Extech AN320 Large Vane CFM/CMM Anemometer/Psychrometer plus CO2

Code: Extech AN320


 

Datasheet PDF, 0.35 Mb

Description

  • 4" (10cm) vane allows for more precise readings on larger size ducts
  • Air Velocity, Air Flow, Relative Humidity, Wet Bulb and Dew Point, Carbon Dioxide (CO2)
  • Built-in thermistor for air temperature
  • Multipoint and timed average calculations
  • Min/Max, Data Hold, and Auto power off
  • Complete with four AAA batteries and hard carrying case

Specifications

Range

m/s / Basic Accuracy

0.2 to 30m/s / ±1.5%

ft/min / Basic Accuracy

40 to 5900ft/min / ±1.5%

CFM/CMM

0 to 99999

Temperature / Basic Accuracy

-4 to 140°F (-20 to 60°C) / ±0.6°C

Humidity / Basic Accuracy

0.1 to 99.9%RH / ±3%RH

Wet Bulb

-4 to 140°F (-20 to 60°C)

Dew Point

23 to 140°F (-5 to 60°C)

Carbon Dioxide (CO2)

0 to 9999ppm

Dimensions/ Weight

10.6x4.2x2" (269x106x51mm) / 7oz (200g)

 

 

 

 

More products EXTECH

EXTECH TG20 WIRE TRACER KIT

• Transmitter with output cables terminated in modular RJ11 phone connector
• Transmitter injects traceable signal into cables, checks telephone lines, and performs continuity checks
• Non-Contact probe audibly identifies selected wire or cable
• Easily trace wires from source to termination
• Test for properly operating phone lines

 

WIRELESS DISPLAY INSPECTION VIDEO CAMERA EXTECH BR200

• Memory card for capturing images (JPEG) or video (AVI) for viewing on your PC
• Detachable wireless 3.5" color TFT LCD display can be viewed from a remote location up to 32ft (10m) from the measurement point
• 39" (1m) flexible gooseneck with waterproof camera (17mm diameter) and 2 built-in bright LED lights for illuminating dark areas

 

EXTECH 380803 TRUE RMS POWER ANALYZER DATALOGGER

• Built-in Datalogger stores up to 1,012 readings (single record/continuous datalogging)
• Four simultaneous displays of Watts, Power Factor or VA, Voltage or Hz, Amps
• True RMS Voltage & Current measurements of sine, square, triangular and distorted wave forms with a crest factor < 5
• Plug device to be tested directly into the Power Analyzer

 

EXTECH MN47 12 FUNCTION COMPACT MULTIMETER + NCV

• Built-in Non-contact Voltage Detector (from 100 to 600VAC)
• AC/DC Voltage, AC/DC Current, Resistance, Capacitance, Frequency, Type-K Temperature, Duty Cycle, Continuity / Diode
• Autoranging with manual override
• 4000 count high-contrast LCD display

 

EXTECH 480400 PHASE SEQUENCE TESTER

• Checks phase sequence and phase status
• Tests up to 600VAC and displays graphical phase orientation on the large LCD
• Double molded durable housing
• Easy to use alligator clips with wide jaws

 

EXTECH 382213: DIGITAL TRIPLE OUTPUT DC POWER SUPPLY

• Adjustable Voltage and Current output
• Easy snap terminals for fixed 5V/0.5A and 12V/1A outputs
• Constant Voltage or Current
• Current limiting indicator

 

EXTECH MA200 400A AC CLAMP METER

• 2000 count LCD display
• High accuracy for Current measurements
• 0.9" (23mm) jaw size accommodates conductors up to 300MCM
• Continuity beeper and Diode test
• Data Hold, Max Hold
• Overload protection for all ranges
• Overrange and low battery indicators
• Autoranging with Auto Power Off
• Complete with test leads, case and two AAA batteries

 

EXTECH HT200 HEAT STRESS WBGT (WET BULB GLOBE TEMPERATURE) METER

• Meter accurately determines the Heat Stress level by factoring a combination of humidity, temperature, air movement, and direct solar radiation
• Uses a capacitance sensor to accurately measure Wet Bulb Globe Temperature (WBGT), Black Globe Temperature (TG), Relative Humidity (%RH), Air Temperature (TA), Wet Bulb (WT) and Dew Point (DEW)
• Black Globe Temperature (TG) monitors the effects of direct solar radiation on an exposed surface
• In/Out function displays the WBGT value with or without direct sun exposure

 

EXTECH 382203 ANALOG TRIPLE OUTPUT DC POWER SUPPLY

• Adjustable Voltage and Current output
• Easy snap terminals for fixed 5V/0.5A and 12V/1A outputs
• Constant Voltage or Current
• Current limiting indicator
• Overload and short circuit protection
• Binding post terminals for variable supply

 

EXTECH SDL710 DIFFERENTIAL PRESSURE MANOMETER/DATALOGGER

• Record/Recall Max/Min readings
• Data Hold and Auto power off with disable
• Large LCD display with backlighting
• Zero function for offset correction or measurement