SLS-50 can transmit digital encrypted signals through tested fiber to OPM-50 which can automatically identify input wavelength and switch to the corresponding test mode. This feature greatly reduces the workload at both ends and avoids potential error. User can select the working wavelength and SLS-50 will automatically toggle between working wavelengths.

Remote Reference Value Setting

SLS-50 can transmit digital-encrypted signal with power parameters through tested fiber to OPM-50 as reference for precise link loss measurement even the two units are far apart.

Compatible with FTTx

SLS-50 can generate highly stable signals at 1310nm, 1490nm, 1550nm and 1625nm wavelength, compliant with Passive Optical Network (PON) and FTTx standards.

Direct LCD Display of Output Power

The power value of SLS-50 output signal can be directly displayed on its LCD screen for easy reference.

Features:

? 6dB adjustable power output range

? Automatic wavelength identification/switch

? Remote reference value setting

? FTTx applicable

? USB power charging

? No warm-up, quick start

? Backlight

? Over 40 hours continuous operation

? Pocketsize, lightweight and easy-to-use

? CE, FCC, FDA certificates

More products SHINEWAY

OPTICAL FIBER CONNECTOR CLEANER SHINEWAY CLN-10/ CLN-20

• Available for SC, FC, ST, etc. connectors
• Suitable for both field use and factory use
• Consistently achieve high quality cleaning without alcohol or other solvents
• Cleaning tape is replaceable, thus reducing long-term cost
• One cleaning tape can be used for over 600 wipes/reel

MULTI-WAVELENGTH LASER SOURCE SHINEWAY MLS-20

• Multi-wavelength selectable: 650/850/1300/1310/1490/1550/1625 nm
• 650 nm visible laser source for break and macrobend detection
• Modulation in CW and modulated frequencies
• Modulation frequencies in 270,1K, 2KHz (1Hz@650nm)
• 1625nm laser source with optical power meter to measure upper limit loss in DWDM

OPTICAL FIBER FUSION SPLICER SHINEWAY OFS-60

• 5" Turn-over TFT LCD screen for clear display
• Both X and Y axis display
• Fiber core can be display clearly
• 11seconds splice time and 30seconds heat time
• Portable design for field and Laboratory
• Simple Operation menu

SHINEWAY 95S FUSION SPLICER

• Auto and manual splicing
• Splicing=9s, heating=25s(time and power adjustable)
• Arc counter prompts electrode change upon usage
• Auto arc optimization

OPTICAL FIBER CONNECTOR INSPECTOR SHINEWAY OCI-20B

• Compatible with various connectors
• Dual channel video input (microscope) for easy viewing of male/female connectors
• Extended display on external monitor
• Audio & video recording
• Multimedia playback
• Direct read/write flash disk
• Large storage: 128MB internal memory, SD card up to 16GB
• Data transfer via USB2.0

SDH/PDH/STM/E1 DATA TRANSMISSION ANALYZER SHINEWAY DTA-SDH/155

• Analysis and evaluation of SDH and PDH networks andequipment up to 155Mbps.
• According to ITU.T G.821, G.826, G.828,G.829, M.2100, M.2101.
• Tandem Connection Monitoring (TCM) and APid tests.
• Support pointer adjustment test.
• Automatic Protection Switching (APS).
• Round trip delay measurement (STM-1 and E1).

DATA COMMUNICATIONS/BERT/ E1/ JITTER/ G.703/ PCM ANALYZER SHINEWAY DTA-BERT

• In/Out band & ITU-T V.54 BERT histogram analysis
• DSO control loop codes (Optional)
• Large TFT color LCD display
• Internal memory for test data storage
• Test report
• Print via Parallel/RS-232 port (Optional

OPTICAL FIBER LOSS TESTER WITH INTEGRATED POWER METER AND LASER SOURCE SHINEWAY OTL-20/ OTM-20

• Support quick test, intelligentized operation
• Graphic interface, large easy to read LCD display
• Measurement units in dB, dBm and W (or mW)
• Large memory capacity (4000 measurements)
• Interchangeable fiber-optic adapters (FC, SC, ST, P/N, E 2000)
• RS-232 data upload port

OPTICAL FIBER INSTALLATION, SERVICE, MAINTENANCE TOOL KITS SHINEWAY FTTX TESTPRO

• FTTx TestPro TK-FTP-102 Installation Stage-Enhanced Tool Kit
• FTTx TestPro TK-FTP-202 Service Activation Stage-Enhanced Tool Kit
• FTTx TestPro TK-FTP-302 Maintenance Stage-Enhanced Tool Kit

GIGABIT/BER ETHERNET TESTER SHINEWAY GET-100

• Electrical and optical ports with rate at 10/100/1000Mbps
• Ergonomic, creative design, and easy to carry
• IEEE 802.3, RFC1242, RFC2544 compliant
• L1/L2/L3 BER Test
• Full RFC2544 benchmark test
• Support VLAN test function
• Jitter Test