Frequency range :9KHz~3.2GHz;
Optimal sensitivity: -161dBm;
RBW:10Hz to 1MHz.
High protection portable design, sturdy and durable
can be used in laboratory, more suitable for field mobile use
built-in large capacity lithium battery, can work for more than 4 hours. 18650 rechargeable battery.
USB/LAN communication, easy for long-range control.
5.6 inch highlight color display, 640*480 resolution, waveform display clearly.

Features:

Frequency range: 9KHz-3.2GHz (tunable to 9KHz) AC Coupled
Optimal sensitivity: -161dBm RBW:10Hz to 1MHz
IP-51 High protection portable design, sturdy and durable, can be used in laboratory, more suitable for field mobile use.
built-in large capacity lithium battery, can work for more than 4 hours. 18650 rechargeable battery.
5.6 inch highlight color display, 640*480 resolution, waveform display clearly.
HSA2000 Series spectrum analyzer has the lowest DANL and SSB phase noise, and narrowest RBW. It greatly enhances the recognition ability to the spurious signal and noise signal.
Optional FM/AM modulation analysis, including carrier power, modulation rate, AM depth/FM deviation, SINAD and carrier frequency offset.
Standard spectrum feature. It can analyze the signal time stability, and find out lacunar signal in communication system accurately.
Strong field strength test function, fit for the test work in transmitter, base station and the antenna coverage site. It can show the density of field strength or power. The user could also calibrate gain or loss by using amplitude offset function.
HAS2000 Series has least RBW in the same level of analyzers, and can easily confirm, distinguish and measure two similar signals.
The 5.7 inch highlight color display can provide accurate, bright and clear trace both inside and outside, no need to move to shading place for work.
Short scanning time. It can fast catch the data and help to locate and recognize the irregular transient disturbance signal, and then optimize the testing time and accuracy.
Advanced built-in battery management system is adopted. Standard super large capacity-7800mAh lithium battery, and support 6 packs of 18650 battery pack which can keep measurement working in site for over 4 hours.
Firm and tight mechanical structure, close rubber sleeve pack, which is fit for harsh site work environment.
Integration USB Host & Device, support USB flash disk memory, optional WIFI/LAN, which is convenient for networking and long-range control.
Its PC software can achieve the management and storage of testing data.
HSA2000 Series site measurement application.

More products HANTEK

HANTEK DSO8000E PORTABLE SCOPEMETER WITH GENERATOR

• High bandwidth 70MHz-200MHz Oscilloscope, 1GSa/s sample rate, 2M Memory depth.
• 25Mz Arb. Waveform Generator, 200 Mesa/s DDS, 12 bit vertical resolution, easy for simulating transducer
• 6000 Counts DMM, AC/DC voltage, AC/DC current, resistance, break, capacitance, and diode function.
• FFT spectral analysis; Waveform Math: add, subtract, multiply and divide; X-Y mode; more than 20 automatic measurements; PASS/FAIL Check function, apply to engineering application.

HANTEK LA5034 LOGIC ANALYZER

• Continuously variable pre/post trigger position,Advanced Multi-Level Triggering
• +6V to -6V Adjustable Logic Threshold
• CAN, I2C, SPI and RS232 Interpreters
• Built-in 250MHz Frequency Counter

HANTEK 1008A USB OSCILLOSCOPE 8-CHANNELS

• USB 2.0 interface plug and play, and no need extra power supply;
• More than 20 types of automatic testing function, a similar interface with benchtop oscilloscope, easy to use;
• Software support: Windows NT, Window 2000, Windows XP, VISTA, Windows 7, Windows 8.

HANTEK MSO5000D DIGITAL SCOPE WITH LOGIC ANALYZER

• 200/100/60MHz bandwidth
• 1GSa/s Real Time sample rate
• Large (7.0-inch) color display,WVGA(800x480)
• Record length up to 1M

HANTEK AC/DC CURRENT CLAMP CC-65

• AC/DC frequency range: Up to 20 kHz
• Effective Measurement Range: 20mA to 65A DC
• It is a transducer which allows your multimeter to measure current data and enable your oscilloscope to measure the current waveforms.

HANTEK DSO1000S PORTABLE OSCILLOSCOPE WITH ISOLATED CHANNELS

• Isolated level: 1000V CATII, 600V CATIII.
• High Bandwidth 60MHz-200MHz Oscilloscope, 1GSa/s sample rate, 6000 Counts DMM with analog barograph and data recorder.
• 1M Memory Depth.
• High Refresh Rate (2500 frames).
• Large 5.6 inch TFT Color Display, High Resolution(640*480), Dual-Window Design --More clear, More detailed.

HANTEK DSO4004B SERIES BENCH OSCILLOSCOPES

• Serial bus triggering and decode, Bus protocol information can be quickly and intuitively displayed in table form.
• Integrated USB Host/Device, convenient to communicate with PC. Support U-stick storage/systerm update.
• Support a variety of SCPI remote control command
• Support optional RS232 port, LAN port. (Optional)

HANTEK IDSO USB OSCILLOSCOPE

• Software Support:IOS,Android(Partial function),Win10,Win8, Win7, VISTA, etc.
• More than 20 kinds of automatic measurement function, PASS/FAIL Check function, fit for engineering application.
• FFT spectrum analyzer
• Waveform averaging, afterglow, lightness control, reverse, add, subtract, multiply, divide, X-Y display.
• The waveform data can be output as EXCEL, BMP, JPG according to time and voltage.

DSO3064 KIT VII AUTO DIAGNOSE OSCILLOSCOPE KIT

• First Diagnosis(Cranking Exhaust Diagnosis)
• Ignition Action(Current/Voltage)
• The Sensor(Air Flow Meter,Camshaft,Crankshaftˇ)
• Bus Diagnosis(CAN Bus Data View)
• Performer(Petrol/Diesel)

HANTEK DSO1000E RUGGED OSCILLOSCOPE PORTABLE

• Abundant trigger function, double timebase sampling, easy to observe two waveforms in different frequency.
• Record and replay of more than 1000 waveforms.
• Large 5.6 inch TFT Color LCD Display; High Resolution(640*480)
• USB Host/Device 2.0 full-speed interface; support removable disk; WIFI/LAN Option, easy to control by PC or long-distance.
• Waveform data can be output in WORD�¼�EXCEL, BMP, JPG as time and voltage.