Hydraulic Pressure Calibration Pump -90%~ 700 bar ConST182 laboratory pressure generator generating
ROM
ENGPressure Calibrators > CONST (16) > Hydraulic Pressure Calibration Pump -90%~ 700 bar ConST182
- Oscilloscopes
- Multimeters
- Signal Generators
- Spectrum Analyzers
- Universal Frequency Counters
- Power Supplies
- Electronic Loads
- Logic Analyzers
- Data Acquisition Modules
- LCR Analysis & Power Analyzers
- Power Quality Analyzers
- Electrical Installations Testers
- Earth Resistance Ground Testers
- Current Clamp Meters
- Microhmmeters
- Transformers Test
- Hipot High Voltage Testers
- Cable Fault Locators
- Circuit Breaker Analyzers
- Protection Relay Test Systems
- Battery Testers
- Solar Photovoltaic Analyzers
- Cable Network Test
- OTDR & Optical Fiber Test
- Optical Fiber Fusion Splicers
- Wireless Network Analyzers
- RF Powermeters
- TV & Satellite Analyzers
- Video Generators
- Broadcast & TV Distribution
- Antennas
- Signal Amplifiers
- Electromagnetic Field Testers
- Electrostatic Discharge Testers
- EMC & EMI Test
- Anechoic Chambers
- Multifunction Calibrators
- Temperature Calibrators
- Pressure Calibrators
- Electrical Energy Calibration
- LCR Calibration
- Infrared Thermal Cameras
- Environment Testers
- Sound & Vibration Testers
- Gas Analyzers
- Water Leak detectors
- Soldering Rework Stations Tools
- Precision Balances
- Topographic Measurements
- Biomedical Equipments
- Microscopes
- Spectrometers
- Video Inspection Borescopes
- Ultrasound Inspection Systems
- Technical Training Systems
|
|
|
|
Recommended products
Hydraulic Pressure Calibration Pump -90%~ 700 bar ConST182
Code: ConST182
Product Datasheet (*.PDF - 0.44 Mb)Hydraulic pressure pump ConST182
The Model ConST182 Hydraulic Pressure calibration Pump is a dual pressure source with the ability to easily adjust and stabilize. This hand pump possesses both 90% vacuum and positive pressure 10000 psi; uses oil or deionized water as the media, and can adjust the pressure easily and stably.
In order to avoid the enhance pressure seal ability, the ConST182 didn’t use the check valve (non-return valve) but use the helicoidal pump, that makes the ConST182 is very easy for pressurizing and is much better than other pliers hand pumps.
The adjusting resolution is up to 100 Pa (1 mbar). These features make the CONST182 ideal for calibrating pressure transducers, precision pressure gages, and other pressure instruments.
Features
-
Water media
-
Dual pressure ranges
-
User friendly, easy to get 700bar high pressure
-
Minimum leakage and very high pressure stability.
The adjusting resolution is up to 100 Pa (1 mbar). These features make the CONST182 ideal for calibrating pressure transducers, precision pressure gages, and other pressure instruments.
Temperature: (0~50)C
Humidity: < 95%RH
Pressure Resolution: 100Pa/ 1 mbar
Safety pressure: < 105MPa
Pressure media: Deionized water
Material: Ram/adapters: 316 SS;
Body: Steel/aluminum;
Seals: Buna-N.
Dimensions:
Height: 102.36? (260 mm);
Base: 187" (475 mm) x 133.86" (340 mm).
Weight: 35.27 lb (16kg).
PRECAUTIONS
1. Operate the pump in the rated pressure range, do not over the safety pressure (105MPa)
2. Close the valves and tighten the plugs in transportation or hand carrying.
3. Always open the release valve during operation
4. Do not over tighten the connectors or handles to avoid any damage
5. Change the contaminated media immediately
6. Do not let the media level below to the mid line of reservoir, when the pump is placed horizontally.
7. Keep the outer threads clean.
8. Should collect the liquid by using a cup, when the spill valve and release valve is opened,
8. Any security problems or damages caused
Copyright © 2010 - 2024 / Distek