The demand for high-speed wireless service has resulted in the deployment of advanced cell sites, many of which employ RF technology or newer fiber-based feedlines. As with traditional RF networks, where connectors are often the root problem to system performance, contamination in fiber connectors is the most common problem associated with the fiber feedline. Since a majority of wireless network performance issues occur within the base station infrastructure, consisting of the feedline (RF or fiber), antenna system and associated connectors, it is imperative that all wireless networks with fiber-based feedlines verify the performance of both RF and fiber-based systems. Designed specifically for carriers, wireless professionals and contractors who install, maintain and troubleshoot wireless communications networks (RF or fiber), the E7000B Cable & Antenna Analyzer provides an integrated solution that tests both RF and fiber-based wireless cell sites, thereby eliminating the need to carry multiple instruments. All necessary measurement functions and performance are included to accurately diagnose and verify both RF and fiber-based feedlines, antenna system and connectors. Fiber-based measurements include Fiber Scope to detect and identify dirty/damaged connections, Visual Fiber Location (VFL) to access fiber continuity and detect excessive bends and breaks in the fiber, as well as verifying if the correct fiber is routed to the correct RRU Port, and Optical Power Meter to verify transmission power level.

Features:

RF and fiber testing in a single solution
Handheld, lightweight, field-proven design withstands harsh environments and lighting conditions
Easily set up measurements with over 100 preset wireless frequency bands and cable types
Reduce test time with dual measurement display to make two measurements simultaneously
Detect signal degradation and system performance over time with trace overlay
Instant Pass/Fail status
Manage your measurement data and test setups with Measurement Center Software
Intuitive touchscreen user interface for easier, faster measurements

More products DEVISER

DEVISER DS2580C DIGITAL TV QAM ANALYZER

• Analog TV measurements include: Level, V/A, HUM, C/N
• Auto-generates and saves up to 20 custom channel plans from a cable drop
• Auto test with pass/fail limits speeds up tests and simplifies results interpretation

QAM QPSK TV RETURN-PATH SIGNAL GENERATOR 5..120 MHZ DEVISER DS5200

• ideal return path generator for HFC system installation and maintenance
• Wide frequency covers return path: 5MHz-120MHz
• QPSK, 16/64/256QAM
• Large level dynamic range
• Multi-function module: RF, Pulse, Sweep
• Parameter setup memory

DEVISER TC601A HANDHELD GIGABIT ETHERNET TESTER

• Smart Loopback at Layer 1/2/3/4
• Cable diagnostics
• Optical power measurement
• IP Tools: Ping, TraceRoute, IPv4 and

CABLE AND ANTENNA ANALYZER 25MHZ..4.4/6GHZ DEVISER E7000

• E7000A: 25 MHz to 4400 MHz
• E7100A: 25 MHz to 6000 MHz
• Spectrum Analyzer Option 100kHz to 3000 MHz
• Return Loss/VSWR
• Cable Loss
• Distance-To-Fault
• 1-Port Phase
• Smith Chart
• 2-ports Transmission Measurements(With E7000-SA Option)
• USB Power Meter Sensor Option
• GPS Receiver Option

TV SIGNAL LEVEL METER FOR DVBT DVBT2 DVBC DEVISER DS2400T

• Compatible with DVB-T/T2 and DVB-C standard
• DVB-T/T2: Comply with ETS300744 standard/ Support Power, MER, CBER and VBER
• DVB-C: Support Digital and Analog TV Measurements
• Spectrum Function (5~1000MHz)
• Easy to use

DEVISER EP310 SERIES PON POWER METER

• Simultaneously verifies the power levels of all PON wavelengths (1310 nm, 1490nm, and 1550nm)
• Pass/fail analysis helps user quickly interpret results and ensures consistent PON turn-up
• Green light/red light LED helps user easily identify pass/fail results
• Rugged unit is water- and shock-resistant

OPTICAL MULTIMETER: POWER METER + LIGHT SOURCE DEVISER EP700

• Integration of optical power meter, light source and visible faulty locator
• FTTX application and PON wavelength
• 30 hours working time

DEVISER TC601+ ETHERNET SERVICE TESTER

• 5½ (800x480) color LCD touchscreen
• 1000Base-X optical port, 10/100/1000Base-T electrical port x1
• Integrates multiple software tools for field measurement, ensuring high cost-performance
• Professional PDF and CSV data report generation
• Rechargeable lithium battery powers continuous use

PON OPTICAL FIBER POWER METER DEVISER EP300

• Simultaneous measurement of all EPON signal(1310 nm, 1490 nm and 1550 nm) on the fiber
• Store up to 1800 test results, which are downloadable via USB interface.
• Pass/Warning/Fail LED indicators (12 threshold values).
• Compact, Waterproof & shockproof.
• the best choice for your business and maintenance of FTTX

DEVISER E7000L CABLE & ANTENNA ANALYZER

• Detect signal degradation and system performance over time with trace overlay
• Instant Pass/Fail status
• Manage your measurement data and test setups with Measurement Center Software
• Intuitive touchscreen user interface for easier, faster measurements