QAM QPSK TV Return-Path Signal Generator 5..120 MHz Deviser DS5200

Code: Deviser DS5200


 

Datasheet PDF, 0.31 Mb

Description

  • DS5200 is ideal return path generator for HFC system installation and maintenance.

  • Wide frequency covers return path: 5MHz-120MHz
  • QPSK, 16/64/256QAM
  • Large level dynamic range
  • Multi-function module: RF, Pulse, Sweep
  • Parameter setup memory

Frequency

Range

CW: 5MHz-120MHz

Digital Signal: 5MHz (Left Edge Frequency) -120MHz (Center Frequency)

Accuracy

±2ppm

Resolution

10kHz

Level

Range

0-60dBmV

Accuracy

CW: ±1.5dB

Digital Signal: ±2.0dB

Resolution

1.0dB

Output Impedance

75O

VSWR

<2.0

Spectrum Pureness

Harmonic Restraint Ratio

=-40dBc

Non Harmonic Stray

=-40dBc

Phase Noise

(At 50MHz CW) 85dBc@10kHZ 105dBc@100kHZ

Modulation Signal

Type

QPSK, 16/64/256QAM

SR

1MS/s-7MS/s

BW

1.25MHz-8.75MHz

Roll Off

a=0.25

MER

?36.0dB

BER

<1E-9 Errors

FEC

RS(204, 188)

Frequency Sweep

Range

5MHz-120MHz(CW)

Step

10kHZ-1MHz

Frequency Interval

10ms

Level Flatness

<2.0dB

Others

Advance Setup

5

Communication Port

RS 232C

Working Temperature

-20?~50?

Size

About 218mm×95mm×49mm

Weight

About 800g

Battery Life

>4 hours

 

More products DEVISER

OTDR OPTICAL FIBER ANALYZER DEVISER AE3000

• 1310/1550 nm Wavelength
• Up to 40dB dynamic Range
• 6.4" color TFT LCD display for improved viewing.
• Friendly operation interface and convenient one-button testing.
• High-speed signal processing, less measurement time, and faster result analysis.
• Ideal for the field: compact and lightweight, shock proof, water proof, resistant to dust and common chemicals.
• Large internal memory (up to 1000 test results).
• Lithium battery included with more than 10 hours operation time.
• Based on Linux operating system and unlimited upgrade.

 

DEVISER AE3100 SERIES HANDHELD OTDR

• Broad dynamic range coverage (28 - 39 dB)
• Minimum 5cm resolution
• Intelligent analysis of events
• Excellent stability and repeatability

 

DEVISER LS310 SERIES LIGHT SOURCE

• Multi-wavelength output: 1310 & 1550nm, or 1310 & 1490 & 1550nm (depending on model)
• CW mode or modulated mode: 270Hz, 1kHz, 2kHz
• 30 hours working time

 

VECTOR NETWORK ANALYZER 300 KHZ..3 GHZ DEVISER NA7300

• Frequency Range 300KHz~3GHz
• 75 or 50 ohm
• Two channels, Four traces display
• Transmission, Insertion Loss, Gain, Insertion Phase, Isolation
• Group Delay, Return Loss, VSWR, Impedance
• USB, parallel, RS-232 and VGA,LAN interface

 

DEVISER TC601A HANDHELD GIGABIT ETHERNET TESTER

• Smart Loopback at Layer 1/2/3/4
• Cable diagnostics
• Optical power measurement
• IP Tools: Ping, TraceRoute, IPv4 and

 

DEVISER SIGNALPROFILER E7042B

• Perform comprehensive spectrum and signal analysis for complete site profile and monitoring of signal environment
• Test MIMO 4x4 antenna performance
• Detect signal degradation and system performance over time with trace overlay

 

OPTIC LIGHT SOURCE DEVISER LS

• light source qualified in optical network, CATV and FTTX maintenance
• Multi wavelength output,
• CW mode or modulated mode, 270Hz, 330Hz, 1KHz, 2KHz
• Adjustable output power
• 30 hours working time

 

DEVISER DS2831 DIGITAL TV SPECTRUM ANALYZER

• Analog TV and SC-QAM: troubleshoot typical analog interference and distortions as well as SC-QAM performance
• Time-Domain EVS Measurements: uncover interference from LTE signals under downstream QAM carriers with no service interruptions
• Characterize OFDM carrier performance and DOCSIS 3.1 cable modem performance
• 7½ Capacitive Touchscreen: with excellent touch response and 7 hours of operating time

 

TV & CATV QAM SPECTRUM ANALYZER FOR HFC NETWORK INSTALLATION 5..1000 MHZ DEVISER 2500

• Digital TV analysis Channel power, MER, BER, Constellation etc
• Enhanced Spectrum Analysis Function
• 4 inch full-color TFT LCD
• Linux operating system
• Large memory
• USB & LAN
• Cable Modem Testing Module

 

OPTICAL MULTIMETER: POWER METER + LIGHT SOURCE DEVISER EP700

• Integration of optical power meter, light source and visible faulty locator
• FTTX application and PON wavelength
• 30 hours working time