This type 2 sound level meter meets ANSI and IEC 651 Type 2 standards. Ideal for noise surveys in the workplace, installing fire alarms and speaker systems and enforcing noise ordinances. Measures from 35 to 130dB in 2-ranges with accuracy of plus or minus 1.5dB. Data hold and Max hold functions. Backlit display allows use in dimly lit areas. Complete with microphone wind screen and 9V battery.

Features:

High accuracy meets ANSI and IEC 651 Type 2 standards
High and Low measuring ranges: 35 to 100dB (low) and 65 to 130dB (high)
Data Hold and Max Hold functions
Backlit LCD display to view in dimly lit area

Alte produse EXTECH

EXTECH EX530 MULTIMETRU DIGITAL PORTABIL INDUSTRIAL

• True RMS DMM with 11 functions and 0.06% basic accuracy
• AC/DC Voltage & Current, Resistance, Capacitance, Frequency, Temperature, Duty Cycle, Diode/Continuity
• Dual sensitivity frequency functions (electrical/electronic)
• 1000V input protection on all functions
• 20A max Current

EXTECH SDL700 TESTER DE PREIUNE CI INREGISTRARE DATALOGGER

• Accepts interchangeable transducers with ranges of 30, 150, 300psi (transducers sold separately)
• Meter automatically senses plug-in transducer's range and calibration
• Displays 10 types of pressure units
• Offset adjustment used for zero function to make relative measurements

EXTECH 382270 SURSA DE TENSIUNE CUADRUPLA 4 CANALE

• Two fully adjustable supplies combined with two auxiliary outputs
• Two 0 to 30V/0 to 5A outputs with selectable Constant Voltage and Constant Current modes
• Two auxiliary outputs with fixed current of 3 to 6.5V/3A and 8 to 15V/1A

DINAMOMETRU MASURARE FORTA INALTA 100KG EXTECH 475055

• Ranges: 0.05 to 100kg; 0.05 to 220lbs; 0.2 to 980 Newton
• Basic accuracy 0.5%
• Tension or Compression, Peak hold and Zero functions
• Positive/Reverse display for easy easy readability
• Large LCD with backlight feature

EXTECH 382213 SURSA TRIPLA DIGITAL DE TENSIUNE CC

• Adjustable Voltage and Current output
• Easy snap terminals for fixed 5V/0.5A and 12V/1A outputs
• Constant Voltage or Current
• Current limiting indicator

EXTECH 480826 TESTER CAMP ELECTROMAGNETIC PE TREI AXE

• Three axis (X, Y, Z direction) electromagnetic field measurement
• Ideal for EMF measurements around power lines, electrical appliances and industrial devices
• Wide measuring ranges (3 ranges of µTesla or mGauss)
• Big digit LCD display, Data hold
• Easy to use remote probe
• Complete with sensor with 3ft (930mm) cable, 9V battery, and hard carrying case

EXTECH DT100M TELEMETRU LASER

• 2" to 330ft (0.05 to 100m) measurement range
• Automatically calculates Area and Volume
• Indirect measurement using Pythagorean theorem
• Continous mode with min/max function
• Displays Sum (+) / Difference (-) of multiple readings
• Front or rear edge reference

EXTECH MG320 MEGOHMMETRU CAT IV TESTER IZOLATIE/TRUE RMS

• Measure Insulation Resistance to 20GO
• 5 Test Voltage ranges
• Polarization Index (PI) and Dielectric Absorption Ratio measurements (DAR)
• Low Resistance measurement with Zero function
• Programmable Timer feature sets the duration of test

EXTECH PQ3350-3 ANALIZOR PUTERE SI ARMONICI 3 FAZE

• Datalogging of single and 3-phase/3-wire or 3-phase/4-wire systems (up to 52,428 single phase readings or 17,476 3-phase readings)
• Flexible clamp probes can be used for wrapping around bus bars and wire bundles
• Large backlighting LCD displays up to 35 parameters in one screen
• Clamp-on True RMS power measurements with on-screen Harmonics display
• Simultaneous display of Harmonics and Waveform

EXTECH 38220 SURSA DE TENSIUNE 18V/3A

• Constant voltage or current
• Dual backlit LCD displays for voltage and current
• Short circuit protection
• Current limiting