High performance screen rooms, providing attenuation of both the incoming and outgoing mains supply lines to match the shield performance
Tempest applications, where the very highest degree of protection is required to obtain maximum security
EMP protection systems

Electrical Specifications

Part #	Current Max	Frequency	Max Voltage	# of Lines	Voltage Drop On Full Load in 250V 50/50Hz System/Line	DC Resistance Per Line
N2550	6 A	50/60 Hz	250 V	2	1 V	50 O
N2551	6 A	50/60 Hz	440/250 V	4	1 V	50 O
N2552	16 A	50/60 Hz	250 V	2	1 V	12 O
N2553	16 A	50/60 Hz	440/250 V	4	1 V	12 O
N2554	32 A	50/60 Hz	250 V	2	0.6 V	24 O
N2555	32 A	50/60 Hz	440/250 V	4	0.6 V	24 O
N2556	63 A	50/60 Hz	250 V	2	1.5 V	15 O
N2557	63 A	50/60 Hz	440/250 V	4	1.5 V	15 O
N2558	100 A	50/60 Hz	250 V	2	0.9 V	5 O
N2559	100 A	50/60 Hz	440/250 V	4	0.9 V	5 O

More products ETS-LINDGREN

ACTIVE MONOPOLE RECEPTION ANTENNA 30 HZ..50 MHZ ETS-LINDGREN 3301C

• Frequency Minimum 30 Hz
• Frequency Maximum 50 MHz
• Connectors BNC (f)
• Impedance (Nominal) 50 ?
• Polarization linear
• 30 hours of continuous operation in a single charge

ACTIVE RECEIVING LOOP SHIELDED ANTENNA 1 KHZ..30 MHZ ETS-LINDGREN 6502

• Frequency Minimum 1 kHz
• Frequency Maximum 30 MHz
• 1 dB Comp. Point 10 V/m
• Connectors BNC (f)
• Dynamic Range 116 dB @ 1 MHz , 76 dB @ 10 kHz
• Impedance (Nominal) 50 ?
• Pattern Type omnidirectional
• Polarization linear

PROTECTION FILTERS FOR TEMPEST/ RFI/ EMI DIGITAL ANALOG DATA TRANSMISSIONS ETS-LINDGREN N2460

• Suitable for EMI and Tempest Protection
• Digital and analogue transmissions
• Tubular, flat-pack or modular design

BROADBAND OMNIDIRECTIONAL ANTENNA FOR SPECTRUM MONITORING 500 MHZ..18 GHZ ETS-LINDGREN 3181

• Frequency Minimum 500 MHz
• Frequency Maximum 18 GHz
• Connectors SMA (F)
• Impedance (Nominal) 50 ?
• Maximum Continuous Power 200 watts @ 500 MHz, 25 watts @ 18 GHz

DOUBLE-RIDGED MICROWAVE GUIDE HORN ANTENNA 750 MHZ..18 GHZ ETS-LINDGREN 3115

• Frequency Minimum 750 MHz
• Frequency Maximum 18 GHz
• Connectors Type N (f)
• Impedance (Nominal) 50 ?
• Maximum Continuous Power 500 W
• Pattern Type directional
• Polarization linear

HIGH PERFORMANCE POWER FILTERS FOR TEMPEST/ EMP APPLICATIONS CURRENTS 16..200A ETS-LINDGREN N600X

• Suitable for 400Hz supplies
• Compact Rugged Construction
• Maximum Protection for EMP and Tempest applications
• Current Range 16 to 200 Amperes
• 100 dB Insertion Loss from 14 kHz to 40 GHz
• Low power dissipation

POWER FILTERS FOR RFI/ EMI RADIATION PROTECTION CURRENTS 6..100A ETS-LINDGREN N182X

• Current Rating 6 Amps
• Number of Lines 2
• 100dB insertion loss
• High protection rate against EMI

DOUBLE-RIDGED WAVEGUIDE HORN ANTENNA FOR EMC MEASUREMENTS 400 MHZ..6 GHZ ETS-LINDGREN 3119

• Frequency Minimum 400 MHz
• Frequency Maximum 6 GHz
• VSWR Ratio (AVG) 3.5:1 max
• <2:1 above 500 MHz
• Maximum Continuous Power 1500 W @ 400 MHz, 800 W @ 6 GHz
• Peak Power 2500 W

QUAD-RIDGED OPEN BOUNDARY HORN ANTENNA 700 MHZ..10 GHZ ETS-LINDGREN 3164-08

• Frequency Minimum 700 MHz
• Frequency Maximum 10 GHz
• Cross Polarization Isolation >20 dB
• Impedance 50 ?
• Connector Input Power SMA Female (2)
• 700 MHz - 10 GHz Frequency Range
• Linear or Circular Polarization (With Hybrid)

BROADBAND E-FIELD MONITORING SYSTEM 10 KHZ..40 GHZ ETS-LINDGREN HI-6100 E-FIELD MONITOR

• HI-6100 Field Monitor with 4 Probe Input Channels
• Large Color LCD Display
• IEEE-488, RS-232, USB Interfaces
• USB & RS232 Interface Modules available for Record & View measurements
• Electric Field Probes for 10 kHz..40 GHz frequencies