Extech RH520A-220 Humidity+Temperature Chart Recorder with Detachable Probe (220V)

Code: Extech RH520A-220


 

Datasheet PDF, 0.42 Mb

Description

Graphical datalogger for Humidity/Temperature measurements and Dew Point calculation

This paperless chart recorder provides simultaneous digital and graphical display of relative humidity and temperature. The display also shows dew point, date and time and Min/Max measurements. Stored readings can be recalled on the display or downloaded to a PC to obtain a permanent record. Provisions for wall mounting or the control panel swivels to act as a desk stand. The user can set audible and visual alarms with High and Low limits for humidity and temperature. LabView software calculates Wet Bulb and Grains per Pound (GPP). Comes complete with detachable sensor probe with 1 meter cable, RS-232 cable with USB adapter, LabView-based software, 220 VAC adapter, and three AA batteries.

 

Features:

·         Simultaneous numerical and graphical display of Humidity and Temperature readings, plus Time and Date

·         Measures Humidity (10 to 95%RH) and Temperature (-20.0°F to 140.0°F) plus calculates Dew Point

·         Basic accuracy 3%RH, 1.8°F/1°C

·         Large dual graphical LCD displays with adjustable vertical and horizontal TAC resolution

·         Internal memory records up to 49,000 data points and can be transferred to a PC via RS-232 serial port for further data analysis

·         LCD indicates percentage of memory remaining

·         Comes with 220V AC power supply

 

 

More products EXTECH

EXTECH 382203 ANALOG TRIPLE OUTPUT DC POWER SUPPLY

• Adjustable Voltage and Current output
• Easy snap terminals for fixed 5V/0.5A and 12V/1A outputs
• Constant Voltage or Current
• Current limiting indicator
• Overload and short circuit protection
• Binding post terminals for variable supply

 

EXTECH 382270 QUAD OUTPUT DC POWER SUPPLY

• Two fully adjustable supplies combined with two auxiliary outputs
• Two 0 to 30V/0 to 5A outputs with selectable Constant Voltage and Constant Current modes
• Two auxiliary outputs with fixed current of 3 to 6.5V/3A and 8 to 15V/1A

 

EXTECH 40180 TONE GENERATOR AND AMPLIFIER PROBE CIRCUIT FINDER KIT

• Insulated inductive probe tip prevents shorting conductors
• Tests include wire trace, continuity test, clear/busy/ringing line test and tip/ring identification
• Alligator clips for non-terminated cables and modular connectors for direct connections to telephone and internet wiring
• Selectable continuous or variable tone generation
• Built-in speaker on probe with sensitivity control

 

EXTECH EX363 11 FUNCTION TRUE RMS MULTIMETER

• Ideal for HVAC applications
• True RMS for accurate AC measurements
• 6000 count white LED backlit display
• Functions include: NCV, AC/DC Voltage, AC/DC micro Current, Resistance, Capacitance, Frequency, Type-K Temperature, Diode Test, Continuity
• Fast 60-segment Analog Bargraph for viewing trends

 

EXTECH 407760: USB SOUND LEVEL DATALOGGER

• Designed to meet ANSI and IEC 61672 Class 2 standards
• USB interface for easy setup and data download
• 30 to 130dB range
• Datalogging capability up to 129,920 records

 

EXTECH ET10: GFCI RECEPTACLE TESTER

• Works with GFCI circuits
• Tests for faulty wiring in 3-wire receptacles: Correct, Open Ground, Open Neutral, Open Hot, Hot/Ground Reverse, Hot/Neutral Reverse
• Lights indicate circuit condition
• Standard North American 3-prong plug

 

EXTECH LCR200: PASSIVE COMPONENT LCR METER

• Measures Inductance, Capacitance, and Resistance with secondary parameter Q (Quality), D (Dissipation), R (Resistance), P (Phase), ESR (Equivalent Series Resistance)
• Simultaneous 20,000/2,000 count backlit display of the primary parameter (L, C or R) with the secondary parameter
• Auto Select measurement function with 1kHz default test frequency
• Five test frequencies
• Set Hi/Lo limits using absolute values or percentage limits

 

EXTECH BT100: BATTERY CAPACITY TESTER

• On-line testing without shutting down battery
• Built-in datalogger stores up to 999 tests
• Simultaneously measures battery resistance and voltage
• PC software for downloading readings to a PC

 

EXTECH PRC30: MULTIFUNCTION PROCESS CALIBRATOR

• 0 to 24mA (-25 to 125%) readout
• 24V DC power source for 2-wire current loop
• 0 to 20V DC calibration source
• Source and measure 8 thermocouple type devices (J, K, T, E, C, R, S and N)
• CJC - Cold Junction Compensation function
• Up to five user adjustable calibration presets
• Palm-sized double molded housing and large dot-matrix backlit LCD

 

EXTECH HD700 DIFFERENTIAL PRESSURE MANOMETER (2PSI)

• ±2psi range, 11 Selectable units of measure
• Max/Min/Avg recording and Relative time stamp
• Data Hold, Auto power off and Zero function
• Large LCD display with backlighting