Environment Resistance

• Compact & rugged body resistant to shock and drop
• IP41 for measurement at dusty and humid conditions
• Continuous measurement in high vibration environments such as Automotive driving tests
• Weather resistance enables measuring in severe temperature conditions -20ºC to + 60ºC (-4°F to + 140°F)

Measurement Capability

• Three measuring modes: Real-time (printing), Memory (transients) and Filing (SD card storage)
• Memory recording for fast 1MS/s data sampling
• Recording to a SD card for long-term measuring
• Print measured data on an external Thermal Printer*

Signal input up to 8 channels

• 4 or 8-ch Voltage & Temperature & 8-point Logic signals

Excellent Portability

• Long term continuous operation from internal batteries. Also power from AC, Vehicle Power, & 8.5VDC to 24VDC
• Light weight (approx. 1.5kg, 3.3lb) and feature packed with powerful measurement capabilities

Excellent Operability & Visibility

• 7" wide color LCD for dynamic waveform display
• Touch-panel screen for easy operation like RA2300

Compact & Rugged body is resistant to Shock and Drop

Small, light-weight instruments are subject to being dropped during transportation, falls from work tables, and during field use. For this reason, the RM1100 was powered operational and drop tested from one (1) meter onto a flat metal plate that indicates dropping once with impact on any plane (6 planes), corner (8 corners) or edge (12 edges) remains continuous performance under tough handling conditions and the heavy-duty design*.

Strong Vibration Resistance is Ideal for Automotive On-road Testing

RM1100 is compliant with U.S. standard MIL-STD-810G 514.5C-1 that is often required for vehicle driving tests and　other heavy vibration environments.

IP41 for measurement in dusty and humid conditions

The RM1100 was tested to comply with the IEC60529 standard and has high level of protection against human body parts (fingers, etc.), solids <1mm and liquids (IP41). An optional Splash-resistant Cover (Model RM11-402) protects input terminals and power connector from dust and water-splash allowing RM1100 use in dust, iron powder, and hydraulic machine environments.

Measurements in Severe Temperatures from -20ºC to + 60ºC (-4°F to + 140°F)

With the RM1100 extended operating temperature range it is possible to measure thermostatic ovens, cold storage warehouses, in close proximity to industrial furnaces, perform vehicle driving measurements in the cold of winter or heat of the desert. For automobile driving tests the RM1100 is easily mounted in-vehicle and data acquired immediately upon starting the engine.

Excellent Operability & Visibility

• Dynamic waveform is displayed on 7" wide LCD display
• Touch panel makes excellent operability realize

Isolated Temperature/Voltage Input (8-ch)

• Max of 8 channels can be measured at fast sampling rate (Temp, voltage, etc.)
  RM1101 : 4 channels (temp and voltage) + 4 (logic)
  RM1102 : 8 channels (temp and voltage) + 4 (logic)

For temperature data, exclusive M3 screw terminals allow easy attachment/removal of thermocouples.

NEC RM1101 Standard configuration:

• Basic unit with 4 analog inputs for voltage and thermocouples and 4 digital inputs
• RS232 and LAN interface
• TFT touch-screen color display
• SD slot for storage card.
• Incl. AC adaptor
• Manual
• PC software NS41-101 Unifizer LE for Win Vista/XP/7 (32 Bit)

• Voltage inputs: galv. isolated, isol. BNC, input ranges ±100 mV to ±500 V, LP filter, bandwidth 400 kHz, 14 Bit/1 MS/s ADC, incl. XLAM-ASF cable.

• Thermocouple inputs: galv. isolated, 3 mm screw connectors, type R, T, J, K or W, LP filter, bandwidth 50 kHz, 14 Bit/1 MS/s ADC.

• Digital inputs: isolated against chassis but not between each other, Mini DIN connectors, per channel selectable for voltage input and contact closure, sampling rate max. 1 MS/s

NEC RM1102 Standard configuration:

Basic unit as above, but each 8 analog and digital inputs.

Batteries and Accessories

NEC RM11-BPM Rechargeable Lithium-Ion battery pack.

For basic unit RM1101/1102 (each 2 batteries needed)

NEC RM11-BCM Battery charger. For RM11-BPM (necessary; no charging provided by the basic unit).

Thermal Printer and Accessories

• NEC RM11-440 Thermal printer, incl. AC adaptor, manual, printer cable, 1 roll of recording paper YPS118
• NEC RM11-BPP Rechargeable Lithium-Ion battery pack. For thermal printer RM11-440 (each 1 needed)
• NEC RM11-BCP Battery charger. For RM11-BPP (not needed; charging provided by the thermal printer)
• NEC YPS118 Recording paper in roll form, width 112 mm, length 25 m, 1 set with 10 rolls
• NEC 0311-5335 Spare printer cable

Transport cases

NEC RM11-403 Plastic case for basic unit, thermal printer and accessories

Storage Media

NEC SDC-4GB SD storage card 4 GB

NEC SDC-8GB SD storage card 8 GB

Signal Connection

• NEC XLAM-ASF Signal cable 160 cm with 4 mm safety connectors
• NEC XM-BB Adaptor, isol. BNC plug to 4 mm sockets
• NEC Teiler BNC Plug-on voltage divider 10:1, accuracy 0.1%, for max. 1 kV, isol. BNC input/output
• NEC Shunt BNC Plug-on shunt 50 W, accuracy 0.2%, for typ. 20/max. 50 mA, isol. BNC input/output
• NEC i410 Clamp current meter, 1-400 A AC/DC, 1 mV/A, 3,5% +0,5A, 3 kHz, up to 30 mm, BNC
• NEC i1010 Clamp current meter, 1-600 A AC/DC, 1 mV/A, 2% +0,5A, 10 kHz, up to 30 mm, BNC
• NEC 0311-5332 Basic digital signal cable without clips, for 4 channels
• NEC 0311-5337 IC clips for basic digital signal cable 0311-5332, for 4 channels
• NEC 0311-5336 Alligator clips for basic digital signal cable 0311-5332, for 4 channels
• NEC TTL Box4 Connection box with 4 mm safety sockets (if required 2 mm or BNC) and voltage dividers for levels H12...32V, L<6V. For RM1101 (4 channels).
• NEC TTL Box8 Connection box with 4 mm safety sockets (if required 2 mm or BNC) and voltage dividers for levels H12...32V, L<6V. For RM1102 (8 channels).
• NEC 1539S Logic probe for connection of digital signals up to 250 V AC/DC, galvanically isolating, for 4 channels

Accessories

NEC RM11-402 Dust and splash protection for signal and power connectors, for 4 channels

NEC RM11-405 Adaptor for mounting a RM1100 on a tripod stand or rotary display arm (VESA standard)