Affordably Accurate!

The m1 digital pressure gauge maintains 0.2% of reading accuracy from -10 to 50°C. Accuracy is not affected by dropping, over-pressure, vibration, temperature, or rapid pressure change. Available as a 30 psi digital manometer.

One wide range m1 digital pressure gauge replaces up to five 0.25% mechanical gauges with 0.2% of reading accuracy.

Features:

2-Year recommended calibration interval
Battery life up to 3 years continuous use
Bright backlit display
Easy to read extra-large numbers
Protective boot included
Shifts everyday wear to a replaceable CPF adapter

More products AMETEK

AMETEK DTI-1000 TEMPERATURE INDICATOR

• One year accuracy to ½ 0.004°C
• System accuracy with STS Series temperature sensors to ½ 0.03°C
• Wide Temperature Range of -200 to 750°C (-328 to 1382°F)
• Resolution to 0.001°C

AMETEK CSC SERIES MULTIFUNCTION CALIBRATORS

• Measure Current to 24mA with ½ 0.01 % of reading accuracy
• Measure Voltage to 30VDC with ½ 0.01 % of reading accuracy
• 24VDC Loop Power Supply
• User defined step and ramp functions

AMETEK WT SERIES DIGITAL PRESSURE GAUGE

• 0.1 % of reading accuracy
• Batteries and digital communications are accessible from the front
• Rugged "Wally Box" gauge can withstand dropping and accidental over-pressurization

AMETEK CTC COMPACT TEMPERATURE CALIBRATOR

• Multi-hole and/or insert kits
• Input for external reference sensor on all C models
• MVI circuitry ensures stability despite mains supply variations

AMETEK MACAL LOOP CALIBRATOR

• Source and Measure current to 24 mA with ½ 0.05% of full scale
• Measure voltage from 0 to 45 VDC with ½ 0.5 VDC
• 200 hours of life using 4 x AA batteries

AMETEK XP2I-DP DIFFERENTIAL PRESSURE GAUGE

• Record 32 000 data points
• Battery-optimizing, Ultra Low Power (ULP) Mode
• Over an entire year of continuous recording time

AMETEK AMC910 PROCESS CALIBRATOR

• Read voltage (10V and 100V DC ranges to ½ 0.005%)
• Read current (0 to 50mA to ½ 0.01%)
• 24VDC loop power supply
• Selectable 250 ohm HART resistor

AMETEK ASM SERIES PROCESS MULTI-SCANNER

• Automatic procedures reduce human error
• Dedicate one input channel to a reference sensor with accuracy to 0.026°C
• Uses True Ohm technology to eliminate EMF from cables, sockets, and sensors

AMETEK ETC EASY TEMPERATURE CALIBRATOR

• Accuracy to ½ 0.5°C and Stability to ½ 0.05°C
• Time saving fast cooling and heating times
• Easy-to-read multi-information display

AMETEK DTI050 TEMPERATURE INDICATOR

• Wide selection of sensors (straight, 90°, cabled, etc.) to fit your application
• Useful features like hold, and min / max
• Power with a single 9V battery, or external 9V supply