Extech 380460 Precision Milliohm Meter (110V)

• Autoranging DMM with 12 functions and 0.5% basic accuracy
• AC/DC Voltage & Current, Resistance, Capacitance, Frequency, Temperature, Duty Cycle, Diode/Continuity
• Built-in non-contact AC voltage detector (NCV) with red LED indicator and audible beeper
• Large-digit 4,000 count LCD display
• 10A max Current

 

• Wide range to 10,000Fc or 100kLux
• Cosine and color-corrected measurements
• Utilizes precision silicon photo diode and spectral response filter
• Offset adjustment used for zero function to make relative measurements
• Adjustable data sampling rate

 

• 7 ranges for wide low resistance measurements
• High resolution to 0.01mOhm
• 1999 count display with 0.8" digits
• 4-wire test cable with Kelvin clip connectors
• Automatic zero
• Built-in comparator for Hi/Lo/Go resistance testing or selection

 

• Dual LCD simultaneously displays Carbon Monoxide (CO) level and maximum CO reading taken from when the meter was powered on
• Long life electrochemical sensor
• Adjustable CO warning level at 25, 30, 35, 45, 50, 70, 100 and 200ppm (alarm is preset to 25ppm)
• Audible alarm when CO level reaches the warning set point level
• Choose from 3 calibration points: 0 (preset), 100, and 500ppm

 

• Quickly locate 110V to 125VAC Circuit Breakers and Fuses
• Variable Sensitivity adjustment to pinpoint correct circuit breaker
• Bright Red and Green LEDs indicates if receptacle is correctly wired or six fault conditions
• Push button GFCI test
• Audible and visual circuit breaker indication

 

• Measures Inductance, Capacitance, and Resistance with secondary parameter Q (Quality), D (Dissipation), R (Resistance), P (Phase), ESR (Equivalent Series Resistance)
• Simultaneous 20,000/2,000 count backlit display of the primary parameter (L, C or R) with the secondary parameter
• Auto Select measurement function with 1kHz default test frequency
• Five test frequencies
• Set Hi/Lo limits using absolute values or percentage limits

 

• 0 to 24mA (-25 to 125%) readout
• 0 to 20V DC calibration source
• Up to five user adjustable calibration presets
• Palm-sized double molded housing and large dot-matrix digital backlit LCD
• Standard banana I/O ports

 

• Mobile phone base station antenna radiation
• RF power measurement for transmitters
• Wireless LAN (Wi-Fi) detection/installation
• Wireless communication applications (CW TDMA GSM DECT)
• Microwave leakage

 

• Two fully adjustable supplies combined with two auxiliary outputs
• Two 0 to 30V/0 to 5A outputs with selectable Constant Voltage and Constant Current modes
• Two auxiliary outputs with fixed current of 3 to 6.5V/3A and 8 to 15V/1A

 

• Measure electromagnetic field radiation levels from fans, electrical appliances, wiring, and power lines
• Large 1/2" LCD (1999 count) display of Electromagnetic Field (EMF) level in milliGauss or microTesla
• Accurate measurements to 4% over a measuring range of 0.1 to 199.9mGauss (0.01 to 19.99µTesla)
• ELF frequency bandwidth of 30Hz to 300Hz
• Single axis - sampling 2.5 times per second