With its site-proof casing, the C.A 6555 insulation tester is used to check equipment insulation during manufacturing, on-site installation work, periodic inspections and recommissioning of installations.

Specially adapted for checking insulation on rotating machinery with a 12 kV power supply or higher, the C.A 6550 complies with the IEEE43

standard which recommends testing insulation at 5-10kV.

Main users: electricity companies, manufacturers, installers, maintenance firms, industry, R&D centres and infrastructure.

Other features:

- Wide measurement range from 10 kohm to 30 Tohm

- Fixed or programmable test voltage from 40V to 15 kV

- 5mA max. charging current

- Large backlit LCD screen with digital display, bargraph and R(t)+u(t), i(t) and i(u) graphs

- Automatic ratio calculation: DAR / PI / DD / DR (ppm/V)

- Multiple test modes: voltage ramp and step with "burning", "early break" and "I-limit" modes

- 3 filters to optimize measurement stability

- Calculation of R at a reference temperature

- 80,000-measurement storage capacity and real-time clock

- Optically-isolated USB communication for transfer onto PC and report generation with DataView® software

Standard accessories

CA6550½ P01139705

CA6555½ P01139706

C.A 6550 and C.A 6555 delivered with

a bag with 2 safety leads 3 m long equipped with an HV plug at each end (red / blue),

1 guard test lead

3 m long equipped with an HV plug at one end and an HV plug with rear

connection at the other end (black),

3 crocodiles clips (red, blue, black),

2 CAT IV 1,000 V test probes (red/black) for voltage measurements,

1 blue lead with rear connection,

1 mains power cable 2 m long,

DataView® software,

1 optical / USB communication lead,

1 operating

manual in 5 languages on CD-ROM and 5 specification labels(1 per language).

Recommended options

Accessories / Replacement Parts

3 HV leads with croc. clips for 10/15 kV ... P01295466

Blue 8 m HV lead with croc. clips ... P01295468

Red 8 m HV lead with croc. clips ... P01295469

Black 8 m HV lead with croc. clips ... P01295470

Blue 15 m HV lead with croc. clips ... P01295471

Red 15 m HV lead with croc. clips ... P01295472

Black 15 m HV lead with croc. clips ... P01295473

3 x 3 m HV leads for 10/15kV ... P01295465

50 cm HV lead with rear connection ... P01295467

2 red/black test probes ... P01295454Z

3 crocodile clips: red/blue/black ... P01103062

Bag ... P01298066

C.A 861 thermocouple thermometer ... P01650101Z

C.A 846 thermohygrometer ... P01156301Z

More products CHAUVIN ARNOUX

EARTH RESISTANCE DIGITAL TESTER CHAUVIN ARNOUX CA6423

• earth resistance: 0.00 to 2,000O (3 cal.)
• 3 fault presence indicators to validate the measurement
• measurement frequency: 128Hz
• connection of rods to colour-coded terminals
• a removable captive connection strip between H and S for measurement of 2-wire resistance
• large 2,000-count digital display with 18mm digits: excellent readability

MEGOHMMETER 15KV CHAUVIN ARNOUX CA6555

• Wide measurement range from 10 kohm to 30 Tohm
• Fixed or programmable test voltage from 40V to 15 kV
• 5mA max. charging current
• Large backlit LCD screen with digital display, bargraph and R(t)+u(t), i(t) and i(u) graphs
• Automatic ratio calculation: DAR / PI / DD / DR (ppm/V)
• Multiple test modes: voltage ramp and step with "burning", "early break" and "I-limit" modes

THREE-PHASE ENERGY ANALYZER CHAUVIN-ARNOUX CA8335 QUALISTAR PLUS

• - Voltage ratios: 1 V to 500 kV
• - Mixed sensors: 10 mA to 60 kA depending on sensor
• for quick verification of network quality and simple processing of the results

EARTH AND LOOP RESISTANCE TESTER CHAUVIN ARNOUX CA6456

• loop resistance and impedance: L-N, L-L, and L-PE from 0.20 to 4 kO
• short-circuit current displayed up to 40 kA by calculation (Uref/ZL-PE)
• clamp measurement of current and leakage current (option)
• Cat. III, 600V

INSULATION MEGOHMMETER 5000V CHAUVIN ARNOUX CA6545

• wide range from 30k? to 10T? !
• 4 fixed test voltages: 500/1,000/2,500 and 5,000V
• programmable test voltage position: from 40 to 5,100V in increments of 10V or 100V
• giant backlit LCD screen with digital display + bargraph
• qualitative analysis: automatic calculation of DAR, PI and DD

MULTIFUNCTION ELECTRICAL MACHINE TESTER CHAUVIN ARNOUX CA6155

• Measurements in compliance with the IEC 60204 Ed.5 / VDE701/702 / IEC 61439 (IEC 60439) standards
• 200 mA and 10 A continuity measurements
• Insulation resistance at 250 VDC and 500 VDC
• Dielectric test at 1,000 V / 1,890 V / 2,500 V
• Leakage current measurement by substitution method
• Differential leakage current
• Contact leakage current
• Mains power-lead polarity test

INSULATION RESISTANCE MEGOHMMETER 1KV CHAUVIN ARNOUX CA6541

• insulation: up to 4TO (5 cal.) at 50/100/250/500 and 1,000V DC
• automatic calculation of insulation quality ratios: DAR and PI
• programmable test period and plotting of the R(t) curve (automatic memorisation of 20 samples)
• automatic indication of voltage before and after measurement: 1 to 1000V AC/DC
• resistance: from 0.01O to 400kO
• continuity: 0.01O to +40O (audible beep and lead compensation)
• automatic measurement capacity after each insulation measurement: 0.005 to 4.999 ½F

THREE-PHASE POWER QUALITY ANALYZER CHAUVIN-ARNOUX CA8332B QUALISTAR

• Complete three-phase analysis:
• - voltage, current,
• - power / energy,
• - harmonics (50th rank), flicker,
• - alarm trigger...
• Processing of data with DataView PC software.
• Working memory: 2MB

ELECTRICAL INSTALLATION TESTER CHAUVIN ARNOUX CA6114

• automatic installation status test immediately after connection
• measurement of voltage (10 to 440V AC/DC) and frequency (15.3 to 450Hz)
• installation insulation measurement at 500V
• standard earth connection resistance measurement (1 stake + loop method)
• PE conductor continuity test
• measurement of internal loops
• testing of RCDs up to 500mA (exact tripping time and current)
• phase rotation testing

DIGITAL INSULATION MEGOHMMETER 5KV CHAUVIN ARNOUX CA6549

• measurement range: 10k? to 10T?!
• 4 fixed test voltages: 500 / 1,000 / 2,500 and 5,000V
• adjustable test voltage position: 40 to 5,100V in 10V or 100V increments
• step voltage mode: R(Utest) measurement curve viewed on the screen and gradient calculated automatically in ppm/V
• DAR, PI and DD quality ratios calculated automatically
• programmable test length and R(t) measurement curve