136-channel portable logic analyzer
4 GHz (250 ps) timing zoom with 64 K memory
1.0 GHz / 500 MHz (half / full-channel) conventional timing with deep memory
500 MHz transitional timing
up to 450 MHz State clock rates
up to 500 Mb/s Data rates
up to 32 M acquisition memory depth
15-inch (38.1 cm) color display with touch screen available(option 103)
Comprehensive single-ended signal support, threshold is adjustable in -5 V to 5 V (10 mV increments)
Automated threshold/sample position setup for accurate measurements on high-speed buses
Simultaneous eye diagrams on all channels identify problem signals quickly
Selectable memory depths: 1 M, 4 M, 16 M, 32 M

Recommended options

16800A-0B3	Service Manual
16800A-103	Front Panel with 15 inch display and touchscreen
16800A-109	External removable hard drive for 16800 series logic analyzers
16804A-001	Standard 1 M acquisition memory depth
16804A-004	Increase acquisition memory depth to 4M
16804A-016	Increase acquisition memory depth to 16M
16804A-032	Increase acquisition memory depth to 32M
16804A-500	Increase maximum state speed to 500 Mb/s
16804A-A6J	ANSI Z540 Compliant Calibration
E5346A	Probe, 34 channel single-ended Mictor connector, connects to 40-pin LA cable
E5383A	Probe, 17-channel single-ended flying leads, connects to 40-pin LA cable
E5385A	Probe, 34 channel single-ended Samtec connector, connects to 40-pin LA cable
E5394A	Probe, 34 channel single-ended soft touch connectorless, connects to 40-pin LA cable
E5394A-001	Retention Module
E5396A	Probe, 17 channel single-ended soft touch connectorless, connects to 40-pin LA cable
E5396A-001	Retention Modules
E5403A	Kit of 5 retention modules for Pro Series Soft Touch Connectorless Probes
E5404A	Probe, 34 channel, soft touch pro, single-ended, connects to 40-pin LA cable

More products KEYSIGHT

MULTIPLEXER MODULE 40 CHANNELS AGILENT 34921A

• 40 2-wire channels
• 300V, 1A switch; 2A carry current
• 100 ch/s scanning
• Mix 2- or 4-wire configurations
• 45 MHz Bandwidth

DIGITAL OSCILLOSCOPE 2 X 100 MHZ AND LOGIC ANALYZER 8 CHANNELS AGILENT MSOX2012A

• 100 MHz bandwidth
• 2 analog channels plus 8 digital channels
• 1GSa/s per channel sample rate

AGILENT N9344C HSA HANDHELD SPECTRUM ANALYZER 9 KHZ/ 1MHZ..20 GHZ

• 1 MHz to 20 GHz Frequency range(tunable to 9 kHz)
• 10 Hz to 3 MHz RBW
• 1 Hz to 3 MHz VBW

PXI MICROWAVE SWITCH MODULE DC-26.5GHZ AGILENT M9155C

• Hybrid Dual SPDT Coaxial Switch Unterminated
• Broadband from DC to 26.5 GHz
• Unmatched isolation 92 dB at 8 GHz
• Long life cycles - 5 million cycles guaranteed, 10 million cycles typical

PXI RF MATRIX SWITCH 3GHZ 1 X 8, 75 OHM AGILENT M9152A

• RF signal routing to 3 GHz for 75 ohm applications
• 1x8 75 ohm RF switch multiplexer to 3GHz
• 30V, 1A, 10W switching
• 75 ohm input impedance
• 52 dB isolation at 1 GHz

AGILENT U1732A U1732B HANDHELD LCR METER 100 HZ..10 KHZ

• 20,000 counts resolution with dual display
• 100 Hz / 120 Hz / 1 kHz / 10 kHz test frequencies
• inductance, capacitance and resistance measurements
• Backlight
• Auto-calculation of Phase Angle
• Dissipation and Quality Factors

AGILENT N5182A MXG VECTOR SIGNAL GENERATOR 100 KHZ..3 GHZ/ 6 GHZ

• 100 kHz to 3 GHz or 6 GHz
• 0.01 Hz resolution
• >+23 dBm up to 3 GHz using a highly-reliable, fast-switching electronic attenuator
• 100 MHz internal I/Q baseband generator
• Up to 64 MSa playback memory and 800 MSa storage

USB THERMOCOUPLE INPUT MODULE 31-CHANNELS AGILENT U2802A

• Up to 31 thermocouple inputs
• Configurable for thermocouple or voltage input mode independently
• Voltage input range up to 10V
• Supports thermocouple type J, K, R, S, T, N, E and B

MULTIPLEXER MODULE QUAD 4-CHANNELS 50 OHM AGILENT 34941A

• Quad 4-channel multiplexers
• DC to 3 GHz, 50 Ohm
• High isolation, low VSWR
• 30V, 0.5A, 10W switching
• SMA connectors

MULTIPLEXER MODULE 20 CHANNELS AGILENT 34901A

• 20 Channel Multiplexer
• Two- and four-wire scanning
• 300 V switching
• 60 ch/s scanning
• Built-in thermocouple reference junction