Analyser that incorporates all the functions for the installation, verification and maintenance of CATV systems. It includes different configurations to measure in channel parameters such as Signal Level, Channel Power, V/A, C/N, CSO and CTB. Many different ways of presenting the information can be selected such as Channel measurements, SCAN, Spectrum with max. and min. hold, Datalogger, TILT, etc.

MEASUREMENTS	Digital Channel Power, Signal Level, V/A, C/N, CSO & CTB
PRESENTATION MODES	Channel measurements, channel sweep, spectrum with Max-Min hold, data acquisition, tilt
RESOLUTION	10 kHz

More products PROMAX

COLOR VIDEO SIGNAL PATTERN GENERATOR PAL/ NTSC/ SECAM PROMAX GV-198

• PAL B/G, D/K, I, N, NTSC M, SECAM B/G, D/K, L Standards
• Direct acces keys for nine different chars
• 4:3 & 16:9 formats
• Addition of an electronic circle
• Double side band modulation

IP RECEIVER -> 4 X DVB-ASI TRANSPORT STREAM PROMAX DT-324

• IP INPUT: Ethernet 100/1000 Mbps. RJ45 connector
• TS OUTPUT: 4 x DVB-ASI. BNC Female connector, 75 ?
• Communication protocol: UDP or RTP/UDP communication protocol
• Transmision methode: MULTICAST / IGMP Version 2
• Payload: From 1 to 7 packets MPEG-2

WIRELESS BAND DOWN-CONVERTER5.7..5.8 GHZ -> 1.5..1.6 GHZ PROMAX CV-589

• down converter for the 5.7 to 5.8 GHz frequency range to 1500 to 1600 MHz
• Converts signals from ISM 5.8 GHz to IF satellite band
• Supply from the signal level meter

RF POWER DVB-T AMPLIFIER COFDM SIGNAL 1W 30DBM PROMAX DT-730

• FREQUENCY BANDS: UHF from 470 MHz ~ 862 MHz
• 1 W RF power amplifier for COFDM signals
• both for single carrier or multicarrier system
• provides an amplified output of 30 dBm (137 dBµV)
• preserves the original signal quality and maintains a low noise levels

TRANSMODULATOR DVB-S -> DVB-T PROMAX DT-202

• DVB-S FI INPUT: 2 independent DVB-S FI inputs
• RF OUTPUT: 2 combined DVB-T multiplexes
• PID Filtering with Filtering Table up to 32 PID
• Measurement: Bitrate of the output multiplex
• includes an internal combiner that delivers a single DVB-T output with high C/N

DVB-T/ DVB-H MONITORING & CONTROL SYSTEM 6 CHANNLES PROMAX PROWATCH TELMO

• remote control and measuring of Digital Terrestrial Television (DTT)
• compact module, designed for an easy integration
• operating on its own, controlling the quality of service parameters for up to 6 multiplex
• Warning and Alarm that can activate switches

DIDACTIC TRAINING SYSTEM FOR ANALOGUE COMMUNICATIONS PROMAX EC-696

• MODULATIONS: AM, FM, PWM, FDM
• INPUTS / OUTPUTS: Generator, microphone / Oscilloscope, headphones
• TRANSMISSION: Two-wire, coaxial, Fibre Optics, Infra Red & Radio

CATV/ SMATV COAXIAL CABLE TEST SIGNAL GENERATOR 5..2150 MHZ PROMAX RP-110

• CATV and SMATV coaxial cable bands
• six pilots of frequency and level selectable by the user
• 8 preset memories for the six pilot signals.
• Frequency resolution: 25 kHz.
• User interface in several languages.
• USB to PC connection for firmware updating and to configure frequencies and levels.

PROMAX TV EXPLORER NG UNIVERSAL TV VIDEO SIGNAL AND SPECTRUM ANALYZER ULTRA-HD 4K

• next-generation TV EXPLORER, now with native 4K support, DVB-T2, ISDB-T/Tb
• optionally ATSC 3.0 and DVB-S2x
• Its multi-touch user interface offers smartphone-like intuitiveness, making navigation effortless.

COMBINER 16 X DVB-T -> 4 X DVB-T PROMAX DT-700

• INPUTS FOR EACH COMBINER: 4 BNC female inputs 75 ? (16 total)
• OUTPUTS FOR EACH COMBINER: 1 BNC female output 75 ? (4 total)
• allows many different combinations to adapt to the needs of each system as best as possible
• used to mix the output RF signals of the COFDM modulators and transmodulators
• preserves better the original quality and maintains lower noise levels

CATV Cable Network Analyzer Promax-8 SEOBSOLET PRODUCT ( * OUT OF USE )

CATV Cable Network Analyzer Promax-8 SE
OBSOLET PRODUCT ( * OUT OF USE )