Extech EX650 600A True RMS AC Clamp Meter + NCV

Code: Extech EX650


 

Datasheet PDF, 0.53 Mb

Description

AC Clamp Meter with Non-Contact Voltage Detector and Low Impedance

The EX650 is a 600A True RMS AC Clamp meter. This clamp meter also measures AC/DC voltage, resistence, capacitance, continuity/diode test and has an NCV detector. The EX650 has a 1.18" jaw size which accomodates conductors up to 350 MCM. This meter also features a 6000 count backlit LCD display, data hold, min/max, relative function, auto power off and a convenient LED worklight. Complete with test leads and 3 AAA batteries.

 

·         True RMS for accurate AC measurements

·         1.18" (30mm) jaw size accomodates conductors up to 350MCM

·         6000 count backlit LCD display

·         Low Impedance (LoZ) prevents false reading caused by ghost voltages

·         Built-in non-contact voltage detector (NCV) with LED indicator

·         Built-in LED flashlight for working in dimly-lit areas

·         Functions include: NCV, AC/DC Voltage, AC Current, AC/DC micro Current, Resistance, Capacitance, Diode Test, Continuity

·         Data Hold, Min/Max, Relative function, Auto Power Off

·         Complete with test leads and 3 AAA batteries

 

More products EXTECH

EXTECH MA130 MINI 200A AC CLAMP METER

• Mini pocket-sized design
• Backlit LCD display
• 0.6" (16mm) jaw size fits conductors up to 300MCM
• Data Hold freezes reading on display
• Max Hold displays maximum reading
• Large LCD with backlit feature for viewing in dimly lit area

 

EXTECH CT40 CABLE IDENTIFIER/TESTER KIT

• Troubleshoot electrical/electronic circuits and identify up to 16 local or installed lines
• MultiMeter functions include: AC/DC Voltage and Current, Resistance, Diode, and Continuity
• Transmitter/Receiver enables one person to remotely identify up to 16 wires
• Wire voltage check from 5 to 16VDC
• Data Hold and Max Hold, Auto power off

 

EXTECH RHT35 USB HUMIDITY/TEMPERATURE/BAROMETRIC PRESSURE DATALOGGER

• Compact size housing with built-in NTC thermistor, capacitive humidity sensor, and barometric pressure MEMS sensor designed with standard USB connector for easy data downloading to a PC
• 5-digit LCD display with battery life indicator
• User programmable settings: 6 languages, sample rate, start delay time, alarm delay time, high/low alarm range, and security feature
• Status Indication via Red and Green LEDs
• Start button begins continuous datalogging, which continues until memory is full at 48,000 readings (16K for each parameter), or when Stop button is pressed
• Bookmark 8 locations in a data recording log with a press of the Mark button

 

EXTECH CT80: AFCI, GFCI AND AC CIRCUIT ANALYZER

• Selectable loads of 12, 15 and 20 Amps
• Measures loaded and unloaded AC Line Voltage
• Calculates and displays % Voltage Drop and Line Impedance
• Displays Peak Line Voltage and Frequency

 

EXTECH HT200 HEAT STRESS WBGT (WET BULB GLOBE TEMPERATURE) METER

• Meter accurately determines the Heat Stress level by factoring a combination of humidity, temperature, air movement, and direct solar radiation
• Uses a capacitance sensor to accurately measure Wet Bulb Globe Temperature (WBGT), Black Globe Temperature (TG), Relative Humidity (%RH), Air Temperature (TA), Wet Bulb (WT) and Dew Point (DEW)
• Black Globe Temperature (TG) monitors the effects of direct solar radiation on an exposed surface
• In/Out function displays the WBGT value with or without direct sun exposure

 

EXTECH 380360 DIGITAL MEGOHMMETER

• Three test voltages of 250V, 500V and 1000V
• Insulation Resistance to 2000MOhm
• Safety Power Lock enables "hands free" operation for 3 minute test
• Automatic discharge when safety "Press to Test" button is released
• Continuity measurements to 200Ohm and Voltage to 600VAC

 

EXTECH MO210 POCKET MOISTURE METER

• Use on wall board, sheet rock, cardboard, plaster, concrete, and mortar
• Replaceable threaded measurement electrode pins
• Self-contained, pocket sized meter with belt clip

 

EXTECH PQ3350-3 3-PHASE POWER & HARMONICS ANALYZER

• Datalogging of single and 3-phase/3-wire or 3-phase/4-wire systems (up to 52,428 single phase readings or 17,476 3-phase readings)
• Flexible clamp probes can be used for wrapping around bus bars and wire bundles
• Large backlighting LCD displays up to 35 parameters in one screen
• Clamp-on True RMS power measurements with on-screen Harmonics display
• Simultaneous display of Harmonics and Waveform

 

EXTECH 48VFL11 1/16 DIN TEMPERATURE PID CONTROLLER WITH ONE RELAY OUTPUT

• One relay output
• Dual 4-digit LED displays of process and setpoint values
• User friendly menus and tactile keypad for easy programming
• One-touch autotuning for quick setup & precise control
• Fuzzy Logic PID offers intuitive control simulating human control logic

 

EXTECH 38387 600A AC CLAMP + MULTIMETER

• Measure AC Current, AC/DC Voltage and Resistance
• 1.25" (33mm) circular jaw opening for large cables (350MCM)
• Large 2000 count LCD display
• Data Hold freezes data in display
• Peak Hold captures in-rush currents
• Audible Continuity beeper