Fluke 434 II Three Phase Power Quality Analyzer

Code: Fluke 434-II 434II


 

Datasheet PDF, 0.82 Mb
     

Description

  • Energy loss calculator: Classic active and reactive power measurements, unbalance and harmonic power, are quantified to pinpoint the fiscal costs of energy losses.
  • Troubleshoot real-time: Analyze the trends using the cursors and zoom tools.
  • Highest safety rating in the industry: 600 V CAT IV/1000 V CAT III rated for use at the service entrance.
  • Measure all three phases and neutral: With included four flexible current probes with enhanced thin flex design to fit into the tightest places.
  • Automatic Trending: Every measurement is always automatically recorded, without any set-up.
  • System-Monitor: Ten power quality parameters on one screen according to EN50160 power quality standard.
  • Logger function: Configure for any test condition with memory for up to 600 parameters at user defined intervals.
  • View graphs and generate reports: With included analysis software.
  • Battery life: Seven hours operating time per charge on Li-ion battery pack.
 

Standard accessories

  • BC430 Power Adapter
  • International plug adapter set
  • BP290 (Single capacity Li-ion battery) 28 Wh (8 hours or more)
  • TLS430 Test lead and Alligator clip set
  • WC100 color coding clips and regional decals
  • i430flex-TF, 24 inch (61 cm) length, 4 flexible current probes
  • 8 GB SD card
  • PowerLog on CD (includes operator manuals in PDF format)
  • USB cable A - Mini B
  • C1740 Soft Case
 

Recommended options

Clips

AC285

AC285 SureGrip™ Alligator Clip Set

 

Batteries, Chargers and Adapters

BP290

2400 mAh Li-ion battery for Fluke 190-series II

BP291

4800 mAh High capacity Li-ion battery ) for Fluke 190-seriesII

BC430

BC430 Line Voltage Adapter/Battery Charger

EBC290

EBC290 External Battery Charger, charges BP291 while outside instrument

 

Cables and Hardware

GPS430

GPS430 Time Synchronization Module

 

Current clamps

90i-610s

90i-610s AC/DC Current Probe (600 A)

i30s

Fluke i30s AC/DC Current Clamp

i1000s

i1000s AC Current Clamp (1000 A)

i200s

i200s AC Current Clamp

i3000s

i3000s AC Current Clamp

i400s

i400s AC Current Clamp

i5sPQ3

i5sPQ3 AC Current Clamp, 3-pack

 

Options

HH290

Hanging Hook for ScopeMeter 190-Series II

 

Test Leads

TLS430

TLS430 Test Leads and Alligator Clips set

WC100

WC100 Color Localization Set

 

More products FLUKE

FLUKE 1652C MULTIFUNCTION INSTALLATION TESTER 250V-1000V

• Test voltage: 250V, 500V, 1000V
• Two measurements at once and a dual display
• PEFC/PSC and loop impedance
• Fast voltage measurement between L-N, L-PE and N-PE
• PASS/FAIL indication for RCD test results

 

FLUKE 117 HANDHELD DIGITAL MULTIMETER ELECTRICIAN 3.5 DIGIT

• 3.5 digit
• 6000 count
• 0.5% accuracy
• VoltAlert™ technology for non-contact voltage detection
• AutoVolt automatic ac/dc voltage selection

 

CURRENT CLAMP METER AC/DC TRUE-RMS 2000 A FLUKE 353

• 2000 A AC + DC true-rms, 1400 A AC, and 2000 A DC
• large 58 mm (2.3 in) jaw capacity
• Accurately measure frequency up to 1 kHz

 

HANDHELD LOOP CALIBRATOR FLUKE 707EX

• 0 to 28 V DC Voltage measure
• 0 to 24 mA Current measure
• 0 to 20 mA Current source / simulate
• mA accuracy of 0.015%
• For use in explosion endangered areas ATEX certifed ( II 2 G Eex ia IIC T4)

 

INDUSTRIAL MAINTENANCE SYSTEM FLUKE CNX 3000 GM

• • True-RMS AC and DC voltage measurements to 1000V
• • True-RMS AC and DC current with 0.01 mA resolution
• • True-RMS AC voltage measurements to 1000V
• • True-RMS AC current measurements to 2500 A


FLUKE 233 HANDHELD DIGITAL MULTIMETER 3.5 DIGIT

• 3.5 digit
• 6000 count
• 0.25% accuracy
• Remote Display
• Measure up to 1000 V ac and dc
• Measure up to 10 A (20 A for 30 seconds)
• 10,000 µF capacitance range
• Frequency to 50 kHz
• True-rms ac voltage and current for accurate measurements on non-linear signals

 

AIR QUALITY PARTICLE COUNTER FLUKE 985

• Six channels and particle size range of 0.3 - 10.0 µm
• Ultra-lightweight and ergonomic design
• Large 3.5 QVGC Color display
• 10,000 record storage
• USB/Ethernet charge cradle

 

INTERNAL BATTERY RESISTANCE ANALYZER FLUKE BT520

• Key measurements: Battery resistance, dc and ac voltage, dc and ac current, ripple voltage, frequency and battery temperature.
• Enhanced data analysis: Quickly compare trends, analyze results and create reports with included battery management software.
• Easy reporting: Generate PDF report on the PC software with analysis graphics and data table or quick email format report with csv file on the mobile app.
• Wireless communication
• USB Port

 

FLUKE 438 II MOTOR AND ENERGY QUALITY ANALYZER

• Measure key parameters on direct-on-line motors including torque, RPM, mechanical power and motor efficiency
• Perform dynamic motor analysis by plotting of motor derating factor against load according to NEMA/IEC guidelines
• Calculate mechanical power and efficiency without the need of mechanical sensors, just connect to the input conductors and you're ready to go
• Measure electrical power parameters such as voltage, current, power, apparent power, power factor, harmonic distortion and unbalance to identify characteristics that impact motor efficiency

 

FLUKE 700LTP-1 LOW-PRESSURE VACUUM TEST PUMP

• hand operated pressure pump
• designed to generate either vacuum to -13 psi / -.90 bar or pressures to 100 psi / 6.9 bar
• Pump can be easily cleaned without disassembly
• Adjustable pressure relief valve with slow-bleed capability. Allows the slow release pressure at a controlled rate
• Quick fit connectors, one for the reference port for connection to a Fluke 700 series pressure module and one to connect to a unit under test
• Slim design, easy to carry and use