GOODWILL INSTEK APS-1102A

Code: GOODWILL INSTEK APS-1102A


 

Datasheet PDF, 4.4 Mb
   

Description

The AC power supply APS-1102A is not only in the role as a precision AC/DC power source but also a powerful analyzer, containing abundant features for the testing and characteristic analysis of power supplies, electronic devices, components and modules. Besides providing AC/DC power, APS-1102A also allows free programming of outputs for the simulation of a power source with abnormal variations. The instantaneous interruption, frequency sweeping, voltage sweeping, and arbitrary waveforms of power source can be easily generated in accordance with the test requirements. The output function includes two main modes, AC and AC + DC. Each mode can be combined with any of the four signal sources, internal (INT), external (EXT), internal + external (ADD), and synchronization, to give an ultimate flexibility of power source setting. APS-1102 includes a multi-functional and user-friendly software, which supports the remote control of panel operations, Sequence editing and execution, Arbitrary waveform editing and transfer, and Data logging via USB interface. With capacity of 1kVA power and weighting of 20 lbs, APS-1102A provides powerful test and analysis features all in a comparatively compact and light-weight box.

 

Features:

  • 5.7" Large LCD Display
  • Output Capacity: 1kVA(for AC 200V Input)
  • Output Modes: AC and AC+DC Combined with any of four signal sources
  • Signal Source: Internal(INT),External(EXT),Internal+External(ADD) and Synchronization(SYNC)
  • Arbitrary Waveform Power Output
  • Power Amplifier of External Signal
  • Measurement Functions: Voltage, Current, Power ,Frequency, Power Factor,CF,and Harmonic Current
  • Capacitor Input Load Supported
  • Sequence Function Allows Programming of Output Patterns
  • Limiter Function ( Upper / Lower / Limit Function)
  • 30 sets of Save / Recall Memory
  • Output On / Off Switch
  • USB(USBTMC)and RS-232 Standard for Remote Control
  • PC Software (Including Data Logging)
 

More products INSTEK

GOODWILL INSTEK GCT-9040

• AC 40A Ground Bond Tester
• Measuring Resistance from 1mO~650mO
• Connect with the GPT-9800/9900 series to become a multifunctional test or simultaneous test system
• 240x64 Ice Blue Dot Matrix LCD
• Function Key for quick selecting

 

ANALOG OSCILLOSCOPE 2 X 100 MHZ GW INSTEK GOS-6103C

• 100 MHz bandwidth, Delayed Sweep
• 2 analog channels
• 10 Sets Memory for Front Panel Setting Save & Recall
• Built-In 6 digits Universal Counter
• Time Base Auto-range
• Cursor Readout with 7 Measurements

 

GOODWILL INSTEK PEL-3000E

• OCP?OPP test Automation
• Max. Slew Rate: 2.5A/us
• Dynamic mode
• Protection: OVP, OCP, OPP, OTP, RVP, UVP
• Remote Sense

 

GW INSTEK GPT-9901A GPT-9902A GPT-9903 GPT-9904 HIPOT WITHSTANDING TESTER

• 500VA AC Test Capacity
• 240x64 Ice Blue Dot matrix LCD
• Sweep Function for DUT characteristic analysis
• Insulation resistance measurement up to 50GO(GPT-9903/9904)
• Manual/Auto Mode
• Interface : RS-232C, USB device, Signal I/O and GPIB (optional)

 

GOODWILL INSTEK LCR-8000G SERIES

• Large LCD Display with Intuitive Interface
• Full Measuring Functions with DUT V/I Monitor
• PASS/FAIL Function ( abs, % or delta) with Judgment Alarm
• DC Resistance Measurement
• Multiple Step Mode

 

GOODWILL INSTEK PSM-SERIES

• Safety design: OVP,OCP & OTP;Output ON/OFF control
• Self-test and software calibration
• Highly visible vacuum-fluorescent display
• Front and rear output terminal

 

GOODWILL INSTEK GDM-8351

• 120,000 counts, VFD display
• Dual measurement/Dual display
• The basic precision of DC voltage: 0.012%
• Selectable measurement speeds, the maximum: 320 Readings/s
• True RMS (AC,AC+DC) measurements

 

GOODWILL INSTEK AFG-200/100 SERIES

• Frequency range: 1uHz~25MHz
• 1uHz frequency resolution
• Built-in 120 MSa/s, 10 bit resolution and arbitrary waveform editing function with 4k point memory
• Dual channel models support coupling, tracking, and phase functions

 

SPECTRUM ANALYZER 9KHZ..3GHZ GW INSTEK GSP-930

• Frequency Range: 9kHz ~ 3GHz
• High Frequency Stability: 25ppb (0.025ppm)
• RBW: 10Hz ~ 10kHz in 1-3 steps, 10kHz ~ 1MHz in 10% adjustable steps
• Phase Noise: -88dBc/Hz @1GHz, 10kHz Offset
• Built-in Measurement Functions: Channel Power, N-dB bandwidth, OCBW, ACPR, SEM, TOI, CNR, CTB, CSO
• Built-in Spectrogram and Topographic Display Modes