Cable and Antenna Analyzer
E7000A 25 MHz to 4400 MHz
E7100A 25 MHz to 6000 MHz
Spectrum Analyzer Option
E7000-SA 100kHz to 3000 MHz

• High Performance
• Fast Measurement Speed
• Easy to Use
• Cost Effective
• Long Life Lithium Ion battery inside

Overview

E7000A series cable and antenna analyzer is a perfect instrument for wireless and broadcasting base station. It covers 25 MHz to 6000 MHz frequency span and fits for the wireless communication and broadcasting market.

E7000A series provides 3 GHz spectrum analyzer option. The spectrum analyzer option can be configured as spectrum analyzer, interference analysis, power meter, and field strength meter. With the multi-functional capabilities, it eliminates the need to carry and learn multiple instruments.

Return Loss/VSWR

With >42 dB return loss dynamic range, E7000A series verifies the cable and antenna system which conform to performance specifications.

Cable Loss

Cable loss function measures insertion loss within the cable feedline system. The E7000A series automatically calculates the average cable loss.

Distance-To-Fault

DTF (distance-to-fault )function troubleshoots systems and locate the problem.

E7000A series displays cable characteristic(VSWR and RETURN LOSS) versus distance. Using the tools, users can monitor small relative changes over time.

2-ports Transmission Measurements(With E7000-SA Option)

2-ports transmission measurement enables you to measure gain, isolation and insertion loss as well as sector-to-sector isolation verification.

USB Power Meter Sensor Option

The power meter sensor option provides RMS measurement for both CW and digital modulated signal. It supports 50M~6GHz frequency range.

Spectrum Analyzer Option (E7000-SA)

E7000-SA covers 100k Hz to 3 GHz frequency range.

With this option, E7000A series can provide spectrum analysis, power meter, ACPR, OBW and interference signal analysis functions.

GPS Receiver Option

GPS receiver option provides location (longitude, latitude, altitude) and Universal Time (UT) information. For the E7000A series, all measurement results can be saved with location and time information.

All in one tool
E7000A series is integrated with cable&antenna analyzer and spectrum analyzer. Users can perform measurement for wireless and broadcasting base station installation, maintenance with only one instrument – E7000 series. 

Friendly GUI
Better user interface and easy to use.

Fast measurement speed
With 1.5ms/point sweep time, it is better for field measurement.

Large internal memory 
With more than 1GB internal memory space, E7000A series can save more 2000 trace files.

Flexible calibration mode
E7000A series has 2 calibration modes. Standard OSL(OPEN-SHORT-LOAD) calibration is more accurate. Full span calibration is based on the stand OSL mode. With this mode, users don’t need to re-calibrate the E7000 series when change the frequency range. 

Easy data link
E7000A series has one 10M/100M LAN port. It supports standard SCPI program interface which is open to user for developing  user defined program. 
E7000A series has 2 USB ports. It is easy to import and export files between the instrument and USB disk.