10kV MOA zinc oxide lightning arrester DC Leakage Current Characteristics Tester Testyle 1075
ROM
ENGElectrical Installations Testers > PITETECH (6) > 10kV MOA zinc oxide lightning arrester DC Leakage Current Characteristics Tester Testyle 1075
- Oscilloscopes
- Multimeters
- Signal Generators
- Spectrum Analyzers
- Universal Frequency Counters
- Power Supplies
- Electronic Loads
- Logic Analyzers
- Data Acquisition Modules
- LCR Analysis & Power Analyzers
- Power Quality Analyzers
- Electrical Installations Testers
- Earth Resistance Ground Testers
- Current Clamp Meters
- Microhmmeters
- Transformers Test
- Hipot High Voltage Testers
- Cable Fault Locators
- Circuit Breaker Analyzers
- Protection Relay Test Systems
- Battery Testers
- Solar Photovoltaic Analyzers
- Cable Network Test
- OTDR & Optical Fiber Test
- Optical Fiber Fusion Splicers
- Wireless Network Analyzers
- RF Powermeters
- TV & Satellite Analyzers
- Video Generators
- Broadcast & TV Distribution
- Antennas
- Signal Amplifiers
- Electromagnetic Field Testers
- Electrostatic Discharge Testers
- EMC & EMI Test
- Anechoic Chambers
- Multifunction Calibrators
- Temperature Calibrators
- Pressure Calibrators
- Electrical Energy Calibration
- LCR Calibration
- Infrared Thermal Cameras
- Environment Testers
- Sound & Vibration Testers
- Gas Analyzers
- Water Leak detectors
- Soldering Rework Stations Tools
- Precision Balances
- Topographic Measurements
- Biomedical Equipments
- Microscopes
- Spectrometers
- Video Inspection Borescopes
- Ultrasound Inspection Systems
- Technical Training Systems
Recommended products
10kV MOA zinc oxide lightning arrester DC Leakage Current Characteristics Tester Testyle 1075
Code: Testyle 1075
Product Datasheet (*.PDF - 0.14 Mb)TE1075 10KV MOA DC characteristic Tester, which is widely used for the automatic measurement of residual voltage values under 1mA and leakage current values under 0.75mA of 10KV and below voltage rating MOA, and is applicable to MOA field test in 10kV (6kV) distribution network., With internal rechargeable battery, it can work normally in the field conditions when there is no AC220 power supply.In accordance with IEC standards IEC 61010-1. Safety requirements for electrical equipments used in measurement, control and laboratory.
(1) A variety of power supply mode. Can be operated by the 220V AC, or the built-in rechargeable battery, as well as the external DC power supply.
(2) Automatic completion of the testing process.
(3) Equipped with special high-voltage socket and cable, the High-voltage line could be dragged.
(4) Allowed one end grounded for operation can achieve test without disassembly.
(5) Through the JTAG online programming interface, the device can upgrade on-site needn’t disassembled.
|
Power Supply |
External DC24V power supply |
|
Voltage : AC220V±10% Frequency : 50Hz±1Hz | |
|
Built-in rechargeable battery power supply. | |
|
Executive Standard |
IEC 61010-1. Safety requirements for electrical equipments used in measurement, control and laboratory. |
|
Service condition |
Ambient temperature : -10℃～40℃ Relative humidity : ≤80% |
|
Dimensions |
Length340mm*Width300mm*Height320mm |
|
Weight |
8Kg(Exclude accessories) |
|
Measurement Accuracy |
The Accuracy Rating of the instrument is one grade |
|
Instrument Power |
The rated power loss of the instrument < 30W |
|
Security |
Insulation resistance : >2MΩ |
|
Leakage current : <1.000mA | |
|
Dielectric Strength: Power connection line on the chassis can withstand 1500V (50Hz RMS) 1 minute. | |
|
Test items and range |
When the leakage current is 1mA ,the output voltage is U1mA: 0～30KV. |
|
The leakage current under 75% of U1mA is I0.75:0～1.000 mA. |
Copyright © 2010 - 2024 / Distek