Agilent 16802A Portable Logic Analyzer 68 channels

Code: Agilent 16802A


 

Datasheet PDF, 1.09 Mb

Description

  • 68-channel portable logic analyzer
  • 4 GHz (250 ps) timing zoom with 64 K memory
  • 1.0 GHz / 500 MHz (half / full-channel) conventional timing with deep memory
  • 500 MHz transitional timing
  • up to 450 MHz State clock rates
  • up to 500 Mb/s Data rates
  • up to 32 M acquisition memory depth
  • 15-inch (38.1 cm) color display with touch screen available(option 103)
  • Comprehensive single-ended signal support, threshold is adjustable in -5 V to 5 V (10 mV increments)
  • Automated threshold/sample position setup for accurate measurements on high-speed buses
  • Simultaneous eye diagrams on all channels identify problem signals quickly
  • Selectable memory depths: 1 M, 4 M, 16 M, 32 M
 

Recommended options

16800A-0B3

Service Manual

16800A-103

Front Panel with 15 inch display and touchscreen

16800A-109

External removable hard drive for 16800 series logic analyzers

16802A-001

Standard 1 M acquisition memory depth

16802A-004

Increase acquisition memory depth to 4M

16802A-016

Increase acquisition memory depth to 16M

16802A-032

Increase acquisition memory depth to 32M

16802A-500

Increase maximum state speed to 500 Mb/s

16802A-A6J

ANSI Z540 Compliant Calibration

E5346A

Probe, 34 channel single-ended Mictor connector, connects to 40-pin LA cable

E5383A

Probe, 17-channel single-ended flying leads, connects to 40-pin LA cable

E5385A

Probe, 34 channel single-ended Samtec connector, connects to 40-pin LA cable

E5394A

Probe, 34 channel single-ended soft touch connectorless, connects to 40-pin LA cable

E5394A-001

Retention Module

E5396A

Probe, 17 channel single-ended soft touch connectorless, connects to 40-pin LA cable

E5396A-001

Retention Modules

E5403A

Kit of 5 retention modules for Pro Series Soft Touch Connectorless Probes

E5404A

Probe, 34 channel, soft touch pro, single-ended, connects to 40-pin LA cable

 

More products KEITHLEY

AGILENT N9030A PXA SIGNAL SPECTRUM ANALYZER 3 HZ..3.6 / 8.4 / 13.6 / 26.5 GHZ

• 3 Hz to 3.6, 8.4, 13.6, or 26.5 GHz
• 10 MHz (standard), 25, 40, or 140 MHz analysis bandwidth
• Basic EMI precompliance measurement capability available
• Advanced analysis of more than 70 signal formats

 

MICROWAVE SWITCH TRIPLE MODULE AGILENT 34947A

• Three SPDT unterminated switches
• 4 GHz, 20 GHz or 26.6 GHz options
• High isolation loss, low VSWR
• Up to 50W switching

 

AGILENT 6811B AC POWER SOURCE & ANALYZER 375VA

• Power: 375 VA
• Voltage rms: 300 V
• Current rms: 3.25 A
• Repetitive & non-repetitive peak current: 40 A

 

PXI MULTIPLEXER MODULE 128-CHANNELS 100V/1A AGILENT M9102A

• 128-channel, high-density 1-wire switch multiplexer
• 100Vrms
• 0.5A/1.0A switch/carry current
• 10W max power
• High-speed 500 usec reed relays

 

AGILENT 81160A PULSE FUNCTION ARBITRARY NOISE GENERATOR 500 MHZ

• 1 µHz - 330 MHz pulse generation with variable rise/fall time
• 1 µHz - 500 MHz sine waveform output
• 14-bit, 2.5 GSa/s arbitrary waveforms
• 1 or 2 channel, coupled and uncoupled

 

AGILENT 81110A 81112A PULSE GENERATOR 330 MHZ

• 1 mHz to 330 MHz
• 1 or 2 Channels(order 2 x 81112A modules)
• 800 ps or 1.6 ns selectable
• Up to 3.8 Vpp into 50 O

 

AGILENT N9340B HSA HANDHELD SPECTRUM ANALYZER 9/100 KHZ..3 GHZ

• 100 kHz to 3 GHz Frequency range(tunable to 9 kHz)
• 30 Hz to 1 MHz RBW
• 3 Hz to 1 MHz VBW

 

DIGITAL OSCILLOSCOPE 2 X 350 MHZ AGILENT DSOX3032A

• 350 MHz bandwidth
• 2 analog channels
• 2 GSa/s per channel sample rate, 4 GSa/s half-channel interleaved mode


MULTIFUNCTION MODULE I/O AGILENT 34907A

• 16 bits of digital input and output
• 100 kHz totalizer input
• Two +/-12V analog outputs

 

CURRENT CLAMP METER TRUE-RMS 1000A AGILENT U1211A

• 1000 A True-RMS AC current measurement
• Small body and large jaw size up to 52mm
• Includes full-featured DMM with resistance, capacitance, frequency, diode check, continuity