iFlex fexible current probe compatible
600 A AC and DC current measurement with fxed jaw
2500 A AC current measurement with iFlex (sold separately)
600 V AC and DC voltage measurement
True-rms AC voltage and current
Frequency measurement to 500 Hz
60 k O resistance measurement
Min/Max/Avg and inrush recording
500 mV dc measurement range
1000 µF capacitance measurement
CAT IV 600 V, CAT III 1000 V safety rating
Integrated low pass filter and state of the art signal processing allows for use in noisy electrical environments while providing stable readings
Proprietary inrush measurement technology to filter out noise and capture motor starting current exactly as the circuit protection sees it
Ergonomic design fits in your hand and can be used while wearing protective equipment
Large, easy to read backlight display automatically sets the correct measurement range so you do not need to change the switch positions while taking a measurement
Three-year warranty
Soft carrying case

Standard accessories

Coated instruction card
Safety information sheet
Soft carrying case
TL75 test leads
Two AA Alkaline batteries

Recommended options

i2500-18 iFlex™ Flexible Current Probes 2500 A
i2500-10 iFlex™ Flexible Current Probes 2500 A
TL223 SureGrip™ Electrical Test Lead Kit
TL71 Test Lead Set
TL224 SureGrip™ Silicone Test Lead Set
AC72 Alligator Clip Set
AC285 SureGrip™ Alligator Clip Set
AC220 SureGrip™ Alligator Clip Set
AC87 Heavy Duty Bus Bar Clips
AC89 Heavy Duty Insulation Piercing Test Clip
TL75 Hard Point Test Lead Set
TP1 Slim Reach Test Probe (flat blade)
Fluke MeterCleaner Wipes
H3 Holster (330 Series)
C33 Soft Carrying Case
C1600 Gear Box for Meter and Accessories
C550 Tool Bag
LVD2 Volt Light
L206 Deluxe LED Hat Light
LVD1 Volt Light

More products FLUKE

FLUKE 6306 AUTOMATIC RCL METER 50 HZ..1 MHZ

• 50, 60, 100, 120 Hz 200 Hz to 100 kHz (100 Hz steps)
• 100 kHz to 1 MHz (1 kHz steps) test frequencies
• 0.1 % basic accuracy
• Easy to use, at-a-glance display

VOLTAGE CONTINUITY TESTER FLUKE T100

• Display: 12 LED's
• Voltage test
• Optical and acoustical continuity test

FLUKE VT02 INFRARED THERMOMETER WITH INTEGRATED CAMERA

• take simultaneous visual images with the thermal heat map images that are accurately aligned close in
• Temperature measurement range -10 °C to +250 °C (14 °F to 482 °F)
• Infrared spectral band 6.5 µm to 14 µm
• Minimum focus distance 50 cm (19.6 in)
• Field of View 20° X 20°
• 4 GB Micro SD card

FLUKE 115 HANDHELD DIGITAL MULTIMETER 3.5 DIGIT

• 3.5 digit
• 6000 count
• 0.5% accuracy
• AC/DC Current
• Capacitance and Frequency

POWER QUALITY CLAMP METER FLUKE 345

• 2000A AC/DC current
• 600 V CAT IV power analyzer
• Data logging
• Troubleshoot harmonics
• Inrush current

CURRENT CLAMP METER AC/DC TRUE-RMS 2000 A FLUKE 355

• 2000 A AC + DC true-rms, 1400 A AC, and 2000 A DC
• large 58 mm (2.3 in) jaw capacity
• 1000 V AC + DC true-rms, 600 V AC, and 1000 V DC
• Accurately measure frequency up to 1 kHz
• Resistance to 400 Kohms

INTRINSICALLY SAFE CALIBRATOR FLUKE 725EX

• 0 to 100 mV, 0 to 30 V DC Voltage measure
• 0 to 100mV, 0 to 10 V DC Voltage source / simulate
• 0 to 24 mA Current measure / source / simulate
• 0 to 3200 O Resistance measure / source / simulate
• 1 to 10 kHz Frequency measure / source / simulate
• RTDs, thermocouples measure / source / simulate
• pressure measure
• ATEX II 1 G Ex ia IIB 171°C KEMA 04ATEX 1303X

CARBON MONOXIDE TESTER FLUKE CO-220

• Rugged case and electronics.
• Large LCD displays CO levels from 0 to 1000 ppm.
• Bright back-light allows easy screen viewing under dim lighting conditions.
• Beeper triggers with increasing frequency as CO levels rise.
• MAX Hold function stores and displays the maximum CO level.
• Automatic sensor zeroing and self-test sequence upon start-up.

FLUKE 700LTP-1 LOW-PRESSURE VACUUM TEST PUMP

• hand operated pressure pump
• designed to generate either vacuum to -13 psi / -.90 bar or pressures to 100 psi / 6.9 bar
• Pump can be easily cleaned without disassembly
• Adjustable pressure relief valve with slow-bleed capability. Allows the slow release pressure at a controlled rate
• Quick fit connectors, one for the reference port for connection to a Fluke 700 series pressure module and one to connect to a unit under test
• Slim design, easy to carry and use

CURRENT CLAMP METER TRUE-RMS AC/DC 200A FLUKE 365

• 200 A AC and DC current measurement with detachable jaw
• 600 V AC and DC voltage measurement
• True-rms AC voltage and current
• 6000 O resistance measurement