0 to 100 mV, 0 to 30 V DC Voltage measure
0 to 100mV, 0 to 10 V DC Voltage source / simulate
0 to 24 mA Current measure / source / simulate
0 to 3200 O Resistance measure / source / simulate
1 to 10 kHz Frequency measure / source / simulate
Small, streamlined shape makes it easy to carry
Rugged, reliable design stands up to field use
Easy to read measure/source screen lets you view input and output simultaneously
Measure volts, mA, RTDs, thermocouples, frequency, and ohms to test sensors and transmitters
Source/simulate volts, mA, thermocouples , RTDs, frequency, ohms, and pressure to calibrate transmitters
Measure/source pressure using any of 29 Fluke 700Pxx Pressure Modules
Source mA with simultaneous pressure measurement to conduct valve and I/P tests
Support flow meter testing with frequency and CPM functions
Perform fast linearity tests with auto- step and auto-ramp features
Power transmitters during test using loop supply with simultaneous mA measurement
Handling of fast pulsed RTD transmitters and PLCs, with pulses as short as 10 ms
Store frequently used test setups for later use
Backlight lets you work in poor light
Large battery capacity of four AA cells
Battery door for easy changes

Accesorii standard

One set of AC72 alligator clips
One set of stackable test leads
One set of TL 75 testleads
User manuals
NIST- traceable calibration report and data

Alte produse FLUKE

TERMOMETRU INFRAROSU CU CAMERA INTEGRATA FLUKE VT02

• Interval de masurare a temperaturii : -10 °C si +250 °C
• Precizie: ±2°C sau ±2%
• Frecventa de captura a imaginii : 8 Hz
• Banda spectrala infrarosu : între 6,5 µm si 14 µm
• Câmp de vizualizare 20° X 20°
• Suport de stocare Card Micro SD de 4 GB

FLUKE II500 CAMERA ACUSTICA INSPECTIE SI DETECTIE SCAPARI GAZ COMPRIMAT

• Detectare vizuală ușoară, rapidă și sigură a scurgerilor de gaz comprimat.
• Ecranul tactil LCD de 7" afișează o hartă sonoră SoundMap™ peste imagini vizuale, facilitând localizarea rapidă a scurgerilor.
• Interfața intuitivă nu necesită instruire pentru echipele de întreținere.

TESTER TENSIUNE SI CONTINUITATE FLUKE T50

• Voltage test
• Optical and acoustical continuity test
• Display: 10 LED's

CALIBRATOR PORTABIL DE BUCLA FLUKE 707EX

• 0 to 28 V DC Voltage measure
• 0 to 24 mA Current measure
• 0 to 20 mA Current source / simulate
• mA accuracy of 0.015%
• For use in explosion endangered areas ATEX certifed ( II 2 G Eex ia IIC T4)

ANALIZOR PORTABIL CALITATE ENERGIE FLUKE 43B

• Power Quality Analyzer Measures power (W, VA, VAR) and power factor (PF, DPF)
• Oscilloscope Dual-channel scope 20 MHz bandwidth
• Multimeter
• Recorder
• Harmonics Up to 51st
• Power One and three phase

RLC-METRU 50 HZ..100 KHZ FLUKE 6304/ 6304C

• 50, 60, 100, 120 Hz, 200 Hz to 20 kHz (100 Hz steps), 100 kHz test frequencies
• 0.1 % basic accuracy (0.05 % for PM 6304C)
• Easy to use, at-a-glance display

FLUKE TIX520 CAMERA DE TERMOVIZIUNE 320X240

• Fluke TiX500 320x240 pixels, -20 °C..+650 °C
• Fluke TiX520 320x240 pixels, -20 °C..+850 °C
• Fluke TiX560 320x240 pixels, -20 °C..+1200 °C

TERMOMETRU INFRAROSU CU CAMERA INTEGRATA FLUKE VT04A

• Interval de masurare a temperaturii : -10 °C si +250 °C
• Precizie: ±2°C sau ±2%
• Frecventa de captura a imaginii : 8 Hz
• Banda spectrala infrarosu : între 6,5 µm si 14 µm
• Câmp de vizualizare 28° X 28°
• Suport de stocare Card Micro SD
• Alarma de monitorizare automata

MULTIMETRU DE PROCES FLUKE 789

• 0 to 1000 V DC/AC Voltage measure
• 0 to 1 A Current measure
• 0 to 20 mA, 4 to 24 mA Current source
• DMM and loop calibrator in one tool
• HART mode setting with loop power

CALIBRATOR DE PRESIUNE FLUKE 721

• 16 PSI (1.1 bar) or 36 psi (2.48 bar) low pressure sensor
• 7 high pressure ranges including 100, 300, 500, 1000, 1500, 3000 or 5000 psi (6.9, 20, 24.5, 69, 103.4, 200, 345 bar)
• Ideal for gas flow calibration (custody transfer) applications
• Two isolated, stainless steel, pressure sensors with 0.025 % accuracy
• Pt100 RTD input for temperature measurement, (probe optional)
• Measures 4 to 20 mA signals
• Internal 24 V loop power supply can power a transmitter under test
• Measure up to 30 V dc, check 24 V loop power supplies