Ideal Industries 33-929 FiberMASTER Optical Source

• Coax, 6Pin (RJ11/12), 8Pin (RJ45) Connectors for Copper Cable Testing
• Wiremap for Miswires, Split Pairs, Shorts and Opens
• Analog Tone Generator
• Hub Blink
• Cable Length
• Distance to Open / Short (TDR)
• PoE Detection with Voltage Information
• Media Service Detection
• Ethernet Detection with Network Rate and Duplex Information

 

• Physical tests of the copper pairs
• G.SHDSL Synchronisation tests
• Measurement of G.SHDSL performance
• Comparison with acceptance targets
• ATM / EFM Encapsulation /Bonding
• Up to 4 pairs G.SHDSL /G.SHDSLbis

 

• Full Gigabit bi-directional load testing
• Additional Ethernet troubleshooting capabilities
• Wiremapping by pin as well as pair
• Reporting of test results
• Load test through hubs and switches

 

• Endpoint LAN testing over copper
• IPv4 , IPv6
• Advanced wiremap including length
• Wiremap for cross-over cables (copper)
• Wiremap for 2 pair copper cables
• Wiremap for industrial cables
• PoE detection
• EDP/CDP/LLDP
• VLAN support
• 802.1x logon
• Optical power indication

 

• Power Meter: 850, 1300/1310, 1490 and 1550 nm measurements
• Light Source: 850 /1300nm (LED) as well as 1310/1550nm (Laser)

 

• VDV II performs standard tests for copper cabling
• Coax, 6Pin (RJ11/12), 8Pin (RJ45) Connectors for Copper Cable Testing
• Wiremap for Miswires, Split Pairs, Shorts and Opens
• Analog Tone Generator
• Voltage Protection
• Shielded Cable Testing
• Single Screen Results

 

• Fast Autotest provides proof of network performance in seconds
• USB port enables rapid transfer of test results to memory stick
• Support for shielded and unshielded twisted pair cable including Cat 5e, Cat 6, Cat 6A and Cat 7 (TIA 568A and 568B wiring schemes)
• Stores up to 5000 tests to accommodate even the largest jobs
• Ability to identify and trace cables with a compatible inductive tone probe

 

• Coax, 6Pin (RJ11/12), 8Pin (RJ45) Connectors for Copper Cable Testing
• Wiremap for Miswires, Split Pairs, Shorts and Opens
• Analog Tone Generator
• Voltage Protection
• Shielded Cable Testing
• Single Screen Results
• Larger 2.9" Display
• Backlight
• Hub Blink
• Cable Length
• Distance to Open

 

• Quad OTDR with 850/1300/1310/1550nm
• Dynamic range [dB] : 24 / 25 / 32 / 30 dB
• Short Attenuatioand Event Dead Zones
• Fast Data Acquisition
• USB port
• Certifying OTDR Option-for tier-2 certification

 

• Suitable for both copper and fibre
• Full Gigabit bi-directional load testing
• Additional Ethernet troubleshooting capabilities
• Wiremapping by pin as well as pair
• Reporting of test results
• Load test through hubs and switches