The GPC-Series are triple output, 195 to 375W, linear DC power supplies. Channel 1 and 2 are fully adjustable (model dependant) and Channel 3 is fixed at 5V/3A with ripple and noise at less than 2mVrms. Overload and reverse polarity protection keep GPC-Series and its loads safe from unexpected conditions.The GPC-3030DQ contains a temperature controlled cooling fan for thermal protection.The GPC features continuous or dynamic internal load selection and serial or parallel tracking for application flexibility.The GPC-Series is an ideal solution for inexpensive bench-top applications requiring low noise and multiple outputs.

Features:

Four Digital Panel Meters (GPC-3030DQ)
Triple Output
Auto Tracking
Auto Series and Parallel Operation
Constant Voltage and Constant Current Operation
Low Ripple and Noise
Internal Select for Continuous or Dynamic Load
Overload and Reverse Polarity Protection
3 1/2 Digits 0.39" LED Display(GPC-3030DQ)
3 1/2 Digits 0.5" LED Display(GPC-1850D/3030D/3060D/6030D)
5V, 3A Fixed Output
(Note: GPC-3060D/6030D are not CE approved)

More products INSTEK

GOODWILL INSTEK GAD-201G

• Automatic level & distortion measurements
• Auto or Hold function selectable
• 0.1% ~ 100% in 7 distortion measuring ranges
• 20Hz ~ 20kHz in 3 continuous ranges
• 400Hz, 1kHz, 10kHz 3 frequency spots
• 1mVrms ~ 300Vrms in 12 ACV measuring ranges

ANALOG OSCILLOSCOPE 2 X 50 MHZ GW INSTEK GOS-6050

• 50 MHz bandwidth
• 2 analog channels
• 1mV/div ~ 20V/div

GW INSTEK GPT-9901A GPT-9902A GPT-9903 GPT-9904 HIPOT WITHSTANDING TESTER

• 500VA AC Test Capacity
• 240x64 Ice Blue Dot matrix LCD
• Sweep Function for DUT characteristic analysis
• Insulation resistance measurement up to 50GO(GPT-9903/9904)
• Manual/Auto Mode
• Interface : RS-232C, USB device, Signal I/O and GPIB (optional)

GOODWILL INSTEK PPT-SERIES

• Auto Step Running With Timer Setting
• FRONT/REAR Output and Sense Switch Selectable
• Triple Output
• Auto Series and Parallel Operation
• Auto Tracking

GOODWILL INSTEK PEL-2000A SERIES

• Multiple independent load inputs up to 8 channels in a mainframe
• Parallel connection of inputs for increased load capacity
• Parallel connection of inputs for static and dynamic tests
• OPP/OCP/OVP/OTP protections

GOODWILL INSTEK PSH-SERIES

• Over voltage over current and over temperature protection
• Low ripple and noise
• Output on/off control
• Self-test and software calibration

DIGITAL OSCILLOSCOPES 2/4CH. 70/100/200/300MHZ INSTEK GDS-2000A

• GDS-2072A 70MHz ,2-channel ,Visual Persistence DSO
• GDS-2074A 70MHz ,4-channel ,Visual Persistence DSO
• GDS-2102A 100MHz ,2-channel ,Visual Persistence DSO
• GDS-2104A 100MHz ,4-channel ,Visual Persistence DSO
• GDS-2202A 200MHz ,2-channel ,Visual Persistence DSO
• GDS-2204A 200MHz ,4-channel ,Visual Persistence DSO
• GDS-2302A 300MHz ,2-channel ,Visual Persistence DSO
• GDS-2304A 300MHz ,4-channel ,Visual Persistence DSO

GOODWILL INSTEK PSP-SERIES

• LCD display
• Output on/off control
• 3-step fan speed control
• Voltage/current/power settings

GOODWILL INSTEK LCR-900 SERIES

• Parallel/Series Testing Mode
• Sorting Mode for Quality Control
• 2Wire or 5Wire Measurement Available
• Data Hold and Zero Mode Supported

GOODWILL INSTEK GFG-8200A SERIES

• Frequency Range: 0.3Hz ~ 3MHz (GFG-8215A/8216A/8217A/8219A)
• Frequency Range: 0.5Hz ~ 5MHz (GFG-8250A/8255A)
• Waveforms: Sine, Triangle, Square,Ramp, TTL and CMOS Output
• External Voltage Controlled Frequency (VCF) Function