connection to a Fluke 700 series pressure module and one to connect to a unit under test
• Slim design, easy to carry and use

CLESTE CURENT CALIBRARE PROCES FLUKE 771

• 0 to 21 mA, 10 to 50 mA Current measure
• Best in class 0.2 % accuracy
• 0.01 mA resolution and sensitivity

CLESTE AMPERMETRIC DE CURENT 400A FLUKE 321

• Measures AC current to 400 A with 0.1 A resolution
• Measures AC volts to 600 V, with 0.1 V resolution to 400.0 V
• Resistance measurement to 400 O
• Precise measurements with 1.8% basic accuracy