High performance measuring instrument for electrical safety testing of portable appliances, IT equipment and IEC cords in accordance with corresponding IEC/EN and VDE standards

MEASURING FUNCTIONS

Complete selection of test functions and lightweight design make AlphaPAT as excellent tool for periodic testing of portable appliances either as field tester or as a bench instrument.

Test functions comprise:

Functional and visual inspection;
Earth bond resistance;
Insulation resistance;
Substitute leakage current;
Differential leakage current test;
Touch leakage test;
IEC cord polarity test;
Power test;
Clamp current test.

OTHER FEATURES

Graphic LCD with resolution of 128 x 64 dots, with backlight.
The graphic display offers easy reading of results, indications, measurement parameters and messages.
Large data flash memory for storing test results & parameters (about 1100 tests with parameters can be stored in average).
Two RS232C communication ports for communication with PC, and barcode reader.
Built-in real time clock.
Bar-coding system for quick test code selection and identification of device under test.
Programmable limits for PASS / FAIL evaluation.
Fully compatible with new Metrel PATLink PRO PC software package, included in standard set (download, view, print and export of test results).
Optional PC SW PATLink PRO Plus (advanced test result analysis and professional test report creation)
Portable and lightweight design.

TECHNICAL DATA

Dimensions (w x h x l): 265 x 110 x 185 mm

Mass (without accessories): 3.5 kg

Standard accessories

MI 2142 Standard set MI 2142

Instrument MI 2142 AlphaPAT
Carrying bag
Continuity / Leakage cable
PC software PATLink PRO
RS232 cable
Instruction manual
Calibration certificate

More products METREL

1000V VOLTMETER METREL MD1150

• Voltage testing up to 1000 V
• Automatic AC/DC recognition
• Continuity testing up to 2000 ?
• Phase & Rotating Field Test RCD fault test
• Diode Test
• Auto Power Off
• Data Hold
• LCD display with backlight

METREL MI3250 PRECISION RESISTANCE MICROOHMMETER 10A

• Bidirectional resistance measurement from 0,1 µO up to 2000 O
• test current up to 10 A
• Highly efficient 10 A current source generates 10 A into 200 mO load for 15 min without overheating
• High overvoltage protection (CAT IV / 300 V)
• Custom limits can be set for PASS / FAIL evaluation of test result.
• 50 Hz / 60 Hz ripple detection and rejection.
• Instrument can be powered from mains or internal rechargeable battery.
• Up to 1000 test results with timestamp can be stored in internal memory.
• PC SW HVLink PRO enables downloading, review, analyses and printing of test results.

RESIDENTIAL ELECTRICAL INSTALLATION SIMULATOR METREL MI 2166 DEMO

• Simulation of common electrical installation usually met in an individual house or apartment
• Various test methods supported by different test instruments can be presented.
• Acceptable or faulty parameters can be preset by five »fault� switches.
• Some real elements of electrical installation are placed on the front panel like RCD protection device, ON/OFF switch

METREL MI2086 EUROTEST 61557 ELECTRICAL INSTALLATION TESTER

• DC insulation resistance with test voltages up to 1000V
• PE conductor continuity test
• Loop and Line impedance also without RCD triggering
• RCD test
• Illumination
• Phase sequence in 3-phase systems
• Measurements on earthling and lightning systems with included 2-clamp method (without junctions disassembling).
• Electrical power and consumption measurement,
• current and voltage harmonics measurement,
• phase angle

METREL MI2088 EARTH INSULATION TESTER

• Measurements on earthing and lightning protection systems include: standard 4-wire method, standard 4-wire method with current clamps and 2-clamp method without junctions disassembling.
• Specific earth resistance (soil resistance).
• DC insulation resistance measurement with test voltages from 50 V up to 1000 V in 10 V steps. Measuring range up to 30 GOhm.

METREL MI3110 ELECTRICAL INSTALLATIONS TESTER FOR IT EARTHING SYSTEMS EUROTEST IM MI-3110

• IT System recognizing, Voltage Range and Voltage Balance;
• ISFL Single Fault Leakage current from Phase 1 and Phase 2 to PE;
• Fuse Trip-out Ability Evaluation, Line Impedance and Ipsc Prospective Short Circuit Current;
• IMD Insulation / ELM Earth Leakage / RCM Residual Current Monitor Devices Control;
• Alarm Trigger or Trip-Out Check and Adjust.

METREL MI3125 ELECTRICAL INSTALLATION TESTER EUROTEST COMBO

• TRMS voltage and frequency
• Continuity
• Insulation resistance
• RCD testing (type AC and A)
• Fault loop / RCD Trip Lock impedance
• Line impedance
• Phase sequence

METREL MD9015 ELECTRICIAN HANDHELD MULTIMETER MD-9015

• 1000V DC, 750V AC voltage measurement;
• 10A AC, DC current measurement;
• 250O..25MO Resistance measurement;
• 2500nF..25mF Capacitance measurement;
• 30Hz..200kHz Frequency Measurement
• Temperature measurement

LOW CURRENT LEAKAGE CLAMP METER METREL MD 9270

• TRMS AC voltage and current measurement.
• Frequency measurement.
• Power: measures various power parameters (active, reactive, apparent power, THD, PF, phase displacement).
• Intelligent loss analysis: complex algorithms detect loss and allow determining possible reasons for current loss.
• Harmonics: measures current or voltage harmonic components and a percentage value of a harmonic up to the 49th.
• Total Harmonic Distortion (THD)
• Power Factor (PF).

WINDING TRANSFORMER RESISTANCE MICROOHMMETER 2A METREL MI 3242

• Bidirectional resistance measurement from 1 µO up to 199,9 O
• test current up to 2 A
• High overvoltage protection (CAT III / 600 V)
• Internal protection cicuit
• 50 Hz / 60 Hz ripple detection and rejection.
• more than 800 measurements of 500 mO load 8 2 A test current & 15 s measurement duration
• Pre-programmed limits with PASS/FAIL evaluation of measurement result
• Up to 1500 test results with timestamp can be stored in internal memory.
• PC SW HVLink PRO enables downloading, review, analyses and printing of test results.