Low Distorsion Power Source TTi AC1000A

• Frequency, period, pulse width, frequency ratio, duty cycle, and event counter modes
• DC to 6000MHz range, 0.001mHz resolution
• High impedance measurement up to 125 MHz
• AC or DC coupling, 1M/50Ohm selection, polarity invert
• Switchable attenuator, threshold control

 

• 10MHz to 6000MHz frequency range
• 10Hz setability, +/-1ppm frequency stability
• Locking to external frequency standard
• -110dBm to +7dBm amplitude, 0.1dB steps
• Full remote control through RS232, USB, LAN and GPIB

 

• 100 Hz, 120 Hz, 1 kHz, 10 kHz Selectable Measurement Freq
• 0.1% basic measurement accuracy
• Dual 5 digit high brightness displays

 

• 1MHz to 2700MHz frequency range
• Resolution bandwidths of 1MHz, 280kHz or 15kHz
• -96dBm typical noise floor at -20dBm reference level
• Measurement in dBm or dBµV, mV or µW
• Zero span mode with AM and FM audio demodulation

 

• Up to 60 volts and up to 50 amps maximum
• PowerFlex design gives variable voltage & current combinations
• Higher current capability at lower voltages

 

• 10MHz D.D.S. function with arbitrary
• 0.1mHz to 10MHz range
• 7 digit resolution

 

• DC to 3 GHz range, 0.001mHz resolution
• Large 10 digit display with full range of annunciators
• Internal rechargeable batteries for portable use
• AC or DC coupling, 1M/50Ohm selection, polarity invert

 

• 3 Hz to 3 GHz in two overlapping ranges
• Large 8.5 digit display with full range of annunciators
• Battery operation and lightweight, handheld format

 

• 16 MHz sine and square
• 4-channel independent or linked
• 40 MSa/s sample rate
• 12-bit vertical resolution

 

• 10MHz to 3600MHz or 6000MHz frequency range
• Resolution bandwidths from 300Hz to 10MHz (1:3:10)
• -120dBm typical noise floor at -40dBm ref. level/10kHz RBW
• Measurement in dBm or dBuV, mV or uW
• Zero span mode with AM and FM audio demodulation
• Trace modes of normal, peak hold and trace average
• USB interfaces for Flash drives and PC connection