Tester umiditate sol EXTECH MO750 Umidometru Higrometru

• Displays moisture in wood and other building materials plus Air Temperature and Relative Humidity
• Digital LCD readout with analog bargraph and numerical displays
• Simultaneous digital readout of moisture content plus ambient temperature or humidity with analog bargraph display of moisture, Max moisture values, and programmable wet/dry indication
• Use on wood, paper, wall board, sheet rock, cardboard, plaster, concrete, and mortar

 

• Smart Auto Sensing technology enables the meter to recognize the input and automatically switch to the correct mode of operation
• For AC Voltage, Auto Sense feature evaluates input signal and adjusts Input Impedance to eliminate effects of ghost voltages
• 0.6" (16mm) open jaw size
• True RMS for accurate readings of noisy, distorted or non-sinusoidal waveforms
• Built-in non-contact voltage detector with LED indicator
• 10,000 count backlit LCD display

 

• Relative Humidity, Temperature, Dew Point, and Wet Bulb measurement
• Adjustable data sampling rate
• Stores 99 readings manually and 20M readings via 2G SD card
• Type K/J Thermocouple input for high temperature measurements
• Large backlit dual LCD display

 

• Pinless moisture measurement depth to <0.75" (20mm)
• Measures Moisture up to 99.9% for Wood and 56.5% for other building materials
• Displays moisture level in wood and building materials such as wall board, sheet rock, cardboard, plaster, concrete, and mortar
• Audible Alert - Tone rate beeps faster as the moisture level increases

 

• Two relay outputs
• Dual 4-digit LED displays of process and setpoint values
• User friendly menus and tactile keypad for easy programming
• One-touch autotuning for quick setup & precise control

 

• Adjustable Voltage and Current output
• Easy snap terminals for fixed 5V/0.5A and 12V/1A outputs
• Constant Voltage or Current
• Current limiting indicator
• Overload and short circuit protection
• Binding post terminals for variable supply

 

• Integrated Bluetooth® connects with most Android devices to transmit readings for remote viewing
• Works with free Android App to display large, easy-to-read values up to 30ft (10m) away
• Low Pass Filter conditions the inputs to provide accurate Voltage and Frequency readings on motors, drives and other large electrical equipment that generate electrical noise
• Datalogging stores up to 2500 readings with date and time stamp

 

• True RMS for better accuracy when measuring distorted waveforms
• 2000 count large backlit dual LCD with easy-to read digits
• Low current capability with resolution to 0.1µA
• Input fuse protection
• Max Hold, Data Hold and Auto power off
• Complete with test leads and 9V battery

 

• Dual LCD simultaneously displays Carbon Monoxide (CO) level and maximum CO reading taken from when the meter was powered on
• Long life electrochemical sensor
• Adjustable CO warning level at 25, 30, 35, 45, 50, 70, 100 and 200ppm (alarm is preset to 25ppm)
• Audible alarm when CO level reaches the warning set point level
• Choose from 3 calibration points: 0 (preset), 100, and 500ppm

 

• Built-in IR Thermometer with laser pointer for locating hot spots (6:1 Distance to Target Ratio)
• AC/DC Voltage, AC/DC Current, Resistance, Capacitance, Frequency, Temperature (Type K + IR), Duty Cycle, Continuity / Diode
• 4000 count large backlit dual LCD with easy-to read digits
• Low current capability measure down to 0.1µA