Agilent E8257D PSG Microwave Analog Signal Generator 250 kHz..20 GHz/ 31.8 GHz/ 40 GHz/ 50 GHz/ 67 GHz

Code: Agilent E8257D PSG


 

Datasheet PDF, 3.64 Mb

Description

  • 250 kHz to 20 GHz, 31.8 GHz, 40 GHz, 50 GHz or 67 GHz operational to 70 GHz
  • 0.001 Hz resolution
  • +23 dBm @ 20 GHz, +17dBm @ 40 GHz, +14 dBm @ 67 GHz output power (typ); > +30 dBm (typ) with Option 521.
  • AM, FM, ØM, pulse, and scan
  • Extendable to 75, 90, 110, 140, 170, 220, 325, or 500 GHz - Millimeter-wave source modules
  • Industry’s best SSB phase noise Option UNY.
  • 8 ns rise/fall times and 20 ns pulse width (typ)
  • Dual internal function generators: sine, square, triangular, ramp, and noise
  • Step, list, and ramp sweep (frequency and power)
  • Source control using PSA Series Option 215
  • Agilent 8757D scalar network analyzer code compatible
  • 10BaseT LAN and GPIB
  • SCPI and IVI-COM drivers
  • Backwards compatible with all PSG signal generators
 

Recommended options

  • Option 520  250 kHz to 20 GHz
  • Option 521  10 MHz to 20 GHz
  • Option 532  250 kHz to 31.8 GHz
  • Option 540  250 kHz to 40 GHz
  • Option 550  250 kHz to 50 GHz
  • Option 567  250 kHz to 67 GHz  (operational up to 70 GHz)
 

More products KEYSIGHT

AGILENT 53230A RF UNIVERSAL FREQUENCY COUNTER 12 DIGIT 2 CH 350 MHZ

• 2 x 350 MHz baseband frequency
• 12 digits/sec resolution
• 6 or 15 GHz optional microwave channels
• 20 ps single-shot time resolution

 

AGILENT N9000A CXA SIGNAL SPECTRUM ANALYZER 9 KHZ..3 GHZ OR 7.5 GHZ

• 9 kHz to 3.0 or 7.5 GHz Frequency range
• 10 MHz (standard), 25 MHz (optional) analysis bandwidth
• Basic EMI precompliance measurement capability available
• Standards-based PowerSuite: channel power, OBW, ACP, CCDF, SEM

 

PXI SWITCH MATRIX 4 X 32 100V/2A AGILENT M9120A

• Connect multiple instruments to multiple points for automated test applications
• 4x32 high-power, 2-wire matrix
• 100Vrms
• 2A switch/carry current
• 60W max power
• Durable 60W armature switches

 

AGILENT E3631A E3632A E3633A E3634A DC PROGRAMMABLE POWER SUPPLIES 80-200W

• Single and triple output
• 80 W to 200 W output power
• Low noise and excellent regulation
• GPIB and RS-232 standard

 

AGILENT N3300A N3301A N3302A N3303A N3304A N3305A N3306A N3307ADC ELECTRONIC LOADS

• 6 Slots - Full Rack Width Mainframe(N3300A Mainframe)
• 1800 Watts of Total Maximum Power(N3300A Mainframe)
• 2 Slots - Half Rack Width Mainframe(N3301A Mainframe)
• 600 Watts of Total Maximum Power(N3301A Mainframe)
• 
• 6 Modules available for configuring (150W to 600W)
• Max Voltage Input: 240V (N3303A)
• Max Current Input: 120A (N3306A)

 

PXI RF MATRIX SWITCH 3GHZ QUAD 1 X 4, 75 OHM AGILENT M9151A

• RF signal routing to 3 GHz for 75 ohm applications
• Quad 1x4 75 ohm RF switch multiplexer to 3GHz
• 30V, 1A, 10W switching
• 75 ohm input impedance
• 43 dB isolation at 1 GHz

 

PXI RF MATRIX SWITCH 3GHZ DUAL 1 X 4, 50 OHM AGILENT M9146A

• RF switching to 3 GHz
• Dual 1x4 50 ohm RF switch multiplexer to 3GHz
• Off channel termination
• 30V, 1A, 1W switching
• 60 dB isolation at 1 GHz

 

AGILENT 81110A 81111A PULSE GENERATOR 165 MHZ

• 1 mHz to 165 MHz
• 1 or 2 Channels(order 2 x 81111A modules)
• 2 ns to 200 ms variable transition time
• Up to 10 Vpp into 50 O (20 Vpp into open circuit)

 

AGILENT U8001A U8002A DC POWER SUPPLY 90/150W

• Excellent regulation (0.01% + 2mV; 0.02% + 2mA)
• Fast 50µsec transient response
• Low output noise of 1mVrms and 3mArms from 20Hz to 20MHz

 

AGILENT 33250A FUNCTION / ARBITRARY WAVEFORM GENERATOR 80 MHZ

• 80 MHz sine and square waveforms
• 12-bit, 200 MSa/s, 64 Kpoint arbitrary waveforms
• 50 MHz pulse waveforms with variable rise/fall times
• Ramp, triangle, noise, DC and other waveforms