Agilent 16801A Portable Logic Analyzer 34 channels

Code: Agilent 16801A


 

Datasheet PDF, 1.09 Mb

Description

  • 34-channel portable logic analyzer
  • 4 GHz (250 ps) timing zoom with 64 K memory
  • 1.0 GHz / 500 MHz (half / full-channel) conventional timing with deep memory
  • 500 MHz transitional timing
  • up to 250 MHz State clock rates
  • up to 250 Mb/s Data rates
  • up to 32 M acquisition memory depth
  • 15-inch (38.1 cm) color display with touch screen available(option 103)
  • Comprehensive single-ended signal support, threshold is adjustable in -5 V to 5 V (10 mV increments)
  • Automated threshold/sample position setup for accurate measurements on high-speed buses
  • Simultaneous eye diagrams on all channels identify problem signals quickly
  • Selectable memory depths: 1 M, 4 M, 16 M, 32 M
 

Recommended options

16800A-0B3

Service Manual

16800A-103

Front Panel with 15 inch display and touchscreen

16800A-109

External removable hard drive for 16800 series logic analyzers

16801A-001

Standard 1 M acquisition memory depth

16801A-004

Increase acquisition memory depth to 4M

16801A-016

Increase acquisition memory depth to 16M

16801A-032

Increase acquisition memory depth to 32M

16801A-A6J

ANSI Z540 Compliant Calibration

E5346A

Probe, 34 channel single-ended Mictor connector, connects to 40-pin LA cable

E5383A

Probe, 17-channel single-ended flying leads, connects to 40-pin LA cable

E5385A

Probe, 34 channel single-ended Samtec connector, connects to 40-pin LA cable

E5394A

Probe, 34 channel single-ended soft touch connectorless, connects to 40-pin LA cable

E5394A-001

Retention Module

E5396A

Probe, 17 channel single-ended soft touch connectorless, connects to 40-pin LA cable

E5396A-001

Retention Modules

E5403A

Kit of 5 retention modules for Pro Series Soft Touch Connectorless Probes

E5404A

Probe, 34 channel, soft touch pro, single-ended, connects to 40-pin LA cable

 

More products KEYSIGHT

AGILENT 33210A FUNCTION / ARBITRARY WAVEFORM GENERATOR 10 MHZ

• 10 MHz sine and square waveforms
• Ramp, triangle, noise, and DC waveforms
• Option 002 provides 14-bit, 50 MSa/s, 8-Kpoint arbitrary waveform generation

 

PXI MULTIPLEXER MODULE 64-CHANNELS 100V/1A AGILENT M9101A

• 64-channel, high-density 2-wire switch multiplexer
• 100Vrms
• 0.5A/1.0A switch/carry current
• 10W max power
• High-speed 500 usec reed relays
• Break-before-make or simultaneous switch closures

 

AGILENT E5071C ENA NETWORK ANALYZER 100 KHZ..4.5/ 6.5/ 8.5/ 14/ 20 GHZ

• Frequency options:
• 9 kHz - 4.5 GHz/ 6.5 GHz/ 8.5 GHz
• 100 kHz - 4.5 GHz/ 6.5 GHz/ 8.5 GHz (with bias tees)
• 300 kHz - 14 GHz/ 20 GHz (with bias tees)

 

USB THERMOCOUPLE INPUT MODULE 31-CHANNELS AGILENT U2802A

• Up to 31 thermocouple inputs
• Configurable for thermocouple or voltage input mode independently
• Voltage input range up to 10V
• Supports thermocouple type J, K, R, S, T, N, E and B

 

MULTIPLEXER MODULE QUAD 4-CHANNELS 75 OHM AGILENT 34942A

• Quad 4-channel multiplexers
• DC to 1.5 GHz, 75 Ohm
• High isolation, low VSWR
• 30V, 0.5A, 10W switching
• 75 Ohm mini SMB connectors

 

AGILENT 6812B AC POWER SOURCE & ANALYZER 750VA

• Power: 750 VA
• Voltage rms: 300 V
• Current rms: 6.5 A
• Repetitive & non-repetitive peak current: 40 A

 

USB MODULAR DIGITAL I/O 32-CH. INPUT+32-CH. OUTPUT AGILENT U2651A

• Hi-Speed USB 2.0 (480 Mbps)
• 32 Input opto-isolated lines
• 32 Output opto-isolated lines
• Functions as standalone or modular unit
• Up to 1250 Vrms isolation protection

 

USB MODULAR DATA ACQUISITION UNIT 4-CHANNELS 250KSA/S SIMULTANEOUS AGILENT U2541A

• High speed USB 2.0 (480MBit/s)
• 16-bit resolution
• simultaneous analog input channels
• up to 250 kSa/s/ch
• 2 12-bit analog output channels
• 1 MSa/s analog output update rate
• 24-bit programmable TTL input/output channels

 

DIGITAL OSCILLOSCOPE 2 X 200 MHZ AND LOGIC ANALYZER 8 CHANNELS AGILENT MSOX2022A

• 200 MHz bandwidth
• 2 analog channels plus 8 digital channels
• 1GSa/s per channel sample rate

 

AGILENT N9010A EXA RF SPECTRUM ANALYZER 9 KHZ..3.6 / 7 / 13.6 / 26.5 GHZ

• 9 kHz to 3.6 GHz, 7.0 GHz, 13.6 GHz or 26.5 GHz
• 10 MHz (standard), 25 or 40 MHz (optional) analysis bandwidth
• Basic EMI precompliance measurement capability available
• Advanced analysis of more than 70 signal formats