Analog Oscilloscope 2 x 30 MHz GW Instek GOS-6031

Code: Godwill Instek GOS-6031


 

Datasheet PDF, 0.2 Mb

Description

  • 30 MHz bandwidth
  • 2 analog channels
  • 1mV/div ~ 20V/div
  • Cursor Measurement, 6 Digit Frequency Counter, 10 sets Memory for Front Panel Setting Save & Recall
  • CRT Readout
  • ALT, MAG Function (x 5, x 10, x 20)
  • Vertical Mode Triggering
  • TV Synchronization
  • Buzzer Alarm & LED Indicators
 

Standard accessories

  • User manual x 1
  • Power cord x 1
  • GTP-060A-4: 60MHz (10:1/1:1) Switchable Passive Probe (one per channel)
 

Recommended options

  • GTL-110  Test lead, BNC-BNC heads
  • GTC-001  Instrument cart, 450(W) x 430(D)mm (120V input socket)
  • GTC-002  Instrument cart, 330(W) x 430(D)mm (120V input socket)
 

More products GW INSTEK

GOODWILL INSTEK PPS-3635

• 100 Sets of Memory
• Self Test and Software Calibration
• Meets UL CSA IEC Safety Regulation
• Auto Step Running With Time Setting

 


GOODWILL INSTEK GAG-810 & GAG-809

• Frequency from 10Hz ~ 1MHz
• 0.02% Low Sine Wave Distortion (GAG-810 Only)
• 6 Steps Output Attenuator
• EXT SYNC Function

 

GOODWILL INSTEK GUT-6000B

• Loop Test
• Auto-Search
• Self-Diagnosis
• Over-Load Protection

 


GOODWILL INSTEK SPD-3606

• Remote output on/off control
• OVP to protect the DUT
• OTP to protect SPD-3606 to decreas the repair rate
• Compact size, light weight

 

GW INSTEK GPT-9901A GPT-9902A GPT-9903 GPT-9904 HIPOT WITHSTANDING TESTER

• 500VA AC Test Capacity
• 240x64 Ice Blue Dot matrix LCD
• Sweep Function for DUT characteristic analysis
• Insulation resistance measurement up to 50GO(GPT-9903/9904)
• Manual/Auto Mode
• Interface : RS-232C, USB device, Signal I/O and GPIB (optional)

 

GOODWILL INSTEK GDM-8034

• 8 Functions AC/DC Voltage, AC/DC Current, Resistance, Capacitance, Diode Test and Audible Continuity Beeper
• High Voltage 1000V and 20A Current Range
• 0.5% Basic DCV Accuracy
• LCD Display

 

GOODWILL INSTEK APS-1102A

• Arbitrary Waveform Power Output
• Power Amplifier of External Signal
• Measurement Functions: Voltage, Current, Power ,Frequency, Power Factor,CF,and Harmonic Current
• Capacitor Input Load Supported

 

ANALOG SPECTRUM ANALYZER 150KHZ..1GHZ INSTEK GSP-810

• Frequency Range: 150kHz ~1GHz
• Fully Digital Phase Locked Loop Technique Design
• High Frequency Stability:±10ppm
• RBW : 3K, 30k, 220k, 4MHz
• High Input Protection Level : +30dBm,±25VDC
• Reference Level Range : -30dBm~ +20dBm
• Two Markers for Absolute and Relative Measurement
• Support standard RS-232C Interface to connect with PC
• Options: Tracking Generator, Power Meter, Remote Control Software